________________________________________________________________________________________

Home / Farm Tractors / Case IH Tractors / Case IH 3230

Case IH 3230 Tractor

The Case International 3230 is a 3200-series utility tractor. This model was manufactured from 1994 to 1997. The IH 3230 tractor is powered by Case D206 four-cylinder liquid-cooled diesel engine with operating power of 56.1 Hp (41.8 kw) and 220 Nm (163.2 lb-ft) of max torque at 1400 rpm.

The Case IH 3230 is fitted with two types of transmission. Type 1: 8x4 synchromesh transmission. Type 2: partial powershift transmission with 16 forward and 8 reverse gears. The maximum travel speed is 15.7mph / 25.2 km/h (forward) and 4.8 mph / 7.9 km/h (reverse).

The open center hydraulic system includes a gear pump with fluid flow rate of 15,6 gpm (59 lpm). The main relief pressure is 175 bar (2500 psi). The two-wheel drive tractors are equipped with 7.50x16 front tyres and 16.9x28 rear tyres. The 8.3x24 front tyres and 23.1x34 rear tyres fit four-wheel drive models. The wheelbase is 84.5 inches (2140 mm) for 2WD (4x2) models and 88 inches (2230 mm) for 4WD (4x4) models.

Engine
Engine Model Case D206
Engine Type 4 stroke, four-cylinder diesel
Number of Cylinders 4
Displacement, cu in (L) 206 (3,38)
Engine Bore, in (mm) 3,87 (98,4)
Engine Stroke, in (mm) 4,39 (111,2)
Aspiration Natural
Rated Engine Power, hp (kW) 56,1 (41,8)
Maximum Engine Power, hp (kW) 59,9 (44,7)
Rated Engine Speed, rpm 2300
Maximum Torque, Nm (ft-lbs) 220 (163,2)
Torque Speed, rpm 1400
Fuel Tank Capacity, gal (L) 29,6 (112,0)
Oil Capacity, qts (L) 7,9 (7,5)
Coolant Capacity, qts (L) 14,5 (13,7)
Electrical System Rating, Volts 12
Alternator Rating, Amps 45/65

Power Take-Off
PTO Operational Type Independent
PTO Horsepower, hp (kW) 52,0 (38,8)
PTO Clutch Hydraulic wet disc
PTO Speeds, rpm 540 (540/1000 optional)

Standard Transmission
Transmission Type Synchromesh
Gearbox Type 8F/4R
Number of Forward Gears 8
Number of Reverse Gears 4
Clutch Type Dry cerametallic disc
Clutch Disc Diameter, in (mm) 11 (280)
Oil Capacity (2WD), qts (L) 35,9 (34,0)
Oil Capacity (4WD), qts (L) 38,6 (36,5)
Maximum Speed (Forward), mph (kph) 15,7 (25,2)
Maximum Speed (Reverse), mph (kph) 4,8 (7,9)

Optional Transmission
Transmission Type Partial Powershift
Gearbox Type 16F/8R
Number of Forward Gears 16
Number of Reverse Gears 8
Clutch Type Dry cerametallic disc
Clutch Disc Diameter, in (mm) 11 (280)
Oil Capacity (2WD), qts (L) 35,9 (34,0)
Oil Capacity (4WD), qts (L) 38,6 (36,5)
Maximum Speed (Forward), mph (kph) 15,7 (25,2)
Maximum Speed (Reverse), mph (kph) 4,8 (7,9)

Wheels and Tires
Drive Wheels 2WD/4WD
Steering Configuration Front Steer
Steering System Hydrostatic power
Service Brake Hydraulic wet disc
Front Tire Size (2WD) 7.50-16
Rear Tire Size (2WD) 16.9-28
Front Tire Size (4WD) 8.3-24
Rear Tire Size (4WD) 23.1x34

Hydraulic System
Hydraulic System Type Open center
Implement Pump Flow, gpm (Lpm) 15,6 (59,0)
Hydraulic Oil Capacity, gal (L) 9,0 (34,2)
Hydraulic Pressure, Bar (psi) 172 (2500)
Number of Standard Remote Valves 0/3
3-Point Hitch Category 2
Draft Sensing or Lift Control Draft and position control
Standard Lift Capacity at lift pin, lb (kg) 3665 (1660)

Dimensions and Weight
Wheelbase (2WD), in (mm) 84,5 (2140)
Wheelbase (4WD), in (mm) 88 (2230)
Length, in (mm) 143 (3620)
Height, in (mm) 102 (2600)
Turning Radius, in (mm) 157 (4000)
Front Tread (2WD), in (mm) 48 to 80 (1210 to 2030)
Weight (2WD), lb (kg) 6150 (2790)
Weight (4WD), lb (kg) 6910 (3130)

________________________________________________________________________________________

________________________________________________________________________________________

Farm Tractors Technical Specifications
JD 1026R JD 3650 JD 6400 JD 7810
KUBOTA B7500 KUBOTA L245 KUBOTA L2250 KUBOTA M4072
FORD 1320 FORD 2810 FORD 3930 FORD 5600
MF 250 MF 690 MF 3060 MF 6180
NH TC48DA NH M100 NH T7550 NH 8560
CASE IH 495 CASE IH 1255XL CASE IH 2140 CASE IH 2294