Home / Farm Tractors / Case IH Tractors / Case IH DX35

Case IH DX35 Specifications

The Case IH DX35 is a 4WD compact utility tractor from DX-series. This model was manufactured between 2001 and 2006. The Case IH DX-35 tractor is powered by 101 cu.in (1.7 L) Shibaura N843L 3-cylinder liquid-cooled diesel engine with a rated power of 35 hp (26.1 kW) at 2600 rpm. The tractor is fitted with a 2-range hydrostatic transmission with infinite forward and reverse gears.

The maximum forward speed - 13.6 mph (21.9 km/h), maximum reverse speed - 13.6 mph (21.9 km/h). The open center hydraulic system has implement pump with a rated capacity of 9.8 gal/min (37.1 l/min), and steering pump with a rated capacity of 5.1 gal/min (19.3 l/min).

The tractor is equipped with a hydrostatic power steering, wet disc brakes, 7.00x16 (Std) or 25x8.50-14 (Turf) front tyres, and 13.6x24 (Std) or 44x18.0-20 (Turf) rear tyres. Compatible attachments for Case IH DX35 tractor: 84" mid-mount 4-blade Case MWX84R mower deck, and Case IH L160 loader with lift capacity to max height of 1800 lbs (816 kg) and breakout force of 3186 lbs (1445 kg).

Engine Model Shibaura N843L
Engine Type 4-Stroke, vertical 3-cylinder diesel
Number of Cylinders 3
Displacement, cu in (L) 101 (1.66)
Engine Bore, in (mm) 3.31 (84.0)
Engine Stroke, in (mm) 3.94 (100.0)
Rated Engine Power, hp (kW) 35.0 (26.1)
Rated Engine Speed, rpm 2600
Low Idle Speed, rpm 1025
Compression Ratio 22.5:1
Firing Order 1-2-3
Fuel Pump Type In-Line
Pre-Heating Glow plugs
Fuel Tank Capacity, gal (L) 13.0 (49.5)
Oil Capacity, qts (L) 6.1 (5.8)
Coolant Capacity, qts (L) 7.8 (7.4)
Electrical System Rating, Volts 12
Charging System Alternator
Alternator Rating, Amps 40

Power Take-Off
PTO Horsepower, hp (kW) 29.1 (21.7)
Rear PTO Operational Type Independent
Rear PTO Speed, rpm 540
Mid PTO Optional
Mid PTO Speed, rpm 2000

Transmission Type Hydrostatic (HST)
Number of Forward Gears 2 Ranges (Hi-Lo)
Number of Reverse Gears 2 Ranges (Hi-Lo)
Pump Displacement, cu in (L) 1.71 (0.03)
Motor Displacement (High), cu in (L) 1.34 (0.02)
Motor Displacement (Low), cu in (L) 2.27 (0.04)
Motor Hi-Lo Speed Shift Electric Switch
Maximum Forward Speed, mph (kph) 13.6 (21.9)
Maximum Reverse Speed, mph (kph) 13.6 (21.9)

Wheels and Tires
Drive Wheels 4WD 4x4
Steering Configuration Front steer
Steering System Hydrostatic power
Brakes Type Mechanical wet disc
Front Tire Size (Std) 7.00-16
Rear Tire Size (Std) 13.6-24
Front Tire Size (Turf) 25x8.50-14
Rear Tire Size (Turf) 44x18.0-20
Front Tread, in (mm) 46.4 (1170)
Rear Tread, in (mm) 47.1-67.4 (1190-1710)

Hydraulic System
Hydraulic System Type Open center
Implement Pump Flow, gpm (Lpm) 9.8 (37.1)
Steering Pump Flow, gpm (Lpm) 5.1 (19.3)
Number of Standard Remote Valves 1/2
3-Point Hitch Category 1
Draft Sensing or Lift Control Position control
Standard Lift Capacity 24-in (610mm) behind pin, lb (kg) 2025 (920)

Dimensions and Weight
Wheelbase, in (mm) 73.5 (1860)
Length, in (mm) 116.3 (2950)
Overall Width, in (mm) 94.5 (2400)
Weight, lb (kg) 3250 (1475)

72" Mower Deck
Mower Model MWX72R
Mower Deck Type Mid-mounted, direct drive finishing mower
Discharge Rear
Number of Blades 3
Blade Type Standard
Blade Length, in (mm) 24.5 (622)
Blade Width, in (mm) 3 (76)
Cutting Width, in (mm) 72 (1830)
Cutting Height, in (mm) 1.5-4.0 (38-102)
Drive Type Mid PTO
Gauge Wheels Size, in (mm) 6x2.5 (152x64)
Overall Width, in (mm) 74.4 (1890)
Weight, lbs (kg) 515 (234)

Front End Loader
Loader Model L160
Maximum Height (To Pin), in (mm) 105 (2660)
Clearance, Dumped Bucket, in (mm) 81.5 (2070)
Dump Reach, in (mm) 33 (830)
Dump Angle, degrees 58
Rollback Angle, degrees 30
Breakout Force (Lift), lbs (kg) 3186 (1445)
Lift To Full Height (At Pin), lbs (kg) 1800 (816)
Weight, lbs (kg) 1100 (500)



Farm Tractors Technical Specifications
JD 1026R JD 3650 JD 6400 JD 7810
FORD 1320 FORD 2810 FORD 3930 FORD 5600
MF 250 MF 690 MF 3060 MF 6180
NH TC48DA NH M100 NH T7550 NH 8560
CASE IH 495 CASE IH 1255XL CASE IH 2140 CASE IH 2294