________________________________________________________________________________________
Husqvarna LT154 Lawn Tractor
The
Husqvarna LT 154 lawn tractor was manufactured from 2011 to 2013. The Husqvarna
LT154 is powered by 29.1 cu.in (477 cc) Kohler Courage SV470 4-cycle
single-cylinder vertical shaft air-cooled gasoline engine with a rated power of
15 hp (11.2 kW), or 30.5 cu.in (500 cc) Briggs and Stratton 31R577 Intek 4-cycle
single cylinder OHV vertical shaft air-cooled gasoline engine with a rated power
of 13.5 hp (10 kW).
The Husqvarna LT154 is fitted with a Peerless 206-565 machanical
transmission with 6 forward and 1 reverse gears. The maximum travel
speed (forward/reverse): 4.4 mph (7 km/h) and 1.5 mph (2.3 km/h). The
Husqvarna LT 154 was equipped with a manual steering system, pneumatic
wheels, 15x6.00-6 front tires, and 18x9.50-8 rear tires. The wheelbase
is 46.8 in (1190 mm).
The lawn tractor is compatible with a 38" mid-mount 2-blade side
discharge mower deck with cutting height of 1.5-4.0 in (38-102 mm), 6
cut positions, manual blade engagement, and mechanical lift system.
Engine Model |
Kohler Courage SV470 |
Engine Type |
Gasoline, 4-cycle single-cylinder vertical shaft air-cooled |
Number of Cylinders |
1 |
Displacement, cu.in (cc) |
29.1 (477) |
Engine Bore, in (mm) |
3.30 (84.0) |
Engine Stroke, in (mm) |
3.38 (86.0) |
Rated Engine Power, hp (kW) |
15.0 (11.2) |
Rated Engine Speed, rpm |
3600 |
Low Idle Speed, rpm |
1450-1550 |
Maximum Torque, Nm (ft-lbs) |
34.3 (25.0) |
Torque Speed, rpm |
2600 |
Compression |
8.5:1 |
Fuel System Type |
Carburetor |
Carburetor Type |
Fixed main jet |
Fuel Pump |
Pulse type |
Governor |
Mechanical |
Lubrication |
Full pressure |
Oil filter |
Full-flow type |
Air Cleaner |
Replaceable, paper element |
Spark Plug Type |
Champion RC12YC or QC12YC |
Spark Plug Gap, in (mm) |
0.030 (0.76) |
Module Air Gap, in (mm) |
0.008-0.012 (0.203-0.305) |
Intake Valve Clearance, in (mm) |
0.0015-0.0030 (0.038-0.076) |
Exhaust Valve Clearance, in (mm) |
0.0020-0.0035 (0.050-0.088) |
Fuel Tank Capacity, gal (L) |
1.5 (5.7) |
Oil Capacity, qts (L) |
1.5 (1.6) |
Engine Model |
Briggs and Stratton 31R577 Intek |
Engine Type |
4-cycle single cylinder OHV vertical shaft air-cooled gasoline engine |
Number of Cylinders |
1 |
Displacement, cu.in (cc) |
30.5 (500) |
Cylinder Bore, in (mm) |
3.56 (91.0) |
Piston Stroke, in (mm) |
3.06 (78.0) |
Rated Engine Power, hp (kW) |
13.5 (10.0) |
Rated Engine Speed, rpm |
3600 |
Idle Speed, rpm |
1750 |
Cylinder Bore Type |
Cast iron sleeve |
Fuel System Type |
Carburetor |
Carburetor Type |
Float |
Fuel Pump |
Integral type |
Governor Type |
Mechanical |
Lubrication System |
Oil pump with filter |
Air Cleaner |
Dual element |
Cooling System |
Forced air |
Ignition System |
Electronic |
Spark Plug Type |
Champion RC12YC |
Spark Plug Gap, in (mm) |
0.03 (0.76) |
Armature Air Gap, in (mm) |
0.010-0.014 (0.25-0.36) |
Valve Clearance (Intake), in (mm) |
0.003-0.005 (0.08-0.13) |
Valve Clearance (Exhaust), in (mm) |
0.005-0.007 (0.13-0.18) |
Fuel Tank Capacity, gal (L) |
1.5 (5.7) |
Oil Capacity, qts (L) |
1.51 (1.42) |
Electrical System Rating, Volts |
12 |
Charging System |
Alternator |
Starter Type |
Electric |
Number of Batteries |
1 |
Electric Ground |
Negative |
PTO Operational Type |
Independent |
PTO Clutch |
Mechanical |
PTO Speed, rpm |
3000 |
Transmission Model |
Peerless 206-565 |
Transmission Type |
Gear |
Gearbox Type |
6F/1R |
Number of Forward Gears |
6 |
Number of Reverse Gears |
1 |
Maximum Forward Speed, mph (kph) |
4.4 (7.0) |
Maximum Reverse Speed, mph (kph) |
1.5 (2.3) |
Drive Wheels |
2WD 4x2 |
Steering Configuration |
Front steer |
Steering System |
Manual |
Tire Type |
Pneumatic wheels |
Front Tire Size |
15x6.00-6 |
Rear Tire Size |
18x9.50-8 |
Wheelbase, in (mm) |
46.8 (1190) |
Length, in (mm) |
67.7 (1720) |
Height, in (mm) |
41.8 (1060) |
Overall Width (Max), in (mm) |
51.3 (1350) |
Turning Radius, in (mm) |
16 (405) |
Weight, lb (kg) |
405 (184) |
Mower Deck Type |
Mid-mount |
Mower Deck Construction |
Stamped |
Mower Deck Material |
Steel |
Number of Blades |
2 |
Blade Engagement |
Manual |
Cutting Method |
Side discharge |
Cutting Width, in (mm) |
38 (970) |
Cutting Height, in (mm) |
1.5-4.0 (38-102) |
Cut Positions |
6 |
Deck Drive |
Belt |
Lift System |
Mechanical, hand operated |
________________________________________________________________________________________
________________________________________________________________________________________
Lawn and Garden Tractors Technical Specs |