________________________________________________________________________________________
Case 580D Backhoe Loader
The
Case 580D backhoe loader was manufactured between 1980 and 1983. The components
of Case 580D powertrain system: Case G207D 4-cylinder liquid-cooled naturall
aspirated diesel engine, and 4x4 power shuttle transmission with a torque
converter.
A 207 cu.in (3.4 L) engine has a cylinder bore of 4" (102 mm), piston
stroke of 4.13" (105 mm), and rated power of 60 hp (44.7 kw). The
maximum forward speed - 21 mph (33.8 kph), a max reverse speed - 18.9
mph (30.4 kph). The open center hydraulic system includes a gear pump
with flow of 23 gpm (87.5 lpm). The hydraulic system pressure is 2000
psi (138 bar). The Case 580D is equipped with 7.50x16 or 8.00x16 front
tires, and 14.9x24 or 16.9x24 rear tires.
The loader’s maximum lift height is 130 inches (3290 mm) at pin, and
bucket dump clearance is 103.8 inches (2640 mm). The lift capacity is
5155 lbs (2340 kg) at max. height (pivot pin), and bucket's breakout
force is 7600 lbs (3445 kg). The estimated cycle times are 5.2 seconds
lifting to full height, and 1 second full bucket dumping. The general
purpose buckets have a width of 74 inches (1870 mm) or 82 inches (2075
mm).
The backhoe (extendahoe with extended stick) work ranges consist of a
bucket digging force of 10550 lbs (4795 kg), and dipperstick dig force
of 4082 lbs (1850 kg). The digging depth at maximum value is 219 inches
(5560 mm), and overall reach from swing pivot is 259 inches (6570 mm) at
ground level. The backhoe is compatible with 12" 18", 24", 30" and 36"
buckets.
| Engine Model |
J.I. Case G207D |
| Engine Type |
4-Stroke, 4-cylinder liquid-cooled diesel |
| Number of Cylinders |
4 |
| Displacement, cu in (L) |
207 (3.40) |
| Engine Bore, in (mm) |
4.00 (102.0) |
| Engine Stroke, in (mm) |
4.13 (105.0) |
| Aspiration |
Naturall aspirated |
| Rated Engine Power, hp (kW) |
60.0 (44.7) |
| Rated Engine Speed, rpm |
2100 |
| Maximum Torque, Nm (ft-lb) |
217 (160) |
| Torque Speed, rpm |
1400 |
| Compression Ratio |
17.0:1 |
| Firing Order |
1-3-4-2 |
| Fuel System |
Injection pump |
| Governor |
Mechanical flyweight |
| Lubricating System Type |
Positive pressure |
| Cooling System Type |
Pressurized |
| Air Cleaner |
Dry type |
| Fuel Tank Capacity, gal (L) |
22.0 (83.3) |
| Oil Capacity, qts (L) |
7.0 (6.6) |
| Coolant Capacity, qts (L) |
13.0 (12.3) |
| Electrical System Rating, Volts |
12 |
| Charging System |
Alternator |
| Alternator Rating, Amps |
42 |
| Transmission Type |
Power Shuttle with Torque Converter |
| Gearbox Type |
4F/4R, sliding spur gear |
| Number of Forward Gears |
4 |
| Number of Reverse Gears |
4 |
| Torque Converter Type |
Single stage |
| Torque Converter Ratio |
2.78:1 |
| Clutch Type |
Hydraulic |
| Transaxle Oil Capacity, qts (L) |
20.0 (18.9) |
| Shuttle Oil Capacity, qts (L) |
8.0 (7.6) |
| Maximum Forward Speed, mph (kph) |
21.0 (33.8) |
| Maximum Reverse Speed, mph (kph) |
18.9 (30.4) |
| Drive Wheels |
2WD 4x2 |
| Steering Configuration |
Front steer |
| Steering System |
Hydrostatic power |
| Brakes Type |
Hydraulic disc |
| Front Tire Size (Std) |
7.50x16 |
| Rear Tire Size (Std) |
14.9x24 |
| Front Tire Size (Opt) |
8.00x16 |
| Rear Tire Size (Opt) |
16.9x24 |
| Front Tread, in (mm) |
59-62 (1490-1570) |
| Rear Tread, in (mm) |
62 (1570) |
| Hydraulic System Type |
Open Center |
| Hydraulic Pump Type |
Gear |
| Implement Pump Flow, gpm (Lpm) |
23.0 (87.5) |
| Steering Pump Flow, gpm (Lpm) |
7.0 (26.5) |
| Hydraulic Pressure, Bar (psi) |
138 (2000) |
| Steering Pressure, Bar (psi) |
138 (2000) |
| Hydraulic Fluid Capacity, gal (L) |
12.5 (47.4) |
| Wheelbase, in (mm) |
82.4 (2090) |
| Length (with Loader and Backhoe), in (mm) |
271 (6880) |
| Height (ROPS), in (mm) |
103.4 (2620) |
| Height (Cab), in (mm) |
103.9 (2630) |
| Overall Width, in (mm) |
81.4 (2060) |
| Ground Clearance, in (mm) |
9.2 (232) |
| Turning Radius (with Brake), in (mm) |
127.5 (3225) |
| Turning Radius (without Brake), in (mm) |
145.1 (3670) |
| Weight (w/o Attachments), lb (kg) |
6300 (2865) |
| Weight (with Loader), lb (kg) |
8850 (4020) |
| Weight (with Loader and Backhoe), lb (kg) |
11880 (5400) |
| Maximum Lift Height (to pin), in (mm) |
130 (3290) |
| Clearance, Dumped Bucket, in (mm) |
103.8 (2640) |
| Dump Reach, in (mm) |
25.5 (640) |
| Dump Angle, deg |
45 |
| Rollback Angle, deg |
40 |
| Digging Depth, in (mm) |
3.3 (83) |
| Breakout Force, lb (kg) |
7600 (3445) |
| Lift Capacity to Full Height, lb (kg) |
5155 (2340) |
| Lift Cylinder Size, in (mm) |
3.0x31.5 (76x800) |
| Bucket Cylinder Size, in (mm) |
2.5x20 (64x508) |
| Bucket Width, in (mm) |
74 (1870) |
| Bucket Width, in (mm) |
82 (2075) |
| Raising Time to Full Height, second |
5.2 |
| Bucket Dumping Time, second |
1.0 |
| Lowering Time, second |
3.0 |
| Digging Depth (Standard), in (mm) |
170 (4310) |
| Digging Depth (Extendahoe, Retracted Stick), in (mm) |
172 (4360) |
| Digging Depth (Extendahoe, Extended Stick), in (mm) |
219 (5560) |
| Reach from Swing Pivot (Standard), in (mm) |
212 (5380) |
| Reach from Swing Pivot (Extendahoe, Retracted Stick), in (mm) |
213 (5410) |
| Reach from Swing Pivot (Extendahoe, Extended Stick), in (mm) |
259 (6570) |
| Loading Height (Standard), in (mm) |
134 (3400) |
| Loading Height (Extendahoe, Retracted Stick), in (mm) |
143 (3630) |
| Loading Height (Extendahoe, Extended Stick), in (mm) |
171 (4340) |
| Swing Arc, deg |
180 |
| Bucket Rotation, deg |
168 |
| Bucket Digging Force (Standard), lb (kg) |
10445 (4750) |
| Bucket Digging Force (Extendahoe, Retracted/Extended), lb (kg) |
10550 (4795) |
| Dipperstick Digging Force (Standard), lb (kg) |
6015 (2730) |
| Dipperstick Digging Force (Extendahoe, Retracted), lb (kg) |
5835 (2645) |
| Dipperstick Digging Force (Extendahoe, Extended), lb (kg) |
4082 (1850) |
| Bucket Width, in (mm) |
12 (305) |
| Bucket Width, in (mm) |
18 (455) |
| Bucket Width, in (mm) |
24 (605) |
| Bucket Width, in (mm) |
30 (760) |
| Bucket Width, in (mm) |
36 (910) |
| Boom Cylinder Size, in (mm) |
3.2x42.1 (83x1070) |
| Dipper Cylinder Size, in (mm) |
4.0x35.1 (102x888) |
| Bucket Cylinder Size, in (mm) |
3.5x30.6 (88x776) |
| Swing Cylinder Size, in (mm) |
4.0x11.2 (102x285) |
| Stabilizer Cylinder Size, in (mm) |
4.0x21.8 (102x553) |
| Dipper Extension Cylinder Size, in (mm) |
3.0x48.0 (76x1220) |
________________________________________________________________________________________
________________________________________________________________________________________
| Backhoe Loaders Technical Specifications |
