________________________________________________________________________________________

Home / Farm Tractors / John Deere Tractors / JD 2025R

John Deere 2025R Tractor

The John Deere 2025R is a four wheel drive compact utility tractor from 2R series. This model was manufactured between 2013 and 2021. The John Deere 2025R driveline includes a 77.2 cu.in (1.3L) Yanmar 3TNV80F 4-cycle vertical in-line 3-cylinder indirect injection naturally aspirated water-cooled diesel engine with a max power of 25 hp (18.6 kW), and 2-range hydrostatic transmission with infinite forward and reverse gears.

The engine has an in-line type fuel injection pump, forced lubrication with trochoid pump, liquid-cooled with radiator, and dry type air cleaner. Max forward speed - 12.3 mph (19.8 km/h), maximum reverse speed - 11.4 mph (18.2 km/h). The open center hydraulic system includes a gear pump with rated capacity of 3.4 gpm (13 lpm). The hydraulic system pressure is 167 bar (2420 psi). The John Deere 2025R is equipped with a hydrostatic power steering, wet disc brakes, 23x8.50-12 front tires, and 31x12.00-16.5 rear tires. The wheelbase is 63" (1600 mm).

The tractor is compatible with 54", 60", 62" mid-mount 3-blade AutoConnect mower decks with hydraulic lift system, 47" or 54" front-mount two-stage snowblowers, 54" or 60" front-mount blade, John Deere 120R front-end loader with lift capacity to full height of 754 lbs (342 kg), and John Deere 270B backhoe with maximum digging depth of 84" (2130 mm).

Engine
Engine Model Yanmar 3TNV80F
Engine Type Vertical in-line 4-cycle 3-cylinder water-cooled diesel
Number of Cylinders 3
Displacement, cu.in (L) 77.2 (1.266)
Engine Bore, in (mm) 3.15 (80.0)
Piston Stroke, in (mm) 3.31 (84.0)
Maximum Engine Power, hp (kW) 25.0 (18.6)
Maximum Engine Speed, rpm 3000
High Idle Speed, rpm 3260
Low Idle Speed, rpm 1250
Aspiration Naturally aspirated
Compression Ratio 23.1:1
Firing Order 1-3-2
Direction of Rotation Counterclockwise (viewed from flywheel side)
Fuel System Indirect injection
Fuel Injection Pump In-line type
Fuel Filter Replaceable element
Lubricating System Forced lubrication with trochoid pump
Oil Filter Type Spin on
Cooling System Liquid-cooled with radiator
Air Cleaner Dry type
Emissions Level Interim Tier 4
Fuel Tank Capacity, gal (L) 6.1 (23.1)
Engine Oil Capacity, qts (L) 3.6 (3.4)
Coolant Capacity, qts (L) 3.9 (3.7)
Electrical System Rating, Volts 12
Charging System Alternator
Alternator Rating, Amps 40

Power Take-Off
PTO Operational Type Independent
PTO Horsepower, hp (kW) 18.0 (13.5)
PTO Clutch Wet disc
Rear PTO Speed, rpm 540
Rear PTO / Engine Speed, rpm 540/3000
Mid PTO Speed, rpm 2100
Mid PTO / Engine Speed, rpm 2100/3000
Front PTO Speed, rpm 2000
Front PTO / Engine Speed, rpm 2000/3000

Transmission
Transmission Type Hydrostatic
Number of Forward Gears Infinite (2-range)
Number of Reverse Gears Infinite (2-range)
Oil Capacity, qts (L) 13.9 (13.1)
Maximum Forward Speed (Low), mph (kph) 4.7 (7.6)
Maximum Reverse Speed (High), mph (kph) 12.3 (19.8)
Maximum Forward Speed (Low), mph (kph) 4.7 (7.6)
Maximum Reverse Speed (High), mph (kph) 11.4 (18.2)

Wheels and Tires
Drive Wheels 4WD 4x4
Steering Configuration Front steer
Steering System Power steering
Brakes Type Wet disc
Front Tire Size 23x8.50-12
Rear Tire Size 31x12.00-16.5
Front Tread, in (mm) 31.1 (780)
Rear Tread, in (mm) 35.2 (890)


Hydraulic System
Hydraulic System Type Open center
Implement Pump Flow, gpm (Lpm) 3.4 (13.0)
Steering Pump Flow, gpm (Lpm) 2.2 (8.4)
Hydraulic Pressure, Bar (psi) 167 (2420)
Hydraulic Fluid Capacity, gal (L) 2.6 (10.0)
Number of Standard Remote Valves 2/3
3-Point Hitch Category 1 (limited)
Draft Sensing or Lift Control Position control
Standard Lift Capacity at 24" (610mm) behind pin, lb (kg) 880 (400)
Standard Lift Capacity at pin, lb (kg) 1435 (650)

Dimensions and Weight
Wheelbase, in (mm) 63 (1600)
Length, in (mm) 109.2 (2770)
Height (Hood), in (mm) 47.2 (1190)
Height (ROPS), in (mm) 89 (2260)
Overall Width, in (mm) 51 (1290)
Ground Clearance, in (mm) 12.5 (310)
Weight, lb (kg) 1660 (752)

Front End Loader
Loader Model John Deere 120R
Maximum Lift Height (at Pin), in (mm) 72 (1825)
Reach at Max Height, in (mm) 24.7 (620)
Dump Angle, deg 40.5
Rollback Angle, deg 30
Lift Capacity to Max Height (at Pin), lb (kg) 755 (342)
Lift Capacity to Max Height (at 0.5m ahead Pin), lb (kg) 520 (235)
Breakout Force (at Pin), lb (kg) 1823 (826)
Bucket Width, in (mm) 49 (1235), 53 (1340)
Loader Weight, lb (kg) 625 (284)

Backhoe
Backhoe Model John Deere 270B
Max Digging Depth, in (mm) 84 (2130)
Reach from Swing Pivot, in (mm) 117 (2970)
Loading height, in (mm) 73 (1855)
Swing arc, degrees 150
Bucket Digging Force, lb (kg) 2474 (1125)
Dipperstick Digging Force, lb (kg) 1502 (683)
Backhoe Weight, lb (kg) 773 (350)

54" Mower Deck
Mower Deck Model 54D AutoConnect
Mower Deck Type Mid-mount
Number of Blades 3
Cutting Width, in (mm) 54 (1370)
Lift System Hydraulic
Weight, lb (kg) 370 (167)

62" Mower Deck
Mower Deck Model 62D AutoConnect
Mower Deck Type Mid-mount
Number of Blades 3
Cutting Width, in (mm) 62 (1570)
Lift System Hydraulic
Weight, lb (kg) 422 (190)

60" Front Blade
Blade Type Front-mount
Width, in (mm) 60 (1520)
Lift System Hydraulic
Angle Hydraulic
Weight, lb (kg) 218 (99)

________________________________________________________________________________________

________________________________________________________________________________________

________________________________________________________________________________________

Farm Tractors Technical Specifications
JD 1026R JD 3650 JD 6400 JD 7810
KUBOTA B7500 KUBOTA L245 KUBOTA L2250 KUBOTA M4072
FORD 1320 FORD 2810 FORD 3930 FORD 5600
MF 250 MF 690 MF 3060 MF 6180
NH TC48DA NH M100 NH T7550 NH 8560
CASE IH 495 CASE IH 1255XL CASE IH 2140 CASE IH 2294