________________________________________________________________________________________

Home / Farm Tractors / Case IH Tractors / Case IH MX100C

Case IH MX100C Specifications

The Case IH MX100C is a 4-wheel drive utility tractor. This model was manufactured from 1998 to 2002. The Case IH MX100C tractor is powered by 244 cu.in (4 L) Perkins 1004-4T 3-cylinder direct injection turbocharged diesel engine with a rated power of 102 hp (76.1 kW).

The Case IH MX100C is fitted with a two transmission options: powershift transmission with 16 forward and 12 reverse gears, or creeper transmission with 32 forward and 24 reverse gears. The maximum travel speed (forward/reverse): 23 mph (37 km/h) and 13.7 mph (22 km/h).

The PFC closed center hydraulic system has a piston pump with a rated capacity of 25 gpm (94.6 lpm). The hydraulic system pressure is 203 bar (2950 psi). The tractor is equipped with a hydrostatic power steering system, differential hydraulic wet disc brakes, 14.9x24 front tyres, and 16.9x38 rear tyres. The wheelbase is 95.4" (2420 mm).

Engine
Engine Model Perkins 1004-4T
Engine Type 4-stroke, direct injection, turbocharged diesel
Number of Cylinders 4
Displacement, cu in (L) 243,5 (4,0)
Engine Bore, in (mm) 3,94 (100,0)
Engine Stroke, in (mm) 5,00 (127,0)
Aspiration Turbocharged
Rated Engine Power, hp (kW) 102,0 (76,1)
Rated Engine Speed, rpm 2200
Maximum Torque, Nm (ft-lbs) 405 (299,7)
Torque Speed, rpm 1400
Compression 17.25:1
Firing Order 1-3-4-2
Fuel System Direct injection
Governor Mechanical
Fuel Tank Capacity, gal (L) 50,0 (190,0)
Oil Capacity, qts (L) 9,3 (8,8)
Coolant Capacity, qts (L) 16,6 (15,7)
Electrical System Rating, Volts 12
Alternator Rating, Amps 95

Power Take-Off
PTO Operational Type Independent
PTO Clutch Electrically-actuated wet disc
PTO Horsepower, hp (kW) 83,0 (61,9)
PTO Speeds, rpm 540/1000
PTO / Engine Speeds, rpm 540/1875, 1000/2210

Standard Transmission
Transmission Type Power shift
Gearbox Type 16F/12R, Partial powershift
Number of Forward Gears 16
Number of Reverse Gears 12
Clutch Type Hydraulic wet discs
Maximum Forward Speed, mph (kph) 23,0 (37,0)
Maximum Reverse Speed, mph (kph) 13,7 (22,2)

Optional Transmission
Transmission Type Powershift with creeper
Gearbox Type 32F/24R, Partial powershift with creeper
Number of Forward Gears 32
Number of Reverse Gears 24
Clutch Type Hydraulic wet discs
Maximum Forward Speed, mph (kph) 23,0 (37,0)
Maximum Reverse Speed, mph (kph) 13,7 (22,2)

Wheels and Tires
Drive Wheels 4WD 4x4
Steering Configuration Front Steer
Steering System Hydrostatic power
Service Brake Differential hydraulic wet disc
Front Tire Size 14.9-24
Rear Tire Size 16.9-38

Hydraulic System
Hydraulic System Type PFC (Closed center pressure flow compensated)
Implement Pump Flow, gpm (Lpm) 25,0 (94,6)
Hydraulic Pressure, Bar (psi) 203 (2950)
Hydraulic Capacity, gal (L) 17,5 (66,2)
Number of Standard Remote Valves 2/4
3-Point Hitch Category 2
Draft Sensing or Lift Control Electronic lower-link
Standard Lift Capacity 24-in behind pin, lb (kg) 8390 (3810)
Standard Lift Capacity at lift pin, lb (kg) 12910 (5870)

Dimensions and Weight
Wheelbase, in (mm) 95,4 (2420)
Length, in (mm) 170,6 (4330)
Height, in (mm) 110,3 (2800)
Turning Radius, in (mm) 169 (4300)
Weight (Shipping), lb (kg) 10450 (4750)
Weight (Operating), lb (kg) 11180 (5080)

________________________________________________________________________________________

________________________________________________________________________________________

Farm Tractors Technical Specifications
JD 1026R JD 3650 JD 6400 JD 7810
KUBOTA B7500 KUBOTA L245 KUBOTA L2250 KUBOTA M4072
FORD 1320 FORD 2810 FORD 3930 FORD 5600
MF 250 MF 690 MF 3060 MF 6180
NH TC48DA NH M100 NH T7550 NH 8560
CASE IH 495 CASE IH 1255XL CASE IH 2140 CASE IH 2294