________________________________________________________________________________________
| Home / Small Engines / Kawasaki Engines / Kawasaki FS600V |
Kawasaki FS600V Specifications
The Kawasaki FS600V is a 0.6 l (603 cc, 36.8 cubic inches) V-twin 90 deg air-cooled 4-stroke internal combustion small gasoline engine with vertical shaft, manufactured by Kawasaki Heavy Industries LTd., for general-purpose applications, such as zero-turn riders, lawn and garden tractors and wide-area walk-behind mowers. The FS600V has 90 degrees V-twin design with vertical PTO shaft, overhead V-valves, cast iron cylinder liners, and spherical combustion chamber. The engine is equipped with the electronic spark ignition system, internally vented carburetor with fuel shut-off solenoid, rotating grass chopper screen, integrated clean out ports. The engine is equipped with a high-performance lubrication system and dual-element air filter. The engine has an automatic compression release (ACR) system with bendix type starter. 13A or 20A charge coils, muffler, oil pressure switches, various oil drains are available as an option. It has a 73.0 mm (2.87 in) cylinder bore and 72.0 mm (2.83 in) piston stroke. Compression ratio rating is 8.1:1. The engine has a maximum power of 17.3 PS (12.7 kW; 17.0 HP) at 3,600 rpm or 18.8 PS (13.8 kW; 18.5 HP) at 3,600 rpm of maximum horsepower and 40.4 Nm (4.1 kgm; 29.8 ft-lb) at 2,200 rpm or 44.1 Nm (4.5 kgm; 32.5 ft-lb) at 2,000 rpm of max torque.
____________________________________________________________________________________
- Kawasaki FS600V Engine Specifications
- Kawasaki FS600V Engine Maintenance
- Kawasaki FS600V Engine Troubleshooting
| General Technical Data |
Engine Model ............... Kawasaki FS600V
Engine Type ............... 4-cycle vertical shaft V-twin OHV air-cooled gasoline engine
Number of Cylinders ............... 2
Cylinder Liners ............... Cast iron
Displacement, cc (cu.in) ............... 603 (36.8)
Cylinder Bore, mm (in) ............... 73.0 (2.87)
Piston Stroke, mm (in) ............... 72.0 (2.84)
Rated Engine Power, hp (kW) ............... 17.0 (12.7)
Rated Engine Speed, rpm ............... 3600
Maximum Torque, Nm (ft-lb) ............... 40.4 (29.8)
Torque Speed, rpm ............... 2200
Compression Ratio ............... 8.1:1
Lubrication System ............... Pressure feed by positive displacement pump
Cooling System ............... Forced-air
Oil Filter Type ............... Cartridge, full flow
Ignition System ............... Electronic
Air Cleaner Type ............... Dual stage element
Starting System ............... Electric or recoil starter
Electrical System Rating, Volts ............... 12
| Fuel System |
Fuel System ............... Carburetor
Carburetor Model ............... Walbro LMF
Carburetor Type ............... Float with fixed main jet, single barrel
Fuel Pump Type ............... Diaphragm pulse pump
Governor Type ............... Flyweight all speed governor
Fuel Type ............... Gasoline (86 or higher)
| Dimensions and Weight |
Overall Length, mm (in) ............... 485 (19.1)
Overall Width, mm (in) ............... 433 (17.1)
Overall Height, mm (in) ............... 376 (14.8)
Net weight, kg (lbs) ............... 36.7 (81.0)
| Cylinder Block |
Cylinder Inside Diameter (Max), mm (in) ............... 73.10 (2.878)
Cylinder Bore Out Round, mm (in) ............... 0.056 (0.0022)
Connecting Rod Bend, mm (in) ............... 0.15/100 (0.006/3.94)
Connecting Rod Big End Width, mm (in) ............... 19.00 (0.748)
Connecting Rod Big End Inside Diameter, mm (in) ............... 38.04 (1.50)
Connecting Rod Small End Inside Diameter, mm (in) ............... 16.05 (0.632)
Crankpin Width, mm (in) ............... 40.0 (1.57)
Crankpin Outside Diameter, mm (in) ............... 37.94 (1.49)
Crankshaft Runout, mm (in) ............... 0.05 (0.002)
Crankshaft Journal Diameter (PTO), mm (in) ............... 37.90 (1.492)
Crankshaft Journal Diameter (Flywheel), mm (in) ............... 34.90 (1.374)
Crankshaft Bearing Inside Diameter, mm (in) ............... 38.10 (1.500)
| Cylinder Head and Valves |
Cylinder Head Warp, mm (in) ............... 0.05 (0.002)
Valve Clearance (Intake, Exhaust), mm (in) ............... 0.10-0.15 (0.0040-0.0059)
Valve Seat Angle (Intake, Exhaust), deg ............... 45
Valve Seat Width (Intake), mm (in) ............... 0.8-1.4 (0.03-0.06)
Valve Seat Width (Exhaust), mm (in) ............... 0.8-1.4 (0.031-0.055)
Valve Guide Inside Diameter (Intake, Exhaust), mm (in) ............... 6.00-6.012 (0.2362-0.2367)
Valve Head Thickness (Intake, Exhaust), mm (in) ............... 0.35 (0.014)
Valve Stem Runout (Intake, Exhaust), mm (in) ............... 0.05 (0.002)
Valve Stem Diameter (Intake), mm (in) ............... 5.95 (0.234)
Valve Stem Diameter (Exhaust), mm (in) ............... 5.93 (0.233)
Valve Guide Inside Diameter (Intake, Exhaust), mm (in) ............... 6.08 (0.239)
Valve Spring Free Length (Intake, Exhaust), mm (in) ............... 31.0 (1.22)
Rocker Arm Push Rod Runout (Intake, Exhaust), mm (in) ............... 0.5 (0.02)
Cam Lobe Height, mm (in) ............... 29.621 (1.166)
| Piston and Piston Rings |
Piston Outside Diameter, mm (in) ............... 72.79 (2.866)
Piston Pin Outside Diameter, mm (in) ............... 15.96 (0.628)
Piston Pin Hole Inside Diameter, mm (in) ............... 16.08 (0.633)
Top Ring Groove Clearance, mm (in) ............... 0.12 (0.0047)
Second Ring Groove Clearance, mm (in) ............... 0.12 (0.0047)
Piston Ring Thickness, mm (in) ............... 1.1 (0.043)
Top Ring End Gap, mm (in) ............... 0.7 (0.028)
Second Ring End Gap, mm (in) ............... 0.9 (0.035)
Oil Ring End Gap, mm (in) ............... 1.05 (0.041)
________________________________________________________________________________________
________________________________________________________________________________________
| Engines Technical Specifications |