________________________________________________________________________________________
Husqvarna YTH22V42 Lawn Tractor
The
Husqvarna YTH22V42 lawn tractor was manufactured from 2012 to 2013. The
Husqvarna YTH22V42 powertrain system components: Briggs and Stratton 407777
4-cycle vertical-shaft V-twin cylinder air-cooled gasoline engine and Tuff Torq
K46 belt-driven hydrostatic transmission with foot-controlled variable speed
drive.
A 40.1 cubic inches (656 cc) engine has a cylinder bore of 2.97" (75
mm), piston stroke of 2.89" (73 mm), and rated power of 22 hp (17 kW).
The maximum travel speed (forward/reverse): 5.2 mph (8.4 kph) and 2.9
mph (4.7 kph). The Husqvarna YTH22V42 is fitted with 15x6.00-6 front tires
and 20x8.00-8 rear tires.
The wheel base is 48 inches (1220 mm). The tractor is equipped with a
42" mid-mount 2-blade side discharge mower deck with cutting height of
1.5-4.0" (37-100 mm), 6 cut positions, and manual lift system.
| Engine Model |
Briggs and Stratton 407777 |
| Engine Type |
4-cycle vertical-shaft V-twin air-cooled gasoline |
| Number of Cylinders |
2 |
| Displacement, cu.in (cc) |
40.1 (656) |
| Engine Bore, in (mm) |
2.97 (75.0) |
| Engine Stroke, in (mm) |
2.89 (73.0) |
| Maximum Engine Power, hp (kW) |
22.0 (17.0) |
| Rated Engine Speed, rpm |
3600 |
| Idle Speed, rpm |
1400-1600 |
| Maximum Torque, Nm (ft-lbs) |
49.2 (36.5) |
| Torque Speed, rpm |
2400 |
| Fuel System |
Carburetor |
| Lubrication System |
Full pressure with oil filter |
| Spark Plug |
Champion QC12YC |
| Spark Plug Gap, in (mm) |
0.030 (0.76) |
| Armature Air Gap, in (mm) |
0.008-0.012 (0.20-0.30) |
| Intake Valve Clearance, in (mm) |
0.004-0.006 (0.10-0.15) |
| Exhaust Valve Clearance, in (mm) |
0.004-0.006 (0.10-0.15) |
| Fuel Tank Capacity, gal (L) |
2.5 (9.5) |
| Oil Capacity, qts (L) |
2.0 (1.9) |
| Electrical System Rating, Volts |
12 |
| Charging System Rating, Amps |
8A |
| Starter Type |
Electric |
| Number of Batteries |
1 |
| Battery Rating |
12V, 230 CCA |
| Battery, AH |
28 |
| Electric Ground |
Negative |
| PTO Operational Type |
Independent |
| PTO Clutch |
Manual |
| PTO Speed, rpm |
3600 |
| Transmission Model |
Tuff Torq K46 |
| Transmission Type |
Belt-driven hydrostatic |
| Number of Forward Gears |
Infinite |
| Number of Reverse Gears |
Infinite |
| Drive Train |
Transaxle with foot-controlled variable speed drive |
| Reduction Ratio |
21.53:1 |
| Axle Shaft Size, in (mm) |
0.75 (19.1) |
| Transaxle Capacity, qts (L) |
2.8 (2.6) |
| Maximum Forward Speed, mph (kph) |
5.2 (8.4) |
| Maximum Reverse Speed, mph (kph) |
2.9 (4.7) |
| Drive Wheels |
2WD 4x2 |
| Steering Configuration |
Front steer |
| Steering System |
Manual |
| Brakes Type |
Disc |
| Front Tire Size |
15x6.00-6 |
| Rear Tire Size |
20x8.00-8 |
| Wheelbase, in (mm) |
48 (1220) |
| Length, in (mm) |
69.3 (1760) |
| Height, in (mm) |
41.5 (1050) |
| Overall Width, in (mm) |
43.5 (1100) |
| Ground Clearance, in (mm) |
7 (175) |
| Weight, lb (kg) |
428 (194) |
| Mower Deck Type |
Mid-mount |
| Number of Blades |
2 |
| Cutting Methods |
Side discharge |
| Cutting Deck Type |
Stamped, reinforced |
| Cutting Width, in (mm) |
42 (1070) |
| Overall Width, in (mm) |
50 (1270) |
| Cutting Height, in (mm) |
1.5-4.0 (37-100) |
| Cut positions |
6 |
| Anti-Scalp Wheels |
2 |
| Lift System |
Mechanical |
________________________________________________________________________________________
________________________________________________________________________________________
| Lawn and Garden Tractors Technical Specs |
