________________________________________________________________________________________
Briggs and Stratton 31F707 Specifications
| Engine Model: Briggs and Stratton 31F707 |
| Engine Type: 4-cycle single cylinder OHV vertical shaft gasoline engine |
| Total Displacement: 30.6 cu.in (501 cc) |
| Rated Engine Power: 17 Hp (12.7 kW) at 3600 rpm |
| Fuel System: Float type carburetor with fixed main jet |
Engine Model ................ Briggs and Stratton 31F707
Engine Type ................ 4-cycle single cylinder OHV vertical shaft air-cooled gasoline engine
Number of Cylinders ................ 1
Displacement, cu.in (cc) ................ 30.6 (501)
Cylinder Bore, in (mm) ................ 3.56 (91.0)
Piston Stroke, in (mm) ................ 3.06 (78.0)
Rated Engine Power, hp (kW) ................ 17.0 (12.7)
Rated Engine Speed, rpm ................ 3600
Idle Speed, rpm ................ 1750
Cylinder Bore Type ................ Cast iron sleeve
Lubrication System ................ Oil pump with filter
Air Cleaner ................ Dual element (paper and foam)
Cooling System ................ Forced air
Ignition System ................ Electronic
Starting System ................ Electric starter
Electrical System Rating, Volts ................ 12
Charging System Rating, Amps ................ 9
Fuel System Type ................ Carburetor
Carburetor Type ................ Float
Fuel Pump ................ Pulse type
Governor Type ................ Mechanical
Fuel Type ................ Gasoline
Cylinder Bore I.D. (Standard), in (mm) ................ 3.563 (90.50)
Cylinder Bore I.D. (Maximum), in (mm) ................ 3.567 (90.60)
Cylinder Bore (Out-Of-Round), in (mm) ................ 0.0015 (0.04)
Main Bearing Bore Dia. (Cylinder Block), in (mm) ................ 1.3795 (35.04)
Main Bearing Bore Dia. (Crankcase Cover), in (mm) ................ 1.063 (27.00)
Camshaft Bearing Bore Dia. (Cylinder Block), in (mm) ................ 0.5011 (15.88)
Camshaft Bearing Bore Dia. (Crankcase Cover), in (mm) ................ 0.501 (12.72)
Crank Pin Journal O.D. (Standard), in (mm) ................ 1.4982 (38.05)
Crank Pin Journal O.D. (Wear Limit), in (mm) ................ 1.497 (31.02)
Crankshaft Journal O.D. (Magneto Side), in (mm) ................ 1.3775 (35.00)
Crankshaft Journal O.D. (PTO Side), in (mm) ................ 1.3775 (35.00)
Crankshaft Eccentrics (Standard), in (mm) ................ 2.2045 (55.91)
Crankshaft Eccentrics (Wear Limit), in (mm) ................ 2.202 (55.93)
Crankshaft End Play, in (mm) ................ 0.002-0.023 (0.05-0.58)
Camshaft Journal O.D. (Magneto Side), in (mm) ................ 0.499 (12.67)
Camshaft Journal O.D. (PTO Side), in (mm) ................ 0.499 (12.67)
Connecting Rod Big End I.D. (Standard), in (mm) ................ 1.2505 (31.76)
Connecting Rod Big End I.D. (Wear Limit), in (mm) ................ 1.2525 (31.81)
Connecting Rod Small End I.D. (Standard), in (mm) ................ 0.8006 (20.33)
Connecting Rod Small End I.D. (Wear Limit), in (mm) ................ 0.802 (20.37)
Counterweight Bearings Dia. (Standard), in (mm) ................ 2.207 (56.05)
Counterweight Bearings Dia. (Wear Limit), in (mm) ................ 2.210 (56.13)
Cylinder Head (Max Out of Flatness), in (mm) ................ 0.004 (0.10)
Intake Valve Clearance, in (mm) ................ 0.003-0.005 (0.08-0.13)
Exhaust Valve Clearance, in (mm) ................ 0.005-0.007 (0.13-0.18)
Valve Guide I.D. (Standard), in (mm) ................ 0.237 (6.02)
Valve Guide I.D. (Wear Limit), in (mm) ................ 0.240 (6.10)
Intake Valve Stem O.D. (Standard), in (mm) ................ 0.235 (5.97)
Intake Valve Stem O.D. (Wear Limit), in (mm) ................ 0.233 (5.92)
Exhaust Valve Stem O.D. (Standard), in (mm) ................ 0.235 (5.97)
Exhaust Valve Stem O.D. (Wear Limit), in (mm) ................ 0.233 (5.92)
Cam Lobes (Intake), in (mm) ................ 1.240 (31.49)
Cam Lobes (Exhaust), in (mm) ................ 1.240 (31.49)
Piston Pin O.D. (Standard), in (mm) ................ 0.7998 (20.31)
Piston Pin O.D. (Wear Limit), in (mm) ................ 0.799 (20.29)
Piston Pin Bearing I.D. (Standard), in (mm) ................ 0.8006 (20.33)
Piston Pin Bearing I.D. (Wear Limit), in (mm) ................ 0.802 (20.37)
Top Ring End Gap (Standard), in (mm) ................ 0.006-0.009 (0.15-0.23)
Second Ring End Gap (Standard), in (mm) ................ 0.014-0.018 (0.35-0.45)
Oil Ring End Gap (Standard), in (mm) ................ 0.006-0.010 (0.15-0.25)
Piston Ring End Gap (Wear Limit), in (mm) ................ 0.030 (0.76)
Top Ring Side Clearance (Standard), in (mm) ................ 0.002-0.005 (0.05-0.12)
Second Ring Side Clearance (Standard), in (mm) ................ 0.002-0.005 (0.05-0.12)
Oil Ring Side Clearance (Standard), in (mm) ................ 0.002-0.005 (0.05-0.12)
Piston Ring Side Clearance (Wear Limit) ................ 0.007 (0.18)
________________________________________________________________________________________
________________________________________________________________________________________
| Engines Technical Specifications |
| Lawn and Garden Tractors Technical Specs |
| Farm Tractors Technical Specifications |
