________________________________________________________________________________________
| Home / Industrial Engines / Kubota Engines / Kubota D902 |
Kubota D902 Troubleshooting
| Engine Model: Kubota D902 |
| Engine Type: 4-cycle 3-cylinder liquid-cooled diesel engine |
| Total Displacement: 54.8 cu.in (0.9 L) |
| Rated Engine Power: 24.8 Hp (18.5 kW) at 3800 rpm |
| Aspiration Type: Naturally aspirated |
____________________________________________________________________________________
| Engine starts up hard or will not start |
Clogged fuel filter - Change filter element.
Air in the fuel pipes - Bleed the fuel pipes.
Dirty or faulty injection nozzles - Change fuel injection nozzles.
Fuel injection pump is not working correctly - Replacement or repair required.
| Diesel starts but immediately stops |
Dirty fuel filter - Filter maintenance required.
Fuel injection pump is defective - Repair or install new pump.
Plugged air cleaner - Clean or replace element.
| Engine stalls while running |
Fuel injection pump timing is not adjusted - Adjust the pump as required.
Clogged fuel filter - Change the filter element.
Low coolant temperature - Warm up the engine.
| Engine stalls at idle |
Incorrectly set low idle speed - Correct low idle adjustment.
Valve out of adjustment - Check and adjust.
Fuel injection pump malfunction - Replace injection pump or repair it.
| Reduced engine power |
Faulty or dirty injection nozzles - Replace injection nozzles.
Restricted fuel hoses or lines - Fuel lines and hoses need to be cleaned.
Air filter plugged - Carry out maintenance on air filter.
Cylinder head gasket defective - Change cylinder head gasket.
| Engine overheats |
Dirty radiator core or faulty radiator cap - Clean radiator or change cap.
Lack of engine coolant - Fill radiator to proper level and check components for faults.
Fan belt slipping or worn - Belt change is required.
Insufficient engine oil - Fill up the engine oil.
| Oil pressure is insufficient |
Engine oil level low - Fill the crankcase with oil.
Oil pump is damaged - Inspect and change as required.
Oil filter element clogged - Clean or change engine oil filter.
| Engine consuming too much oil |
Oil leakage: Damaged gaskets or seals - New components need to be installed.
Oil viscosity is incorrect - Fill up with the correct oil viscosity.
Stuck or defective piston rings - Piston rings replacement required.
Damaged valve guides or valve stems - Need to replace the valves.
Damaged cylinder liners or pistons - Inspect liners and pistons, fit new parts as necessary.
| Engine knocking sound or abnormal noise |
Low coolant temperature - Warm up engine as required.
Engine oil level low - Check and refill engine oil.
Improper fuel injection timing - Adjust the pump as required.
Piston wear or scoring - Replace the pistons.
Connecting rod is worn or not aligned - Alignment procedure or replacement is required.
| Starter motor turns slow |
Battery power is low - Battery needs to be recharged.
Battery will not hold charge - Service or replace the battery.
Disconnected cables or faulty battery terminals - Connect wires properly or change terminals.
| Starter motor won't turn |
Battery is drained or worn - Battery needs to be recharged or replaced.
Battery wiring is disconnected or improperly connected - Inspect wiring and connect as required.
Battery power is low - Battery is drained, charge it.
Starter motor failing - Starter needs to be changed.
________________________________________________________________________________________
________________________________________________________________________________________
| Engines Technical Specifications |