________________________________________________________________________________________

Home / Farm Tractors / Kubota Tractors / Kubota L2650

Kubota L2650 Tractor

The Kubota L2650 is a L50 series compact utility tractor. This model was manufactured between 1990 and 1993. The Kubota L2650 tractor is powered by Kubota D1402 vertical three-cylinder water-cooled diesel engine.

A 85.2 cubic inches (1.4 L) engine has a cylinder bore of 3.25" (85 mm), piston stroke of 3.23" (82.4 mm), and rated power of 28.5 hp (21.3 kW). The Kubota L2650 is fitted with two types of transmission. 1st type: 8x8 mechanical shuttle transmission. 2nd type: Glide shift transmission with 8 forward and 8 reverse gears. Max. travel speed (forward and reverse): 13.3 mph (21.4 kph).

The open center hydraulic system includes a gear pump with a rated fluid flow of 8.2 gpm (31 lpm). The hydraulic system pressure is 2500 psi (172 bar). The Kubota L2650 was equipped with a power steering system, wet disc brakes, 4.00-15 (2WD) or 7.00-16 (4WD) front tires, and 11.2-24 rear tires. The wheelbase is 64.6 inches (1640 mm).

Engine
Engine Model Kubota D1402
Engine Type Vertical, Water-cooled, 4 cycle diesel
Number of Cylinders 3
Displacement, cu in (L) 85.2 (1.395)
Engine Bore, in (mm) 3.25 (85.0)
Engine Stroke, in (mm) 3.23 (82.4)
Rated Engine Power, hp (kW) 28.5 (21.3)
Maximum Engine Power, hp (kW) 32.0 (23.9)
Rated Engine Speed, rpm 2800
Compression 21:1
Slow Idle Speed, rpm 800
High Idle Speed, rpm 3000
Firing Order 1-2-3
Fuel Injection Pump Bosch K mini pump
Fuel Injection Pressure, MPa (psi) 13.73 (1991)
Fuel Tank Capacity, gal (L) 7.7 (29.1)
Oil Capacity, qts (L) 6.0 (5.7)
Coolant Capacity, qts (L) 4.9 (4.6)
Electrical System Rating, Volts 12
Starting System Electric starting with cell starter
Battery Rating, Ah 110

Power Take-Off
PTO Operational Type Transmssion / Live (opt)
PTO Horsepower, hp (kW) 23.5 (17.5)
Rear PTO Speeds, rpm 540/1000
Mid PTO Optional
Mid PTO Speeds, rpm 1080/2000

Standard Transmission
Transmission Type Mechanical shuttle
Gearbox Type 8F/8R, 4 gears in 2-ranges
Number of Forward Gears 8
Number of Reverse Gears 8
Clutch Type Dual-stage type
Maximum Forward Speed, mph (kph) 13.3 (21.4)
Maximum Reverse Speed, mph (kph) 13.3 (21.4)

Optional Transmission
Transmission Type Glide Shift (GST)
Gearbox Type 8F/8R
Number of Forward Gears 8
Number of Reverse Gears 8
Clutch Type Dry disc
Transmission Oil Capacity, qt (L) 28.5 (27.0)
Maximum Forward Speed, mph (kph) 13.3 (21.4)
Maximum Reverse Speed, mph (kph) 13.3 (21.4)


Wheels and Tires
Drive Wheels 2WD/4WD
Steering Configuration Front Steer
Steering System Power Steering
Service Brake Wet disc
Front Tire Size (2WD) 4.00-15
Front Tire Size (4WD) 7.00-16
Rear Tire Size 11.2-24
Front Tread (2WD), in (mm) 37.8-49.6 (960-1250)
Front Tread (4WD), in (mm) 44.1 (1120)
Rear Tread, in (mm) 40.6-55.1 (1030-1390)

Hydraulic System
Hydraulic System Type Open center
Implement Pump Type Gear
Implement Pump Flow, gpm (Lpm) 8.2 (31.0)
Hydraulic Pressure, Bar (psi) 172 (2500)
Hydraulic Capacity, gal (L) 7.5 (28.4)
3-Point Hitch Category 1
Draft Sensing or Lift Control Position control with optional draft control
Standard Lift Capacity 24-in (600mm) behind pin, lb (kg) 1985 (900)
Standard Lift Capacity at lift pin, lb (kg) 2650 (1200)

Dimensions and Weight
Wheelbase, in (mm) 64.6 (1640)
Length, in (mm) 109.1 (2770)
Height (Steering Wheel), in (mm) 58.1 (1470)
Height (ROPS), in (mm) 83.1 (2110)
Overall Width, in (mm) 51.4 (1300)
Ground Clearance, in (mm) 13.6 (340)
Weight (2WD), lb (kg) 2380 (1080)
Weight (4WD), lb (kg) 2600 (1180)
Weight (with GST), lb (kg) 2655 (1205)

________________________________________________________________________________________

________________________________________________________________________________________

Farm Tractors Technical Specifications
JD 1026R JD 3650 JD 6400 JD 7810
KUBOTA B7500 KUBOTA L245 KUBOTA L2250 KUBOTA M4072
FORD 1320 FORD 2810 FORD 3930 FORD 5600
MF 250 MF 690 MF 3060 MF 6180
NH TC48DA NH M100 NH T7550 NH 8560
CASE IH 495 CASE IH 1255XL CASE IH 2140 CASE IH 2294