________________________________________________________________________________________
John Deere 3010 Maintenance
The
John Deere 3010 is a 2WD utility or row crop tractor from New Generation Series.
This model was manufactured between 1961 and 1963. The John Deere 3010 powerline
components: JD 4 cycle 4-cyl. diesel or gasoline engine, and Syncro Range
partially synchronized transmission with 8 forward and 3 reverse gears.
A 254 cubic inches (4.20 L)
diesel engine power rating is 61 hp (45.2 kW) at
2200 rpm.
A 201 cubic inches (3.3 L) gasoline engine power rating is 55 hp (40.7
kW) at 2200 rpm.
The maximum travel speed (forward and reverse): 14.5 mph (23.3
km/h) km/h / 8.5 mph (13.7 km/h). The closed center hydraulic system used
a piston pump.
The main relief pressure is 155 bar (2250 psi). The JD 3010 tractor was
equipped with 6.0x14 (utility) or 9.0x18 (row crop) front tires and
13.6x28 (utility) or 13.6x30 (row crop) rear tires. The wheelbase is 90"
(2280 mm). The John Deere 3010 is compatible with a 48 front end loader.
The loader has a lift capacity to full height of 2400 lbs (1088 kg) and
breakout force of 3600 lbs (1630 kg).
| Engine oil capacity, gal (L) |
2.1 (7.6) |
| Engine coolant capacity, gal (L) |
4.0 (15.0) |
| Hydraulic/Transmission system capacity, gal (L) |
9.5 (36.0) |
| Belt pulley oil capacity, qts (L) |
1.3 (1.2) |
| Recommended Oil and Fluid |
| Engine oil type |
Torq-Gard, SAE 10W-30, 5W-20, 20W-40. API Service category DS |
| Engine coolant type |
Cool-Gard Premix Coolant |
| Hydraulic/Transmission fluid type |
JD 303 Special-Purpose Oil |
| Belt pulley oil type |
JD 303 Special-Purpose Oil |
| Check hydraulic/transmission fluid level |
Every 50 hours |
| Lubricate axle hub bearings |
Every 50 hours |
| Change engine oil |
Every 200 hours |
| Replace engine oil filter |
Every 200 hours |
| Inspect and adjust generator belt |
Every 200 hours |
| Check belt pulley oil level |
Every 200 hours |
| Clean air cleaner oil cap |
Every 200 hours |
| Clean battery and check electrolyte level |
Every 200 hours |
| Change engine fuel filter (diesel) |
Every 600 hours |
| Clean carburetor strainer screen (gasoline) |
Every 600 hours |
| Check injection timing (diesel) |
Every 600 hours |
| Clean or replace spark plug (gasoline) |
Every 600 hours |
| Replace hydraulic oil filter |
Every 600 hours |
| Change belt pulley oil |
Every 600 hours |
| Check and adjust engine idling |
Every 600 hours |
| Check and adjust valve clearance |
Every 600 hours |
| Change hydraulic/transmission fluid |
Every 1200 hours |
| Clean and adjust wheel bearings |
Every 1200 hours |
| Flush cooling system and add new coolant |
Every 1500 hours |
| Engine oil filter part number |
AR26350 |
| Engine fuel filter part number |
AR44077 |
| Engine air cleaner part number |
AR27281 (diesel), AR27280 (gasoline) |
| Hydraulic/transmission oil filter part number |
AR75603, R27173 |
| Hydraulic/transmission filter seal part number |
R39596 |
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
| Farm Tractors Technical Specifications |
