________________________________________________________________________________________
Case L720 Front End Loader
The
Case L720 loader is designed to fit Case IH JX1075C, JX1085C, and JX1095C
tractors. The loader hydraulic system includes double-acting hydraulic lift and
bucket cylinders. The Case IH L720 loader’s maximum lift height is 124 in (3150
mm) at pin, and bucket dump clearance is 86 in (2180 mm).
The lift capacity is 2100 lb at maximum height (31.5" ahead of pin), and
bucket's breakout force is 2650 lb (31.5" ahead of pin). The boom
raising time is 3.3 sec. from ground line to full height, and bucket
dump time is 3.5 sec.
The Case IH L720 loader is compatible with the following buckets: a
63-in standard material bucket with a weight of 395 lb (179 kg) and
heaped capacity of 18.6 cubic feet (0.53 cu.m), or 73-in standard
material with a nominal heaped capacity of 21.5 cubic feet (0.62 cu.m)
and weight of 465 lb (210 kg).
| Tractor Models |
JX1075C, JX1085C, JX1095C |
| Front Tires |
11.2x24 |
| Rear Tires |
16.9x30 |
| Hydraulic System Flow, gpm (lpm) |
16.9 (64.0) |
| Loader Model |
Case IH L720 NSL |
| Leveling System |
Non Self Leveling |
| Weight, lb (kg) |
960 (435) |
| Width, in (mm) |
63 (1600) |
| Struck Capacity, cu.ft (m3) |
14.7 (0.42) |
| Heaped Capacity, cu.ft (m3) |
18.6 (0.53) |
| Weight, lb (kg) |
395 (179) |
| Width, in (mm) |
73 (1830) |
| Struck Capacity, cu.ft (m3) |
17.1 (0.49) |
| Heaped Capacity, cu.ft (m3) |
21.5 (0.62) |
| Weight, lb (kg) |
465 (210) |
| Maximum lift height to bucket pivot pin, in (mm) |
124 (3150) |
| Maximum lift height under level bucket, in (mm) |
112 (2840) |
| Clearance with bucket dumped, in (mm) |
86 (2180) |
| Reach at maximum lift height, in (mm) |
28 (710) |
| Maximum dump angle, degrees |
64 |
| Reach with bucket on ground level, in (mm) |
86 (2180) |
| Maximum rollback angle, degrees |
45 |
| Digging Depth, in (mm) |
7 (179) |
| Lift Capacity to max. height, 31.5" (800 mm) forward of bucket pivot pin, lbs (kg) |
2100 (953) |
| Lift Capacity to maximum height, at bucket pivot pin, lbs (kg) |
3300 (1497) |
| Breakout force, 31.5" (800 mm) forward of bucket pivot pin, lbs (kg) |
2650 (1202) |
| Raise time to full height, sec |
3,3 |
| Lower time, sec |
2,1 |
| Bucket dump time, sec |
3,5 |
| Bucket Rollback, sec |
2,4 |
________________________________________________________________________________________
________________________________________________________________________________________
| Front End Loaders Specifications |
