________________________________________________________________________________________

Home / Farm Tractors / Case IH Tractors / Case IH DX45

Case IH DX45 Specifications

The Case IH DX45 is a 4WD compact utility tractor. This model was manufactured from 2001 to 2006. The components of Case IH DX45 powerline system: a 135.2 cubic inches (2.2 L) Shibaura N844L 4-cylinder liquid-cooled diesel engine with a rated power of 45 hp (33.6 kW), and two-range hydrostatic transmission with infinite forward and reverse gears.

The maximum travel speed (forward/reverse): 13.6 mph (21.9 km/h). The open center hydraulic system includes an implement pump with rated fluid flow of 9.8 gal/min (37.1 l/min) and steering pump with rated fluid flow of 5.1 gal/min (19.3 l/min). The Case IH DX45 is equipped with a hydrostatic power steering system, wet disc brakes, 8.00x16 or 27x8.50-15 front tyres, and 14.9x24 or 44x18.0-20 rear tyres.

The wheelbase is 73.5 in (1860 mm). The tractor is compatible with a 84" mid-mount 4-blade Case IH MWX84R mower deck with cutting height of 2.0-4.0 in (51-102 mm), and Case IH L160 loader with lift capacity to full height of 2000 lbs (907 kg).

Engine
Engine Model Shibaura N844L
Engine Type 4-Stroke, vertical 4-cylinder diesel
Number of Cylinders 4
Displacement, cu in (L) 135.2 (2.2)
Engine Bore, in (mm) 3.31 (84.0)
Engine Stroke, in (mm) 3.94 (100.0)
Rated Engine Power, hp (kW) 45.0 (33.6)
Rated Engine Speed, rpm 2600
Low Idle Speed, rpm 1025
Compression Ratio 22.5:1
Firing Order 1-3-4-2
Fuel Pump Type In-Line
Fuel Tank Capacity, gal (L) 13.0 (49.5)
Oil Capacity, qts (L) 6.3 (6.0)
Coolant Capacity, qts (L) 8.4 (8.0)
Electrical System Rating, Volts 12
Charging System Alternator
Alternator Rating, Amps 40

Power Take-Off
PTO Horsepower, hp (kW) 37.8 (28.2)
Rear PTO Operational Type Independent
Rear PTO Speed, rpm 540
Mid PTO Optional
Mid PTO Speed, rpm 2000

Transmission
Transmission Type Hydrostatic (HST)
Number of Forward Gears 2 Ranges (Hi-Lo)
Number of Reverse Gears 2 Ranges (Hi-Lo)
Pump Displacement, cu in (L) 1.71 (0.03)
Motor Displacement (High), cu in (L) 1.34 (0.02)
Motor Displacement (Low), cu in (L) 2.27 (0.04)
Motor Hi-Lo Speed Shift Electric Switch
Maximum Forward Speed, mph (kph) 13.6 (21.9)
Maximum Reverse Speed, mph (kph) 13.6 (21.9)

Wheels and Tires
Drive Wheels 4WD 4x4
Steering Configuration Front steer
Steering System Hydrostatic power
Brakes Type Mechanical wet disc
Front Tire Size (Std) 8.00x16
Rear Tire Size (Std) 14.9x24
Front Tire Size (Turf) 27x8.50-15
Rear Tire Size (Turf) 44x18.0-20
Front Tread, in (mm) 46.4 (1170)
Rear Tread, in (mm) 47.1-67.4 (1190-1710)

Hydraulic System
Hydraulic System Type Open center
Implement Pump Flow, gpm (Lpm) 9.8 (37.1)
Steering Pump Flow, gpm (Lpm) 5.1 (19.3)
Number of Standard Remote Valves 1/2
3-Point Hitch Category 1
Draft Sensing or Lift Control Position control
Standard Lift Capacity 24-in (610mm) behind pin, lb (kg) 2025 (920)

Dimensions and Weight
Wheelbase, in (mm) 73.5 (1860)
Length, in (mm) 116.3 (2950)
Overall Width, in (mm) 94.5 (2400)
Weight, lb (kg) 3417 (1550)

Front End Loader
Loader Model L160
Lift Capacity Full Height, lbs (kg) 2000 (907)
Breakout Force (Lift), lbs (kg) 3540 (1605)
Maximum Height (To Pin), in (mm) 105 (2660)
Maximum Clearance at Full Height, in (mm) 81.5 (2070)
Reach at Maximum Height, in (mm) 33 (830)
Dump Angle, deg 58
Rollback Angle, deg 30
Loader Weight, lbs (kg) 1100 (500)

84" Mower Deck
Mower Model MWX84R
Mower Deck Type Mid-mounted, direct drive finishing mower
Discharge Rear
Number of Blades 4
Blade Type Mulcher blades
Blade Length, in (mm) 22.8 (580)
Blade Width, in (mm) 3 (76)
Cutting Width, in (mm) 84 (2134)
Cutting Height, in (mm) 2.0-4.0 (51-102)
Drive Type Mid PTO
Gauge Wheels Size, in (mm) 6x2.5 (152x64)
Overall Width, in (mm) 87.4 (2220)
Weight, lbs (kg) 515 (234)

________________________________________________________________________________________

________________________________________________________________________________________

Farm Tractors Technical Specifications
JD 1026R JD 3650 JD 6400 JD 7810
KUBOTA B7500 KUBOTA L245 KUBOTA L2250 KUBOTA M4072
FORD 1320 FORD 2810 FORD 3930 FORD 5600
MF 250 MF 690 MF 3060 MF 6180
NH TC48DA NH M100 NH T7550 NH 8560
CASE IH 495 CASE IH 1255XL CASE IH 2140 CASE IH 2294