________________________________________________________________________________________

Home / Farm Tractors / John Deere Tractors / JD 1450

John Deere 1450 Tractor

The John Deere 1450 is a two-wheel drive or four-wheel drive utility tractor. This model was manufactured from 1984 to 1988. The John Deere 1450 tractor is equipped with a 190.3 cubic inches (3.1 L) Yanmar 4T95 4-cylinder direct injection naturally aspirated diesel engine with a rated power of 55 hp (41 kW) at 2400 rpm.

The sliding gear transmission includes a dry clutch and gearbox with 9 forward and 3 reverse gears. The maximum travel speed (forward/reverse): 16 mph (25.7 kph) and 8.2 mph (13.3 kph). The open center hydraulic system used a gear pump with a rated fluid flow of 10.7 gpm (40.5 lpm).

The John Deere 1450 is equipped with a power assist steering system, differential hydraulic wet disc brakes, 6.50x16 front tires, and 14.9x28 rear tires. The wheel base is 82.8" (2100 mm). The tractor is compatible with John Deere 100 front end loader with a max lift height of 109 in (2760 mm) and lift capacity to max height of 1760 lbs (798 kg) at pin.

Engine
Engine Model Yanmar 4T95
Engine Type 4 cycle, 4-cylinder direct injection diesel
Number of Cylinders Four
Displacement, cu in (L) 190.3 (3.1)
Engine Bore, in (mm) 3.74 (95.0)
Engine Stroke, in (mm) 4.33 (110.0)
Aspiration Natural
Rated Engine Power, hp (kW) 55.0 (41.0)
Rated Engine Speed, rpm 2400
Compression 18:1
Firing Order 1-3-4-2
Fuel system Direct injection
Air Cleaner Dry type
Fuel Tank Capacity, gal (L) 21.1 (80.0)
Oil Capacity, qts (L) 12.7 (12.0)
Coolant Capacity, qts (L) 11.1 (10.5)
Electrical System Rating, Volts 12
Charging System Alternator
Alternator Rating, Amps 25

Power Take-Off
PTO Operational Type Independent
PTO Horsepower, hp (kW) 50.0 (37.3)
PTO Speed, rpm 540

Transmission
Transmission Type Sliding gear
Gearbox Type 9F/3R
Number of Forward Gears 9
Number of Reverse Gears 3
Maximum Forward Speed, mph (kph) 16.0 (25.7)
Maximum Reverse Speed, mph (kph) 8.2 (13.3)


Wheels and Tires
Drive Wheels 2WD/4WD
Steering Configuration Front Steer
Steering System Power assist
Service Brake Differential hydraulic wet disc
Front Tire Size 6.50x16
Rear Tire Size 14.9x28
Front Tread, in (mm) 49.6-74.8 (1250-1890)
Rear Tread, in (mm) 51-79 (1290-2000)

Hydraulic System
Hydraulic System Type Open center
Implement Pump Type Gear
Implement Pump Flow, gpm (Lpm) 10.7 (40.5)
Steering Pump Flow, gpm (Lpm) 4.7 (17.8)
Number of Standard Remote Valves 0/2
3-Point Hitch Category 2/1
Draft Sensing or Lift Control Center link draft sensing with position and control
Standard Lift Capacity, 24" (600 mm) behind pin, lb (kg) 2650 (1200)

Dimensions and Weight
Wheelbase, in (mm) 82.8 (2100)
Length, in (mm) 136 (3440)
Height (Hood), in (mm) 56.1 (1420)
Overall Width, in (mm) 65.2 (1650)
Ground Clearance, in (mm) 17.5 (440)
Shipping Weight (2WD), lb (kg) 4410 (2000)
Shipping Weight (4WD), lb (kg) 5070 (2300)
Operating Weight, lb (kg) 5230 (2370)
Ballasted Weight, lb (kg) 6570 (2980)

________________________________________________________________________________________

________________________________________________________________________________________

________________________________________________________________________________________

Farm Tractors Technical Specifications
JD 1026R JD 3650 JD 6400 JD 7810
KUBOTA B7500 KUBOTA L245 KUBOTA L2250 KUBOTA M4072
FORD 1320 FORD 2810 FORD 3930 FORD 5600
MF 250 MF 690 MF 3060 MF 6180
NH TC48DA NH M100 NH T7550 NH 8560
CASE IH 495 CASE IH 1255XL CASE IH 2140 CASE IH 2294