Home / Farm Tractors / Case IH Tractors / Case IH 7130 Magnum

Case IH 7130 Magnum Specifications

The Case IH 7130 is a 2WD or 4WD row-crop tractor from Magnum series. This model was manufactured between 1987 and 1993. The Case IH Magnum 7130 tractor is powered by 505 cu.in (8.3 L) Case-International 6T-830 vertical in-line 6-cylinder turbocharged diesel engine with a rated power of 208 hp (153.6 kW).

The Case IH Magnum 7130 is fitted with a two transmission options: full powershift transmission with 18 forward and 2 reverse gears or creeper transmission with 24 forward and 3 reverse gears. The maximum travel speed (forward/reverse): 19.6 mph (31.5 km/h) and 3 mph (4.8 km/h).

The closed center hydraulic system has a piston pump with a rated capacity of 22 gpm (83.3 lpm). The hydraulic system pressure is 180 bar (2600 psi). The 2WD models are equipped with 14L-16.1 front tyres and 18.4R42 rear tyres. The 14.9R28 front tyres and 18.4R42 rear tyres are used for 4WD tractors. The wheelbase is 118.3 inches (3000 mm).

Engine Model Case-International 6T-830
Engine Type 6-cylinder, 12-valve, turbocharged diesel
Number of Cylinders Six, vertical inline
Displacement, cu in (L) 505 (8,3)
Engine Bore, in (mm) 4,49 (114,0)
Engine Stroke, in (mm) 5,32 (135,0)
Aspiration Turbocharged
Rated Engine Power, hp (kW) 208,0 (153,6)
Rated Engine Speed, rpm 2200
Idle Speed, rpm 825-2395
Compression 17.3:1
Firing Order 1-5-3-6-2-4
Fuel Injection Pump Bosch PS6A
Valve Clearance (Intake), in (mm) 0,012 (0,305)
Valve Clearance (Exhaust), in (mm) 0,024 (0,609)
Fuel Tank Capacity, gal (L) 95,0 (359,0)
Oil Capacity, qts (L) 22,0 (21,0)
Coolant Capacity, qts (L) 30,0 (28,6)
Electrical System Rating, Volts 12
Alternator Rating, Amps 110

Power Take-Off
PTO Operational Type Independent
PTO Horsepower, hp (kW) 170,0 (126,8)
PTO Clutch Wet disc
PTO Speeds, rpm 1000
PTO / Engine Speeds, rpm 1000/2200

Standard Transmission
Transmission Type Full power shift
Gearbox Type 18F/2R
Number of Forward Gears 18
Number of Reverse Gears 2
Clutch Type Hydraulic wet disc
Maximum Speed (Forward), mph (kph) 19,6 (31,5)
Maximum Speed (Reverse), mph (kph) 3,0 (4,8)

Optional Transmission
Transmission Type Powershift with creeper
Gearbox Type 24F/3R
Number of Forward Gears 24
Number of Reverse Gears 3
Clutch Type Hydraulic wet disc
Maximum Speed (Forward), mph (kph) 19,6 (31,5)
Maximum Speed (Reverse), mph (kph) 3,0 (4,8)
Maximum Forward Speed (Creeper), mph (kph) 2,2 (3,5)
Maximum Reverse Speed (Creeper), mph (kph) 0,8 (1,3)

Wheels and Tires
Drive Wheels 2WD/4WD
Steering Configuration Front Steer
Steering System Hydrostatic power
Service Brake Differential hydraulic wet disc
Front Tire Size (2WD) 14L-16.1
Rear Tire Size (2WD) 18.4R42
Front Tire Size (4WD) 14.9R28
Rear Tire Size (4WD) 18.4R42

Hydraulic System
Hydraulic System Type Closed center (PFC)
Implement Pump Flow, gpm (Lpm) 22,0 (83,3)
Total Flow, gpm (Lpm) 29,0 (110,0)
Hydraulic Pressure, Bar (psi) 180 (2600)
Hydraulic Capacity, gal (L) 50,5 (191,0)
Number of Standard Remote Valves 2/4
3-Point Hitch Category 3/3N
Draft Sensing or Lift Control Electronic lower link
Standard Lift Capacity 24-in behind pin, lb (kg) 9300 (4220)

Dimensions and Weight
Wheelbase, in (mm) 118,3 (3000)
Length (2WD), in (mm) 191,4 (4860)
Length (4WD), in (mm) 198,8 (5040)
Height (2WD), in (mm) 119,3 (3030)
Height (4WD), in (mm) 118,3 (3000)
Ground Clearance (2WD), in (mm) 22,8 (570)
Ground Clearance (4WD), in (mm) 17,6 (440)
Front Tread (2WD), in (mm) 60-86 (1520-2180)
Front Tread (4WD), in (mm) 60-95 (1520-2410)
Rear Tread, in (mm) 60-127 (1520-3220)
Weight (2WD), lb (kg) 16280 (7390)
Weight (4WD), lb (kg) 17540 (7960)



Farm Tractors Technical Specifications
JD 1026R JD 3650 JD 6400 JD 7810
FORD 1320 FORD 2810 FORD 3930 FORD 5600
MF 250 MF 690 MF 3060 MF 6180
NH TC48DA NH M100 NH T7550 NH 8560
CASE IH 495 CASE IH 1255XL CASE IH 2140 CASE IH 2294