________________________________________________________________________________________

Home / Farm Tractors / Case IH Tractors / Case IH 1694

Case IH 1694 Tractor

The Case IH 1694 tractor was manufactured from 1985 to 1988. The Case IH 1694 driveline system components: AD6.55T 6 cylinders direct injection turbocharged diesel engine and Hydra-Shift partial powershift transmission with 12 forward and 4 reverse gears.

A 329 cubic inches (5.4 L) engine power rating is 112 hp (83.5 kW), and max. torque is 396 Nm (293.3 lb-ft) at 1600 rpm. Max. travel speed (forward/reverse): 19.7 mph (31.7 km/h) and 11.6 mph (18.7 km/h). The open center hydraulic system used a gear pump with fluid flow rate of 10.5 gpm (39.8 lpm).

The hydraulic system pressure is 180 bar (2600 psi). The Case IH 1694 tractor is equipped with a hydrostatic steering system, disc brakes, 13.6x28 front tires, and 16.9x38 rear tires. The wheelbase is 100 inches (2540 mm).

Engine
Engine Model AD6.55T
Engine Type 6 cylinder direct injection diesel
Number of Cylinders Six
Displacement, cu in (L) 329,0 (5,40)
Engine Bore, in (mm) 3,94 (100,0)
Engine Stroke, in (mm) 4,49 (114,0)
Rated Engine Power, hp (kW) 112,0 (83,5)
Rated Engine Speed, rpm 2300
Maximum Torque, Nm (ft-lbs) 396 (293,3)
Torque Speed, rpm 1600
Compression 16:1
Fuel Tank Capacity, gal (L) 35,9 (136,0)
Oil Capacity, qts (L) 13,2 (12,5)
Coolant Capacity, qts (L) 16,2 (15,3)
Electrical System Rating, Volts 12
Charging System Alternator
Alternator Rating, Amps 45/65
Battery Power, Ah 96

Power Take-Off
PTO Operational Type Independent
PTO Horsepower, hp (kW) 99,0 (73,8)
PTO Speeds, rpm 540/1000

Transmission
Transmission Type Hydra-Shift
Gearbox Type 12F/4R, Partial power shift
Number of Forward Gears 12
Number of Reverse Gears 4
Oil Capacity, qts (L) 33,6 (31,8)
Maximum Forward Speed, mph (kph) 19,7 (31,7)
Maximum Reverse Speed, mph (kph) 11,6 (18,7)

Wheels and Tires
Drive Wheels 4WD 4x4
Steering Configuration Front Steer
Steering System Hydrostatic power
Service Brake Disc
Front Tire Size 13.6-28
Rear Tire Size 16.9-38

Hydraulic System
Hydraulic System Type Open center
Implement Pump Flow, gpm (Lpm) 10,5 (39,8)
Steering Pump Flow, gpm (Lpm) 7,7 (28,0)
Total Flow, gpm (Lpm) 20,5 (76,5)
Hydraulic Pressure, Bar (psi) 180 (2600)
Steering Pressure, Bar (psi) 128 (1850)
Number of Standard Remote Valves 1 to 3
3-Point Hitch Category 2
Standard Lift Capacity at lift pin, lb (kg) 7440 (3370)
Standard Lift Capacity 24-in behind pin, lb (kg) 6290 (2855)

Dimensions and Weight
Wheelbase, in (mm) 100 (2540)
Length, in (mm) 166 (4200)
Height, in (mm) 108 (2740)
Overall Width, in (mm) 79 (2000)
Ground Clearance, in (mm) 16,5 (410)
Front Tread, in (mm) 60 to 76 (1520 to 1930)
Rear Tread, in (mm) 56 to 84 (1420 to 2130)
Weight, lb (kg) 9580 (4350)

________________________________________________________________________________________

________________________________________________________________________________________

Farm Tractors Technical Specifications
JD 1026R JD 3650 JD 6400 JD 7810
KUBOTA B7500 KUBOTA L245 KUBOTA L2250 KUBOTA M4072
FORD 1320 FORD 2810 FORD 3930 FORD 5600
MF 250 MF 690 MF 3060 MF 6180
NH TC48DA NH M100 NH T7550 NH 8560
CASE IH 495 CASE IH 1255XL CASE IH 2140 CASE IH 2294