________________________________________________________________________________________
| Home / Car Engines / BMW Engines / BMW M54B25 |
BMW M54B25 Engine Specifications
The BMW M54B25 is a 2.5 liters (2,494 cc, 152.2 cubic inches) straight-six, four-stroke cycle naturally aspirated gasoline engine from BMW M54-family. The engine was manufactured oNmunich Plant (Munich, Germany) from 2000 to 2006. The BMW M54B25 engine features a cast-aluminum alloy cylinder block with cast-iron cylinder liners. The aluminum cylinder head uses chain-driven double overhead camshafts (DOHC) and four valves per cylinder (24 valves in total). It is equipped with a Siemens MS 43 engine management system, dual VANOS (Variable Valve Timing System from BMW) for both inlet and exhaust camshafts, fully electronic throttle without mechanical backup, dual length intake manifold (called “DISA” by BMW), a distributorless ignition system with individual ignition coils for each cylinder and an electronically controlled thermostat. It has an 84.0 mm (3.31 in) cylinder bore and 75.0 mm (2.95 in) piston stroke. Compression ratio rating is 10.5:1. The M54B25 engine produced 192 PS (141 kW; 189 HP) at 6,000 rpm of maximum horsepower and 245 Nm (25 kgm, 180.6 ft-lb) at 3,500 rpm of peak torque.
Engine code identification:
M54 - Engine Family
B - Gasoline
25 - 2.5 Liter Displacement
| GENERAL TECHNICAL DATA |
Engine model ..................... M54B25
Cylinder layout ..................... Four stroke, Inline-6 (Straight-6)
Fuel type ..................... Gasoline
Year of production ..................... 2000-2006
Total displacement ..................... 2.5 L, 2,494 cc (152.2 cubic inches)
Fuel system ..................... Fuel injection system
Power adder ..................... None
Maximum power ..................... 192 PS (141 kW; 189 HP) at 6,000 rpm
Maximum torque ..................... 245 Nm (25 kgm, 180.6 ft-lb) at
3,500 rpm
Firing order ..................... 1-5-3-6-2-4
Dimensions (L x H x W) ..................... -
Weight ..................... 130 kg (286.6 lbs)
| CYLINDER BLOCK |
The M54B25 engine used cast aluminum alloy cylinder block with cast-iron
cylinder liners, bore is 84.0 mm (3.31 in) and the piston stroke is 75.0
mm (2.95 in). The compression ratio rating is 10.5:1. The cylinders are
exposed on all sides to circulating coolant. The cast-iron
counterweighted crankshaft rotates in replaceable split-shell main
bearings. This engine used seveNmain bearings.
The forged steel connecting rods use replaceable split-shell bearings at
the crankshaft end and solid bushings at the piston pin end. The pistons
are of the three-ring type with two upper compression rings and a lower
one-piece oil scraper ring. Full-floating piston pins are retained with
circlips.
Cylinder block alloy ..................... Aluminum alloy
Compression ratio ..................... 10.5:1
Cylinder bore ..................... 84.0 mm (3.31 in)
Piston stroke ..................... 75.0 mm (2.95 in)
Number of piston rings (compression / oil) ..................... 2 / 1
Number of main bearings ..................... 7
Cylinder inner diameter (standard) ..................... 84.000-84.010
mm (3.3071-3.3075 in)
Piston skirt diameter (standard) ..................... 83.995 mm (3.3069
in)
Piston pin outer diameter ..................... 22.000 mm (0.8661 in)
Piston ring side clearance ..................... Top
..................... 0.020-0.060 mm (0.0008-0.0024 in)
Second ..................... 0.020-0.060 mm (0.0008-0.0024 in)
Oil ..................... 0.015-0.060 mm (0.0006-0.0024 in)
Piston ring end gap ..................... Top .....................
0.200-0.400 mm (0.0079-0.0157 in)
Second ..................... 0.200-0.400 mm (0.0079-0.0157 in)
Oil ..................... 0.200-0.450 mm (0.0079-0.0177 in)
Crankshaft journal diameter ..................... 60.000 mm (2.3622 in)
Crankpin diameter ..................... 45.000 mm (1.7717 in)
| CYLINDER HEAD |
The cylinder head is made of an aluminum alloy with good cooling
efficiency. The M54B25 engine uses chain-driven double overhead
camshafts and four valves per cylinder. Standart head height is 140.0 mm
(5.5118 in). The cylinder head employs a crossflow design for greater
power and efficiency. Intake air enters the combustion chamber from one
side while exhaust gasses exit from the other. This engine is equipped
with dual VANOS (Variable Camshaft Timing) system. VANOS is fully
variable and operates independently on both intake and exhaust sides.
Intake valves are 33.0 mm (1.2992 in) in diameter and exhaust valves are
30.5 mm (1.2008 in). They have a duration of 228° for inlet and 244° for
exhaust valves, valve lift is 9.0 mm (0.3543 in) for both intake and
exhaust valves. Valve clearance is set by self-adjusting (zero-lash)
hydraulic lifters for reduced valve noise and the elimination of routine
valve adjustment.
Cylinder head alloy ..................... Aluminum
Valve Arrangement ..................... DOHC, chain driven
Valves ..................... 24 (4 valves per cylinder)
Intake/Exhaust duration ..................... 228°/244°
Valve head diameter ..................... INTAKE .....................
33.0 mm (1.2992 in)
EXHAUST ..................... 30.5 mm (1.2008 in)
Valve steam diameter ..................... INTAKE .....................
6.0 mm (0.2362 in)
EXHAUST ..................... 6.0 mm (0.2362 in)
Head tightening procedure and torque specs:
Step 1: 40.0 Nm; 4.1 kgm; 29.5 ft-lb
Step 2: Turn all bolts 90°
Step 3: Turn all bolts another 90°
| MAINTENANCE DATA |
Compression pressure
Minimum ..................... 10.0 kg/cm2 (9.9 bar, 145 psi) / 350 rpm
Compression differential limit between cylinders .....................
1.0 kg/cm2 (1.0 bar, 15 psi) / 350 rpm
Oil system
Recommended engine oil ..................... SAE 5W-30
Oil type ..................... BMW LL-98 or LL-01
Engine oil capacity (Refill capacity) ..................... ~ 6.5 L
(6.87 US. qt, 5.72 Imp. qt.)
Oil change interval, km (miles) ..................... 5,000-10,000
(3,000-6,000)
Ignition system
Spark plug ..................... Bosch: FGR7DQP, NGK: BKR6EQUP
Spark plug torque ..................... 25 Nm (2.5 kgm, 18.4 ft-lb)
| VEHICLE APPLICATIONS |
BMW Z3 2.5i (E36/7 ) ..................... 2000-2002
BMW 325i, 325xi, 325Ci (E46) ..................... 2000-2006
BMW 325ti (E46/5) ..................... 2000-2004
BMW 525i (E39) ..................... 2000-2004
BMW 525i, 525xi (E60/E61) ..................... 2003-2005
BMW X3 2.5i (E83) ..................... 2003-2006
BMW Z4 2.5i (E85) ..................... 2002-2005
________________________________________________________________________________________
________________________________________________________________________________________
| Engines Technical Specifications |