Home / Farm Tractors / Case IH Tractors / Case IH MX120

Case IH MX-120 Specifications

The Case IH MX120 farm tractor was manufactured between 1997 and 2002. The Case IH MX 120 tractor is powered by 359 cu.in (5.9 L) Cummins B6T-590 six-cylinder turbocharged diesel engine with a rated power of 120 hp (89.5 kW).

The Case IH MX120 Maxxum is fitted with a 2 types of transmission. Type 1: 16x12 synchromesh transmission. Type 2: 20x12 (32x24 with creeper) partial powershift transmission. The maximum travel speed (forward/reverse): 23 mph (37 kph) and 13.7 mph (22.2 kph). The closed center pressure flow compensated hydraulic system has a pump with a rated capacity of 25 gpm (94.6 lpm).

The hydraulic system pressure is 203 bar (2950 psi). The 2WD models are equipped with 11.00x16 front tires and 18.4-R38 rear tires. The 480/70R26 front tires and 520/70R38 rear tires are used for 4WD tractors. The tractor is compatible with a Case IH L300 front loader with lift capacity to maximum height of 3850 lbs (1746 kg) and breakout force of 4900 lbs (2222 kg).

Engine Model Cummins B6T-590
Engine Type 4-stroke, direct injection, turbocharged diesel
Number of Cylinders 6
Displacement, cu in (L) 359 (5,90)
Engine Bore, in (mm) 4,02 (102,0)
Engine Stroke, in (mm) 4,72 (120,0)
Aspiration Turbocharged
Rated Engine Power, hp (kW) 120,0 (89,5)
Rated Engine Speed, rpm 2000
Maximum Torque, Nm (ft-lbs) 525 (388,5)
Torque Speed, rpm 1000
Compression 17.5:1
Fuel System Direct injection
Governor Mechanical
Fuel Tank Capacity, gal (L) 72,0 (273,0)
Oil Capacity, qts (L) 15,8 (15,0)
Coolant Capacity, qts (L) 19,5 (18,6)
Electrical System Rating, Volts 12
Alternator Rating, Amps 65

Power Take-Off
PTO Operational Type Independent
PTO Horsepower, hp (kW) 105,0 (78,3)
PTO Speeds, rpm 540/1000

Standard Transmission
Transmission Type Synchromesh
Gearbox Type 16F/12R
Number of Forward Gears 16
Number of Reverse Gears 12
Clutch Type Hydraulic wet discs
Maximum Forward Speed, mph (kph) 23,0 (37,0)
Maximum Reverse Speed, mph (kph) 13,7 (22,2)

Optional Transmission
Transmission Type Powershift with creeper
Gearbox Type 20F/12R (32F/24R), Partial powershift with creeper
Number of Forward Gears 20 (32 with creeper)
Number of Reverse Gears 12 (24 with creeper)
Clutch Type Hydraulic wet discs
Maximum Forward Speed, mph (kph) 23,0 (37,0)
Maximum Reverse Speed, mph (kph) 13,7 (22,2)

Wheels and Tires
Drive Wheels 2WD/4WD
Steering Configuration Front Steer
Steering System Hydrostatic power
Service Brake Wet disc
Front Tire Size 11.00-16
Rear Tire Size 18.4-R38

Hydraulic System
Hydraulic System Type PFC (Closed center pressure flow compensated)
Implement Pump Flow, gpm (Lpm) 25,0 (94,6)
Hydraulic Pressure, Bar (psi) 203 (2950)
Hydraulic Capacity, gal (L) 17,5 (66,2)
Number of Standard Remote Valves 2/4
3-Point Hitch Category 2/3N
Draft Sensing or Lift Control Electronic lower-link
Standard Lift Capacity 24-in behind pin, lb (kg) 8390 (3810)
Optional Lift Capacity 24-in behind pin, lb (kg) 9720 (4410)
Standard Lift Capacity at lift pin, lb (kg) 12900 (5870)

Dimensions and Weight
Wheelbase (2WD), in (mm) 110,7 (2810)
Wheelbase (4WD), in (mm) 106,3 (2700)
Length, in (mm) 197,7 (5020)
Height, in (mm) 114,7 (2910)
Ground Clearance (2WD), in (mm) 23,8 (600)
Ground Clearance (4WD), in (mm) 24,6 (620)
Front Tread, in (mm) 60-88 (1520-2230)
Rear Tread, in (mm) 60-88 (1520-2230)
Turning Radius, in (mm) 183 (4650)
Weight (2WD), lb (kg) 11300 (5130)
Weight (4WD), lb (kg) 12460 (5650)



Farm Tractors Technical Specifications
JD 1026R JD 3650 JD 6400 JD 7810
FORD 1320 FORD 2810 FORD 3930 FORD 5600
MF 250 MF 690 MF 3060 MF 6180
NH TC48DA NH M100 NH T7550 NH 8560
CASE IH 495 CASE IH 1255XL CASE IH 2140 CASE IH 2294