________________________________________________________________________________________
| Home / Car Engines / Toyota Engines / Toyota 1CD-FTV |
Toyota 1CD-FTV Engine Specifications
The Toyota 1CD-FTV is a 2.0 L (1,995 cc, 121.7 cubic inches)
four-cylinders, 4-stroke water-cooled turbocharged internal combustion
diesel engine from the Toyota CD-family, manufactured by the Toyota
Motor Corporation from 1997 to 2007.
The engine has a cast-iron block with 82.2 mm (3.24 in)
cylinder bores and a 94.0 mm (3.7 in) piston stroke for a capacity of
1,995 cc (121.7 cubic inches). Compression ratio rating is 18.6:1. The
motor used an aluminum cylinder head with a dual overhead camshaft
(DOHC) and 16 valves (4 per cylinder). The is equipped with
“Direct Injection 4-Stroke Common Rail Diesel Engine” (D-4D) and
turbocharger.
The Toyota 1CD-FTV produced from 89 PS (66 kW; 88 HP) at 4,000 rpm to
118 PS (87 kW; 116 HP) at 4,000 rpm of maximum power and from 215 Nm
(21.9 kgm, 158.5 ft-lb) at 2,400 rpm to 280 Nm (28.6 kgm, 206.4 ft-lb)
at 3,600 rpm of peak torque.
Engine code identification:
1 - 1st generation engine
CD - Engine family
F - Economy narrow-angle DOHC
T - Turbocharged
V - D-4D Common rail direct injection system (diesel)
| GENERAL TECHNICAL DATA |
Engine model ............... 1CD-FTV
Cylinder layout ............... Straight-4, vertical
Fuel type ............... Diesel
Production ............... 1999-2007
Total displacement ............... 2.0 L, 1,995 cm2, (121.7 cubic
inches)
Fuel system ............... Direct Injection 4-Stroke Common Rail Diesel
Engine
Power adder ............... Turbocharger
Rated power ............... From 89 PS (66 kW; 88 HP) at 4,000 rpm
to 118 PS (87 kW; 116 HP) at 4,000 rpm
Torque output ............... From 215 Nm (21.9 kgm, 158.5 ft-lb) at
2,400 rpm
to 280 Nm (28.6 kgm, 206.4 ft-lb) at 3,600 rpm
Firing order ............... 1-3-4-2
Dimensions (L x H x W) ............... No data available
Weight ...............
| CYLINDER BLOCK |
The 1CD-FTV engine used a deep-skirt cast iron cylinder block with 82.2
mm (3.24 in) of the cylinder bore and a 94.0 mm (3.7 in) of the piston
stroke. Compression ratio rating is 18.6:1. The engine has
aluminum alloy pistons. Each piston is fitted with two compression rings
and a single oil ring.
Cylinder block alloy ............... Cast-iron
Compression ratio ............... 18.6:1
Cylinder bore ............... 82.2 mm (3.24 in)
Piston stroke ............... 94.0 mm (3.7 in)
Number of piston rings (compression / oil) ............... 2 / 1
Number of main bearings ............... 5
Cylinder bore inner diameter ............... 82.200-82.400 mm
(3.2362-3.2441 in)
Piston skirt diameter ............... 82.118-82.132 mm (3.233-3.2335 in)
Piston ring side clearance ............... Top ...............
0.110-0.150 mm (0.0043-0.0059 in)
Second ............... 0.075-0.115 mm (0.003-0.0045 in)
Oil ............... 0.030-0.070 mm (0.0012-0.0028 in)
Piston ring end gap ............... First ............... 0.270-0.390 mm
(0.0106-0.0154 in)
Second ............... 0.390-0.540 mm (0.0154-0.0213 in)
Oil ............... 0.200-0.400 mm (0.0079-0.0157 in)
Piston pin outer diameter ............... 31.000-31.012 mm
(1.2205-1.2209 in)
Crankshaft main journal diameter ............... 56.992-57.010 mm
(2.2438-2.2445 in)
Crankpin diameter ............... 50.482-50.500 mm (1.9875-1.9882 in)
Crankshaft center distance ............... 47.0 mm (1.85 in)
Main bearing cap tightening procedure and torque specs:
Step 1: 115 Nm; 11.7 kgm; 85 ft-lb
After securing bearing cap bolts, make sure crankshaft turns smoothly by
hand.
Connecting rod bearing nut
Step 1: 30 Nm; 3.06 kgm; 22 ft-lb
Step 2: Turn all bolts 90deg
| CYLINDER HEAD |
The 1CD-FTV has an aluminum cylinder head, belt-driven double overhead
camshaft (DOHC) and 4 valves per cylinders (16 valves in total).
Cylinder head alloy ............... Aluminum
Valve Arrangement ............... DOHC
Valves ............... 16 (4 valves per cylinder)
Intake valves diameter ............... 28.0 mm (1.1024 in)
Exhaust valves diameter ............... 24.0 mm (0.9449 in)
Intake valves length ............... 102.53 mm (4.0366 in)
Exhaust valves length ............... 101.97 mm (4.0146 in)
Intake valve stem diameter ............... 5.970-5.985 mm (0.235-0.2356
in)
Exhaust valves stem diameter ............... 5.960-5.975 mm
(0.2346-0.2352 in)
Camshaft journal diameter ............... 26.969-26.985 mm
(1.0618-1.0624 in)
Intake cam lobe height ............... 46.570-46.670 mm (1.8335-1.8374
in)
Exhaust cam lobe height ............... 47.520-47.620 mm (1.8709-1.8748
in)
Head tightening procedure and torque specs:
Step 1: 45 Nm; 4.5 kgm; 33 ft-lb
Step 2: Turn all bolts 90deg
Step 3: Turn all bolts 90deg
Step 4: Turn all bolts 90deg
Camshaft bearing cap
20 Nm; 2.04 kgm; 15 ft-lb
| MAINTENANCE DATA |
Valve clearance (Cold)
Intake valve ............... 0.20-0.30 mm (0.0079-0.0118 in)
Exhaust valve ............... 0.35-0.45 mm (0.0138-0.0177 in)
Oil system
Oil type ............... CF, CE, CD
Recommended engine oil ............... SAE 10W-30, 5W-30
Engine oil capacity ............... With oil filter change: 6.5 L (6.3
US qt, 5.3 Imp. qt)
Without oil filter change: 5.9 L (5.3 US qt, 4.4 Imp. qt)
| VEHICLE APPLICATIONS |
Model ............... Years Produced
Toyota Avensis (T220, T250) ............... 1999-2006
Toyota Avensis Verso (XM20) ............... 2001-2006
Toyota Corolla (E110, E120) ............... 2000-2007
Toyota Corolla Verso (E121) ............... 2001-2006
Toyota RAV4 (XA20) ............... 2000-2006
Toyota Previa (XR30) ............... 2001-2006
________________________________________________________________________________________
________________________________________________________________________________________
| Engines Technical Specifications |