________________________________________________________________________________________

Home / Farm Tractors / Case IH Tractors / Case IH 845XL

Case IH 845 XL Specifications

The Case IH 845XL utility tractor was manufactured between 1987 and 1996. The Case IH 845 XL driveline consists of International D268 4-cylinder direct injection liquid-cooled diesel engine and 16x8 IH Total-Synchron fully synchronized transmission.

A 268 cubic inches (4.4 L) engine has a cylinder bore of 3.94" (100 mm), piston stroke of 5.5" (140 mm), and rated power of 80 hp (59.7 kW). The maximum forward speed - 10.8 mph (17.4 km/h), maximum reverse speed - 18 mph (28.9 km/h).

The open center hydraulic system includes a gear pump with rated fluid flow of 8.7 gpm (32.9 lpm). The hydraulic system pressure is 167 bar (2420 psi). The Case IH 845XL is equipped with a hydrostatic power steering, wet disc brakes, 10.0-R16 (2WD) or 11.2-R28 (4WD) front tyres, and 18.4-R34 rear tyres. The wheelbase is 94.1" (2390 mm) for 2WD tractors and 92.5" (2340 mm) for 4WD tractors.

Engine
Engine Model IH D268
Engine Type 4-stroke, 4-cylinder liquid-cooled diesel
Number of Cylinders 4
Displacement, cu in (L) 268 (4.40)
Engine Bore, in (mm) 3.94 (100.0)
Engine Stroke, in (mm) 5.50 (140.0)
Aspiration Natural
Rated Engine Power, hp (kW) 80.0 (59.7)
Rated Engine Speed, rpm 2300
Maximum Torque, Nm (ft-lbs) 296 (218)
Torque Speed, rpm 1300
Compression 16:1
Fuel System Direct injection
Fuel Tank Capacity, gal (L) 28.0 (106.0)
Oil Capacity, qts (L) 12.7 (12.0)
Coolant Capacity, qts (L) 20.4 (19.3)
Electrical System Rating, Volts 12
Charging System Alternator
Alternator Rating, Amps 55

Power Take-Off
PTO Operational Type Independent
PTO Horsepower, hp (kW) 66.3 (51.5)
PTO Clutch Hydraulic
PTO Speeds, rpm 540/1000

Transmission
Transmission Type IH Total-Synchron
Gearbox Type 16F/8R, fully synchronized
Number of Forward Gears 16
Number of Reverse Gears 8
Clutch Dry disc
Maximum Forward Speed, mph (kph) 18.0 (28.9)
Maximum Reverse Speed, mph (kph) 10.8 (17.4)

Wheels and Tires
Drive Wheels 2WD/4WD
Steering Configuration Front Steer
Steering System Hydrostatic power
Brakes Type Wet disc
Front Tire Size (2WD) 10.0-R16
Rear Tire Size (2WD) 18.4-R34
Front Tire Size (4WD) 11.2-R28
Rear Tire Size (4WD) 18.4-R34

Hydraulic System
Hydraulic System Type Open Center
Implement Pump Flow, gpm (Lpm) 8.7 (32.9)
Hydraulic Pressure, Bar (psi) 167 (2420)
Number of Standard Remote Valves 1/3
3-Point Hitch Category 2
Draft Sensing or Lift Control Lower link draft sensing
Standard Lift Capacity at lift pin, lb (kg) 6945 (3150)

Dimensions and Weight
Wheelbase (2WD), in (mm) 94.1 (2390)
Wheelbase (4WD), in (mm) 92.5 (2340)
Length (2WD), in (mm) 153.2 (3890)
Length (4WD), in (mm) 156.3 (3970)
Height (Cab), in (mm) 106.2 (2690)
Overall Width, in (mm) 80.7 (2040)
Ground Clearance (2WD), in (mm) 19.1 (480)
Ground Clearance (4WD), in (mm) 15.9 (400)
Weight (2WD), lb (kg) 8070 (3660)
Weight (4WD), lb (kg) 8750 (3970)

________________________________________________________________________________________

________________________________________________________________________________________

Farm Tractors Technical Specifications
JD 1026R JD 3650 JD 6400 JD 7810
KUBOTA B7500 KUBOTA L245 KUBOTA L2250 KUBOTA M4072
FORD 1320 FORD 2810 FORD 3930 FORD 5600
MF 250 MF 690 MF 3060 MF 6180
NH TC48DA NH M100 NH T7550 NH 8560
CASE IH 495 CASE IH 1255XL CASE IH 2140 CASE IH 2294