________________________________________________________________________________________

Home / Farm Tractors / Case IH Tractors / Case IH 3220

Case IH 3220 Specifications

The Case IH 3220 is a 2WD or 4WD utility tractor from 3200 utility series. This model was manufactured from 1994 to 1997. The components of Case IH 3220 powerline system: a 179 cubic inches (2.9 L) Case D179 three-cylinder liquid-cooled diesel engine with a rated power of 50 hp (37.3 kW), and synchromesh transmission with 8 forward and 4 reverse gears or shuttle transmission with 8 forward and 8 reverse gears.

The maximum travel speed (forward/reverse): 15.7 mph (25.2 km/h) and 5.2 mph (8.3 km/h). The open center hydraulic system includes a gear pump with rated fluid flow of 15.6 gal/min (59 l/min). The hydraulic pressure is 172 bar (2500 psi). The Case IH 3220 is equipped with a hydrostatic power steering, hydraulic wet disc brakes, 7.50-16 (2WD) or 11.2 R24 (4WD) front tyres, and 16.9-28 (2WD) or 23.1x34 (4WD) rear tyres. The wheelbase is 79.8" (2020 mm) for two-wheel drive models and 83.2" (2110 mm) for four-wheel drive models.

Engine
Engine Model Case D179
Engine Type 4 stroke, 3-cylinder diesel
Number of Cylinders Three
Displacement, cu in (L) 179 (2,9)
Engine Bore, in (mm) 3,87 (98,4)
Engine Stroke, in (mm) 5,06 (128,5)
Aspiration Natural
Rated Engine Power, hp (kW) 50,0 (37,3)
Maximum Engine Power, hp (kW) 52,9 (39,5)
Rated Engine Speed, rpm 2180
Maximum Torque, Nm (ft-lbs) 182 (134,7)
Torque Speed, rpm 1400
Fuel Tank Capacity, gal (L) 20,0 (75,7)
Oil Capacity, qts (L) 7,9 (7,5)
Coolant Capacity, qts (L) 12,0 (11,4)
Electrical System Rating, Volts 12
Alternator Rating, Amps 45/60

Power Take-Off
PTO Operational Type Independent
PTO Horsepower, hp (kW) 42,0 (31,3)
Clutch Hydraulic wet disc
PTO Speeds, rpm 540 (540/1000 optional)

Standard Transmission
Transmission Type Synchromesh
Gearbox Type 8F/4R
Number of Forward Gears 8
Number of Reverse Gears 4
Clutch Type Dry cerametallic disc
Clutch Disc Diameter, in (mm) 11 (280)
Oil Capacity (2WD), qts (L) 35,9 (34,0)
Oil Capacity (4WD), qts (L) 38,6 (36,5)
Maximum Speed (Forward), mph (kph) 15,7 (25,2)
Maximum Speed (Reverse), mph (kph) 4,8 (7,9)

Optional Transmission
Transmission Type Shuttle
Gearbox Type 8F/8R
Number of Forward Gears 8
Number of Reverse Gears 8
Clutch Type Dry cerametallic disc
Clutch Disc Diameter, in (mm) 12 (300)
Oil Capacity (2WD), qts (L) 35,9 (34,0)
Oil Capacity (4WD), qts (L) 38,6 (36,5)
Maximum Speed (Forward), mph (kph) 15,7 (25,2)
Maximum Speed (Reverse), mph (kph) 5,2 (8,3)

Wheels and Tires
Drive Wheels 2WD/4WD
Steering Configuration Front Steer
Steering System Hydrostatic power
Service Brake Hydraulic wet disc
Front Tire Size (2WD) 7.50-16
Rear Tire Size (2WD) 16.9-28
Front Tire Size (4WD) 11.2 R24
Rear Tire Size (4WD) 23.1x34

Hydraulic System
Hydraulic System Type Open center
Implement Pump Flow, gpm (Lpm) 15,6 (59,0)
Hydraulic Oil Capacity, gal (L) 9,0 (34,2)
Hydraulic Pressure, Bar (psi) 172 (2500)
Number of Standard Remote Valves 0/3
3-Point Hitch Category 2
Draft Sensing or Lift Control Draft and position control
Standard Lift Capacity at lift pin, lb (kg) 3665 (1660)

Dimensions and Weight
Wheelbase (2WD), in (mm) 79,8 (2020)
Wheelbase (4WD), in (mm) 83,2 (2110)
Length, in (mm) 133 (3380)
Height, in (mm) 94 (2400)
Turning Radius, in (mm) 150 (3800)
Front Tread (2WD), in (mm) 52 to 77 (1320 to 1950)
Weight (2WD), lb (kg) 5620 (2550)
Weight (4WD), lb (kg) 6330 (2870)

________________________________________________________________________________________

________________________________________________________________________________________

Farm Tractors Technical Specifications
JD 1026R JD 3650 JD 6400 JD 7810
KUBOTA B7500 KUBOTA L245 KUBOTA L2250 KUBOTA M4072
FORD 1320 FORD 2810 FORD 3930 FORD 5600
MF 250 MF 690 MF 3060 MF 6180
NH TC48DA NH M100 NH T7550 NH 8560
CASE IH 495 CASE IH 1255XL CASE IH 2140 CASE IH 2294