________________________________________________________________________________________
Kubota L2501 Maintenance
The
Kubota L2501 is a compact utility tractor from L01-series. This model was
manufactured between 2014 and 2021. The tractor was designed in two versions:
L2501F (2WD) and L2501DT (4WD). The Kubota L2501 is equipped with a 100.5 cu.in
(1.65L) Kubota D1703-M-DI-E4 4-cycle vertical 3-cylinder direct injection
naturally aspirated diesel engine with a rated power of 24.8 hp (18.5 kW).
The gear transmission consists of a dry clutch and mechanical gearbox
with 8 forward and 4 reverse gears. Max. travel speed (forward and
reverse): 10.7 mph (17.3 km/h) / 3.9 mph (6.2 km/h). The open center
hydraulic system includes a gear pump with a rated capacity of 5.2 gpm
(19.5 lpm). The main relief pressure is 152 bar (2205 psi). The 2-wheel
drive models are equipped with 5.00x15 front tires and 11.2x24 rear
tires.
The 7.2x16 front tires and 11.2x24 rear tires are used for tractors with
4-wheel drive. The wheelbase is 63.3" (1610 mm). The tractor is
compatible with the following attachments:
Kubota LA525 front-end loader
with lift capacity to full height of 1131 lbs (513 kg), and Kubota BH77
backhoe with 2-ft flat digging depth of 89.8" (2280 mm).
Engine oil capacity, gal (L) |
1.5 (5.7) |
Engine coolant capacity, gal (L) |
1.6 (6.0) |
Hydraulic/transmission fluid capacity (2WD), gal (L) |
7.1 (27.0) |
Hydraulic/transmission fluid capacity (4WD), gal (L) |
7.3 (27.5) |
Front axle oil capacity, gal (L) |
1.2 (4.5) |
Recommended Oil and Fluid |
Engine oil type |
SAE 30, 10W-30, 15W-40. API Service category CF, CF-4, CG-4, CH-4, CI-4 |
Engine coolant type |
Kubota Antifreeze/Coolant |
Hydraulic/transmission fluid type |
Kubota Super UDT-2 Fluid |
Front axle oil type |
Kubota Super UDT-2, SAE 80, SAE 80W-90 Gear Oil |
Check hydraulic/transmission fluid level |
Every 50 hours |
Check front axle oil level |
Every 50 hours |
Lubricate axle hub bearings |
Every 50 hours |
Clean engine air filter element |
Every 100 hours |
Clean engine fuel filter element |
Every 100 hours |
Check battery and clean terminals |
Every 100 hours |
Inspect and adjust fan belt |
Every 100 hours |
Adjust parking and service brakes |
Every 100 hours |
Check and adjust engine idling |
Every 200 hours |
Check and adjust toe-in |
Every 200 hours |
Change engine oil |
Every 400 hours |
Replace engine oil filter |
Every 400 hours |
Replace hydraulic oil filter |
Every 400 hours |
Replace engine fuel filter |
Every 400 hours |
Change hydraulic/transmission fluid |
Every 400 hours |
Change front axle oil |
Every 800 hours |
Check power steering oil line |
Every 800 hours |
Check and adjust valve clearance |
Every 800 hours |
Replace engine air filter element |
Every 1000 hours |
Clean fuel injection nozzles |
Every 1500 hours |
Flush cooling system and add new coolant |
Every 2000 hours |
Engine oil filter part number |
HH164-32430 |
Engine fuel filter part number |
6A320-59930 (Element) |
Engine air filter part number |
TA040-93230 |
Hydraulic oil filter part number |
HH3A0-82623 |
Drive belt part number |
15469-97010 |
________________________________________________________________________________________
________________________________________________________________________________________
Farm Tractors Technical Specifications |