________________________________________________________________________________________

Home / Farm Tractors / Case IH Tractors / Case IH 7110 Magnum

Case IH 7110 Magnum Specifications

The Case IH Magnum 7110 is a 2-wheel drive or 4-wheel drive row-crop tractor. This model was manufactured from 1987 to 1993. The components of Case IH Magnum 7110 powerline system: a 505 cubic inches (8.3 L) Case-International 6T-830 six-cylinder turbocharged diesel engine with a rated power of 158 hp (117.3 kW), and full powershift transmission with 18 forward and 2 reverse gears or creeper transmission with 24 forward and 3 reverse gears.

The maximum travel speed (forward/reverse): 18.3 mph (29.4 km/h) and 2.9 mph (4.7 km/h). The closed center hydraulic system includes a piston pump with rated fluid flow of 22 gal/min (83.3 l/min). The hydraulic pressure is 180 bar (2600 psi).

The 2-wheel drive models are equipped with 11.00x16 front tires and 18.4R38 rear tires. The 13.6R28 front tires and 18.4R38 rear tires are used for tractors with 4-wheel drive. The wheelbase is 118.3" (3000 mm).

Engine
Engine Model Case-International 6T-830
Engine Type 6-cylinder, 12-valve, turbocharged diesel
Number of Cylinders Six
Displacement, cu.in (L) 505 (8,3)
Engine Bore, in (mm) 4,49 (114,0)
Engine Stroke, in (mm) 5,32 (135,0)
Aspiration Turbocharged
Rated Engine Power, hp (kW) 158,0 (117,3)
Rated Engine Speed, rpm 2200
Idle Speed, rpm 825-2395
Compression 17.3:1
Firing Order 1-5-3-6-2-4
Fuel Injection Pump Bosch PS6A
Valve Clearance (Intake), in (mm) 0,012 (0,305)
Valve Clearance (Exhaust), in (mm) 0,024 (0,609)
Fuel Tank Capacity, gal (L) 78,0 (295,0)
Oil Capacity, qts (L) 22,0 (21,0)
Coolant Capacity, qts (L) 30,0 (28,6)
Electrical System Rating, Volts 12
Alternator Rating, Amps 110

Power Take-Off
PTO Operational Type Independent
PTO Horsepower, hp (kW) 130,0 (96,9)
PTO Clutch Wet disc
PTO Speeds, rpm 540/1000
PTO / Engine Speeds, rpm 540/2230
PTO / Engine Speeds, rpm 1000/2200

Standard Transmission
Transmission Type Full power shift
Gearbox Type 18F/2R
Number of Forward Gears 18
Number of Reverse Gears 2
Clutch Type Hydraulic wet disc
Maximum Speed (Forward), mph (kph) 18,3 (29,4)
Maximum Speed (Reverse), mph (kph) 2,9 (4,7)

Optional Transmission
Transmission Type Powershift with creeper
Gearbox Type 24F/3R
Number of Forward Gears 24
Number of Reverse Gears 3
Clutch Type Hydraulic wet disc
Maximum Speed (Forward), mph (kph) 18,3 (29,4)
Maximum Speed (Reverse), mph (kph) 2,9 (4,7)
Maximum Forward Speed (Creeper), mph (kph) 2,0 (3,2)
Maximum Reverse Speed (Creeper), mph (kph) 0,7 (1,1)

Wheels and Tires
Drive Wheels 2WD/4WD
Steering Configuration Front Steer
Steering System Hydrostatic power
Service Brake Differential hydraulic wet disc
Front Tire Size (2WD) 11.00-16
Rear Tire Size (2WD) 18.4R38
Front Tire Size (4WD) 13.6R28
Rear Tire Size (4WD) 18.4R38

Hydraulic System
Hydraulic System Type Closed center (PFC)
Implement Pump Flow, gpm (Lpm) 22,0 (83,3)
Total Flow, gpm (Lpm) 29,0 (110,0)
Hydraulic Pressure, Bar (psi) 180 (2600)
Hydraulic Capacity, gal (L) 50,5 (191,0)
Number of Standard Remote Valves 2/4
3-Point Hitch Category 3/3N
Draft Sensing or Lift Control Electronic lower link
Standard Lift Capacity 24-in behind pin, lb (kg) 7700 (3490)

Dimensions and Weight
Wheelbase, in (mm) 118,3 (3000)
Length (2WD), in (mm) 191 (4850)
Length (4WD), in (mm) 197,7 (5020)
Height (2WD), in (mm) 118,2 (2995)
Height (4WD), in (mm) 117,4 (2980)
Ground Clearance (2WD), in (mm) 22,4 (560)
Ground Clearance (4WD), in (mm) 16,6 (420)
Front Tread (2WD), in (mm) 60-86 (1520-2180)
Front Tread (4WD), in (mm) 60-95 (1520-2410)
Rear Tread, in (mm) 60-125 (1520-3170)
Weight (2WD), lb (kg) 15280 (6930)
Weight (4WD), lb (kg) 16540 (7500)

________________________________________________________________________________________

________________________________________________________________________________________

Farm Tractors Technical Specifications
JD 1026R JD 3650 JD 6400 JD 7810
KUBOTA B7500 KUBOTA L245 KUBOTA L2250 KUBOTA M4072
FORD 1320 FORD 2810 FORD 3930 FORD 5600
MF 250 MF 690 MF 3060 MF 6180
NH TC48DA NH M100 NH T7550 NH 8560
CASE IH 495 CASE IH 1255XL CASE IH 2140 CASE IH 2294