Home / Farm Tractors / Case IH Tractors / Case IH JXU105

Case IH JXU105 Tractor

The Case IH JXU 105 is a four-wheel drive farm tractor. The components of Case IH JXU105 powerline system: A 274 (4.5 L) cubic inches CNH NEF F4C 4-stroke 6-cylinder in-line turbocharged intercooled diesel engine with power rating of 104.6 Hp (78 kW), and 24x24 two-speed powershift transmission, or 20x12 mechanical shuttle transmission with creeper.

Max. forward speed - 24.9 mph (40 km/h). The open center hydraulic system used a gear pump with a flow of 16.2 gpm (61.1 lpm) or 21.1 gpm (80 lpm). The hydraulic system pressure is 2875 psi (198 bar).

The rear lift capacity is 10780 lb (4900 kg) at lift pin. The Case IH JXU105 is equipped with a hydrostatic power system, hydraulic disc brakes, 380/70R24 front tires, and 480/70R34 rear tires. The wheel base is 92.5 inches (2350 mm).

Engine Model CNH NEF F4C
Engine Type 4 stroke, turbocharged intercooled diesel
Number of Cylinders 4, In-line
Displacement, cu in (L) 274,0 (4,49)
Engine Bore, in (mm) 4,09 (104,0)
Engine Stroke, in (mm) 5,20 (132,0)
Rated Engine Power, hp (kW) 104,6 (78,0)
Rated Engine Speed, rpm 2300
Torque Speed, rpm 1300
Maximum Torque, Nm (ft-lbs) 425 (314,5)
Torque Rise 31%
Aspiration Turbocharged
Intercooled Air to air cooled
Emission Level Tier 3
Fuel System Direct injection
Fuel Tank Capacity, gal (L) 44,1 (167,0)
Electrical System Rating, Volts 12

Power Take-Off
PTO Operational Type Independent
PTO Clutch Electro-hydraulic
PTO Horsepower, hp (kW) 90,0 (66,7)
Rear PTO Speeds, rpm 540/540E/1000
Front PTO Speeds (Optional), rpm 1000

Standard Transmission
Transmission Type 24F/24R, 2-Speed powershift
Number of Forward Gears 24
Number of Reverse Gears 24
Maximum Speed (Forward), mph (kph) 24,9 (40,0)

Optional Transmission
Transmission Type 20F/12R Mechanical shuttle with creeper
Number of Forward Gears 20
Number of Reverse Gears 12
Maximum Speed (Forward), mph (kph) 24,9 (40,0)

Wheels and Tires
Drive Wheels 4WD 4x4
Steering Configuration Front Steer
Steering System Hydrostatic power
Service Brake Hydraulic disc
Front Tire Size 380/70 R24
Rear Tire Size 480/70 R34

Hydraulic System
Hydraulic System Type Open center
Implement Pump Flow (Std), gpm (Lpm) 16,2 (61,1)
Implement Pump Flow (Opt), gpm (Lpm) 21,1 (80,0)
Hydraulic Pressure, Bar (psi) 198 (2875)
Number of Standard Remote Valves 3
3-Point Hitch Category 2
Draft Sensing or Lift Control Electronic lower-link
Standard Lift Capacity at lift pin, lb (kg) 10780 (4900)
Standard Lift Capacity 24-in behind pin, lb (kg) 5500 (2500)

Dimensions and Weight
Wheelbase, in (mm) 92,5 (2350)
Length, in (mm) 162 (4110)
Overall Width, in (mm) 71,2 (1800)
Height, in (mm) 103 (2620)
Turning Radius, in (mm) 159 (4050)
Weight (Shipping), lb (kg) 8570 (3890)
Weight (Operating), lb (kg) 9350 (4250)
Weight (Maximum), lb (kg) 14960 (6800)



Farm Tractors Technical Specifications
JD 1026R JD 3650 JD 6400 JD 7810
FORD 1320 FORD 2810 FORD 3930 FORD 5600
MF 250 MF 690 MF 3060 MF 6180
NH TC48DA NH M100 NH T7550 NH 8560
CASE IH 495 CASE IH 1255XL CASE IH 2140 CASE IH 2294