________________________________________________________________________________________
John Deere 2038R Tractor
The
John Deere 2038R is a 4-wheel drive compact utility tractor from 2R-series. This
model was manufactured between 2017 and 2021. The components of John Deere 2038R
driveline system: a 95.8 cu.in (1.6L) Yanmar 3TNV86CT-NJT2 4-cycle 3-cylinder
direct injection turbocharged liquid-cooled diesel engine and 2-range
hydrostatic transmission with infinite forward and reverse gears.
The engine has a cylinder bore of 3.38" (86 mm), piston stroke of 3.54"
(90 mm), maximum power of 36.8 hp (27.7 kW), and 127 Nm (93.7 lb-ft) of
peak torque at 1625 rpm. The maximum travel speed (forward and reverse):
15.4 mph (24.7 kph) / 13.8 mph (22 kph). The open center hydraulic
system includes a gear pump with a rated capacity of 5.3 gallons per
minute (20.2 liters per minute). The main relief pressure is 172 bar
(2500 psi).
The John Deere 2038R is equipped with a power steering system, wet disc
brakes, 7.00x12 (AG) or 200/60R15 (Turf) front tires, and 12.4x16 (AG)
or 300/70R20 (Turf) rear tires. The wheelbase is 67.8" (1725 mm).
Compatible attachments for the tractor: 60" or 72" mid-mount 3-blade
mower decks with hydraulic lift system, John Deere 220R front-end loader
with lift capacity to full height of 1120 lbs (508 kg), and John Deere
270B backhoe with maximum digging depth of 84" (2130 mm).
| Engine Model |
Yanmar 3TNV86CT-NJT2 |
| Engine Type |
4-Cycle 3-cylinder turbocharged liquid-cooled diesel |
| Number of Cylinders |
Three |
| Displacement, cu in (L) |
95.8 (1.57) |
| Engine Bore, in (mm) |
3.38 (86.0) |
| Engine Stroke, in (mm) |
3.54 (90.0) |
| Aspiration |
Turbocharged |
| Maximum Engine Power, hp (kW) |
36.8 (27.7) |
| Rated Engine Speed, rpm |
2500 |
| Low Idle Speed |
950 rpm |
| High Idle Speed |
2650 rpm |
| Maximum Torque, Nm (ft-lbs) |
127 (93.7) |
| Torque Speed, rpm |
1625 |
| Compression Ratio |
19.1:1 |
| Firing Order |
1-3-2 |
| Fuel System |
Direct injection |
| Lubrication System |
Forced lubrication with trochoid pump |
| Oil Filter Type |
Single element |
| Air Cleaner |
Dual dry element |
| Emission Level |
Tier 4 |
| Fuel Tank Capacity, gal (L) |
8.5 (32.3) |
| Oil Capacity, qts (L) |
4.8 (4.5) |
| Coolant Capacity, qts (L) |
5.5 (5.2) |
| Electrical System Rating, Volts |
12 |
| Charging System |
Alternator |
| Alternator Rating, Amps |
85 |
| PTO Operational Type |
Independent |
| PTO Horsepower, hp (kW) |
30.4 (22.7) |
| PTO Clutch |
Wet disc |
| Rear PTO Speed, rpm |
540 |
| Mid PTO Speed, rpm |
2100 |
| Transmission Type |
Hydrostatic |
| Number of Forward Gears |
Infinite (2-range) |
| Number of Reverse Gears |
Infinite (2-range) |
| Cruise Control |
Standard |
| Oil Capacity, qts (L) |
24.8 (23.5) |
| Maximum Forward Speed, mph (kph) |
15.4 (24.7) |
| Maximum Reverse Speed, mph (kph) |
13.8 (22.0) |
| Drive Wheels |
4WD 4x4 |
| Steering Configuration |
Front steer |
| Steering System |
Power Steering |
| Brakes Type |
Wet disc |
| Front Tire Size (AG) |
7.00x12 |
| Rear Tire Size (AG) |
12.4x16 |
| Front Tire Size (Turf) |
200/60R15 |
| Rear Tire Size (Turf) |
300/70R20 |
| Front Tire Size (Industrial) |
23x8.50-14 |
| Rear Tire Size (Industrial) |
14-17.5 |
| Hydraulic System Type |
Open center |
| Implement Pump Type |
Tandem gear |
| Implement Pump Flow, gpm (Lpm) |
5.3 (20.2) |
| Steering Pump Flow, gpm (Lpm) |
4.0 (15.0) |
| Hydraulic Pressure, Bar (psi) |
172 (2500) |
| Hydraulic Fluid Capacity, gal (L) |
5.2 (23.5) |
| Number of Standard Remote Valves |
0/3 |
| 3-Point Hitch Category |
1 |
| Draft Sensing or Lift Control |
Position control |
| Standard Lift Capacity at 24" (610mm) behind pin, lb (kg) |
2086 (945) |
| Standard Lift Capacity at pin, lb (kg) |
1488 (675) |
| Wheelbase, in (mm) |
67.8 (1725) |
| Overall Length, in (mm) |
117.5 (2990) |
| Height (Hood), in (mm) |
50.4 (1280) |
| Height (Cab), in (mm) |
88 (2235) |
| Height (ROPS), in (mm) |
92.3 (2345) |
| Overall Width, in (mm) |
55.1 (1400) |
| Ground Clearance, in (mm) |
9.8 (250) |
| Turning Radius (with Brakes), in (mm) |
84.6 (2150) |
| Turning Radius (w/o Brakes), in (mm) |
98.4 (2500) |
| Weight (ROPS), lb (kg) |
2435 (1105) |
| Weight (Cab), lb (kg) |
2885 (1310) |
| Loader Model |
John Deere 220R |
| Maximum Lift Height at Pin, in (mm) |
85 (2150) |
| Maximum Lift Height Under Level Bucket, in (mm) |
79 (2000) |
| Clearance with Bucket Fully Dumped, in (mm) |
66 (1670) |
| Reach at Maximum Height, in (mm) |
30 (760) |
| Maximum Dump Angle, deg |
36 |
| Reach with Bucket on Ground, in (mm) |
51 (1290) |
| Maximum Rollback Angle, deg |
20 |
| Lift Capacity to Max Height at Pin, lbs (kg) |
1120 (510) |
| Lift Capacity to Max Height at 19.7" (0.5m) Ahead of Pin, lbs (kg) |
805 (365) |
| Breakout Force at Pivot Pin, lbs (kg) |
1950 (885) |
| Breakout Force at 19.7" (0.5m) Ahead of Pin, lbs (kg) |
1360 (615) |
| Rollback Force at Max Height, lbs (kg) |
2140 (970) |
| Bucket Widths, in (mm) |
49 (1240) or 53 (1340) |
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
| Farm Tractors Technical Specifications |
