________________________________________________________________________________________

Home / Farm Tractors / Case IH Tractors / Case IH 956XL

Case IH 956 XL Specifications

The Case IH 956 XL is a 2WD or 4WD utility tractor. This model was manufactured between 1985 and 1992. The Case IH 956XL tractor is powered by 358 cu.in (5.9 L) International Harvester D358 4-cycle 4-cylinder direct injection liquid-cooled diesel engine with a rated power of 95 hp (70.8 kW) at 2200 rpm.

The Case IH 956 XL is fitted with IH Total-synchron transmission with 16 forward and 8 reverse gears. The maximum forward speed - 17.4 mph (28 km/h), maximum reverse speed - 6.6 mph (10.6 km/h). The open center hydraulic system has a gear pump with a rated capacity of 11.4 gal/min (43 l/min).

The hydraulic system pressure is 175 bar (2535 psi). The 2WD models are equipped with 7.50x20 front tires and 16.9R38 rear tires. The 12.4R28 front tires and 16.9R38 rear tires are used for 4WD tractors. The wheelbase is 103.5" (2620 mm) for 2-wheel drive tractors and 102" (2590 mm) for 4-wheel drive tractors.

Engine
Engine Model International Harvester D358
Engine Type 4-stroke, 4-cylinder direct injection diesel
Number of Cylinders Four
Displacement, cu in (L) 358 (5,90)
Engine Bore, in (mm) 3,88 (98,0)
Engine Stroke, in (mm) 5,06 (129,0)
Aspiration Natural
Rated Engine Power, hp (kW) 95,0 (70,8)
Rated Engine Speed, rpm 2200
Maximum Torque, Nm (ft-lbs) 355 (261,8)
Torque Speed, rpm 1400
Fuel System Direct injection
Fuel Tank Capacity, gal (L) 37,0 (140,0)
Oil Capacity, qts (L) 12,7 (12,0)
Coolant Capacity, qts (L) 22,3 (21,0)
Electrical System Rating, Volts 12
Charging System Alternator
Alternator Rating, Amps 55

Power Take-Off
PTO Operational Type Independent
PTO Horsepower, hp (kW) 77,9 (57,7)
PTO Speeds, rpm 540/1000

Transmission
Transmission Type IH-Total-synchron
Gearbox Type 16F/8R
Number of Forward Gears 16
Number of Reverse Gears 8
Transmission Capacity, qts (L) 44,5 (42,0)
Maximum Forward Speed, mph (kph) 17,4 (28,0)
Maximum Reverse Speed, mph (kph) 6,6 (10,6)

Wheels and Tires
Drive Wheels 2WD/4WD
Steering Configuration Front Steer
Steering System Hydrostatic power
Service Brake Wet disc
Front Tire Size (2WD) 7.50-20
Rear Tire Size (2WD) 16.9R38
Front Tire Size (4WD) 12.4R28
Rear Tire Size (4WD) 16.9R38

Hydraulic System
Hydraulic System Type Open Center
Implement Pump Flow, gpm (Lpm) 11,4 (43,0)
Hydraulic Pressure, Bar (psi) 175,0 (2535)
Number of Standard Remote Valves 3
3-Point Hitch Category 2
Draft Sensing or Lift Control Position and draft control
Standard Lift Capacity at lift pin, lb (kg) 9530 (4320)
Optional Lift Capacity at lift pin, lb (kg) 11530 (5230)

Dimensions and Weight
Wheel Base (2WD), in (mm) 103,5 (2620)
Wheel Base (4WD), in (mm) 102 (2590)
Length (2WD), in (mm) 165,1 (4190)
Length (4WD), in (mm) 167,7 (4250)
Overall Width, in (mm) 90,8 (2300)
Height, in (mm) 109,1 (2770)
Clearance (2WD), in (mm) 20,2 (510)
Clearance (4WD), in (mm) 17,2 (430)
Front Tread (2WD), in (mm) 60,1-95,2 (1520-2410)
Front Tread (4WD), in (mm) 64,3-76,1 (1630-1930)
Rear Tread, in (mm) 67,1-86,8 (1700-2200)
Turning radius, in (mm) 199 (5050)
Weight (2WD), lb (kg) 9460 (4290)
Weight (4WD), lb (kg) 10300 (4670)

________________________________________________________________________________________

________________________________________________________________________________________

Farm Tractors Technical Specifications
JD 1026R JD 3650 JD 6400 JD 7810
KUBOTA B7500 KUBOTA L245 KUBOTA L2250 KUBOTA M4072
FORD 1320 FORD 2810 FORD 3930 FORD 5600
MF 250 MF 690 MF 3060 MF 6180
NH TC48DA NH M100 NH T7550 NH 8560
CASE IH 495 CASE IH 1255XL CASE IH 2140 CASE IH 2294