________________________________________________________________________________________
| Home / Engines / Kohler Engines / Kohler CV460S |
Kohler Command CV460S Specs
The Kohler CV460S is a 460 cc (27.9 cubic inches) single-cylinder air-cooled
four-stroke internal combustion gasoline engine from the Command PRO
series, manufactured by Kohler Co.
The Kohler CV460S engine has an OHV (overhead valve) design, an aluminum
block with cast iron cylinder liners, vertical PTO-shaft,
full-pressurized lubricating system. The engine is equipped with a
carburetor (Nikki or Keihin) with a fixed main jet and dependable
electronic magneto ignition system.
A 87.0 mm (3.43 in) cylinder bore and 77.0 mm (3.03 in) piston stroke
provide a total engine displacement of 398 cc. The compression ratio
rating is 8.5:1.
The engine produced 16.2 PS (11.9 KW; 16.0 HP) at 3,600 rpm of
horsepower and 36.3 Nm (3.7 kgm; 26.8 ft-lb) at 2,400 rpm of maximum
torque.
Engine code identification:
C - Command series,
V - Vertical PTO shaft,
460 - Displacement (cc),
S - Electric Start.
| General Technical Data |
Engine Model .............. Kohler Command CV460S
Engine Type .............. 4-cycle 1-cylinder vertical shaft air-cooled gasoline engine
Number of Cylinder .............. 1
Displacement, cc (cu.in) .............. 460 (27.9)
Engine Bore, mm (in) .............. 87.0 (3.43)
Engine Stroke, mm (in) .............. 77.0 (3.03)
Engine Power, Hp (kW) .............. 16.0 (11.9)
Maximum Torque, Nm (ft-lb) .............. 36.3 (26.8)
Torque Speed, rpm .............. 2500
Cooling System .............. Air-cooled
Air Cleaner .............. Replaceable, high density paper element
Lubrication System .............. Full-Pressure
Oil Pump Type .............. Gerotor
Oil Filter Type .............. Full-flow
Ignition System .............. Electronic with spark advance
Starting System .............. Electric starter
Electrical System Rating, Volts .............. 12
| Fuel System |
Fuel System Type .............. Carburetor
Carburetor Model .............. Walbro or Nikki
Carburetor Type .............. Float with fixed main jet
Fuel Pump Type .............. Diaphragm, mechanical pump
Fuel Filter Type .............. In-line
Governor Type .............. Centrifugal mechanical flyweight
| Dimensions and Weight |
Overall Length, mm (in) .............. 453 (17.9)
Overall Width, mm (in) .............. 377 (14.9)
Overall Height, mm (in) .............. 314 (12.4)
Dry weight, kg (lbs) .............. 41.8 (90)
| Cylinder Block |
Cylinder Bore Inside Diameter (Std), mm (in) .............. 87.000-87.025 (3.4252-3.4262)
Cylinder Bore Inside Diameter (Max), mm (in) .............. 87.063 (3.4277)
Cylinder Bore (Max Out of Round), mm (in) .............. 0.12 (0.0047)
Crankshaft End Play, mm (in) .............. 0.0575-0.4925 (0.0022-0.0193)
Crankshaft Bore (Crankcase), mm (in) .............. 44.965-44.990 (1.7702-1.7712)
Crankshaft Bore (Oil Pan), mm (in) .............. 41.960-42.035 (1.6519-1.6549)
Crankshaft Bore to Crankshaft Clearance, mm (in) .............. 0.0300-0.0880 (0.0011-0.0034)
Connecting Rod to Crankpin Clearance, mm (in) .............. 0.030-0.055 (0.0012-0.0022)
Connecting Rod to Crankpin Side Clearance, mm (in) .............. 0.18-0.41 (0.007-0.016)
Connecting Rod to Piston Pin Clearance, mm (in) .............. 0.015-0.028 (0.0006-0.0011)
Connecting Rod Journal Outside Diameter, mm (in) .............. 38.958-38.970 (1.5338-1.5343)
Camshaft End Play, mm (in) .............. 0.076-0.127 (0.0030-0.0050)
Camshaft Clearance, mm (in) .............. 0.025-0.105 (0.00098-0.0041)
Camshaft Bore Inside Diameter, mm (in) .............. 20.000-20.025 (0.7874-0.7884)
Camshaft Bearing Outside Diameter, mm (in) .............. 19.962-19.975 (0.7859-0.7864)
| Cylinder Head and Valves |
Cylinder Head (Max Out of Flatness), mm (in) .............. 0.076 (0.003)
Hydraulic Valve Lifter to Crankcase Clearance, mm (in) .............. 0.0124-0.0501 (0.0005-0.0020)
Valve Stem to Valve Guide Clearance (Intake), mm (in) .............. 0.038-0.076 (0.0015-0.0030)
Valve Stem to Valve Guide Clearance (Exhaust), mm (in) .............. 0.050-0.088 (0.0020-0.0035)
Valve Guide Inside Diameter, mm (in) .............. 7.038-7.058 (0.2771-0.2779)
Valve Minimum Lift (Intake), mm (in) .............. 8.96 (0.353)
Valve Minimum Lift (Exhaust), mm (in) .............. 9.14 (0.360)
Valve Face Angle, degrees .............. 45
Valve Seat Angle, degrees .............. 89
Valve Insert Outside Diameter (Intake), mm (in) .............. 37.987-38.013 (1.5015-1.5024)
Valve Insert Outside Diameter (Exhaust), mm (in) .............. 33.987-34.013 (1.3434-1.3443)
Valve Head Diameter (Intake), mm (in) .............. 35.63-35.37 (1.4083-1.3980)
Valve Head Diameter (Exhaust), mm (in) .............. 31.63-31.37 (1.2502-1.2399)
Valve Stem Diameter (Intake), mm (in) .............. 6.982-7.000 (0.2749-0.2756)
Valve Stem Diameter (Exhaust), mm (in) .............. 6.970-6.988 (0.2744-0.2751)
| Piston and Piston Rings |
Piston Outside Diameter (Std), mm (in) .............. 86.941-86.959 (3.4229-3.4236)
Piston Outside Diameter (Wear Limit), mm (in) .............. 86.814 (3.4179)
Piston to Cylinder Bore Clearance, mm (in) .............. 0.041-0.044 (0.0016-0.0017)
Piston to Piston Pin Clearance, mm (in) .............. 0.006-0.017 (0.0002-0.0007)
Piston Pin Bore Inside Diameter, mm (in) .............. 19.006-19.012 (0.7483-0.7485)
Piston Pin Outside Diameter, mm (in) .............. 18.995-19.000 (0.7478-0.7480)
Top Ring Groove Side Clearance, mm (in) .............. 0.034-0.100 (0.0013-0.0039)
Second Ring Groove Side Clearance, mm (in) .............. 0.040-0.072 (0.0016-0.0028)
Oil Ring Groove Side Clearance, mm (in) .............. 0.036-0.186 (0.0014-0.0073)
Top Ring End Gap, mm (in) .............. 0.250-0.500 (0.010-0.020)
Second Ring End Gap, mm (in) .............. 0.250-0.500 (0.010-0.020)
Oil Ring End Gap, mm (in) .............. 0.250-0.500 (0.010-0.020)
________________________________________________________________________________________
________________________________________________________________________________________
| Engines Technical Specifications |