Home / Farm Tractors / Kubota Tractors / Kubota L3301

Kubota L3301 Tractor

The Kubota L3301 compact utility tractor was manufactured from 2014 to 2021. This model was designed in two versions: L3301F (2WD) and L3301DT (4WD). The Kubota L3301 driveline consists of a 111.4 cu.in (1.83 L) Kubota D1803-CR-E4 four-cycle vertical three-cylinder direct injection liquid-cooled diesel engine and Synchro-Shuttle transmission with 8 forward and 8 reverse gears.

The engine has a cylinder bore of 3.43" (87 mm), piston stroke of 4.03" (102.4 mm), rated power of 33 hp (24.6 kW), and maximum torque of 101.7 Nm (75.2 lb-ft) at 1500 rpm. The maximum forward speed - 13.2 mph (21.2 kph), max. reverse speed - 13.1 mph (21.1 kph). The open center hydraulic system used a gear pump with fluid flow rate of 6.3 gpm (23.9 lpm). The main relief pressure is 162 bar (2350 psi).

The four-wheel drive models are equipped with 5.00x15 front tyres and 11.2x24 rear tyres. The 7.2x16 or 27x8.50-15 front tyres and 11.2x24 or 15x19.5 rear tyres fit two-wheel drive tractors. The wheelbase is 63.3" (1610 mm). Compatible attachments for the tractor: Kubota LA525 front-end loader with lift capacity to full height of 1131 lbs (513 kg), and Kubota BH77 backhoe with 2-ft flat digging depth of 89.8" (2280 mm).

Engine Model Kubota D1803-CR-E4
Engine Type 4-cycle vertical direct injection diesel
Number of Cylinders 3
Total Displacement, cu in (L) 111.4 (1.83)
Cylinder Bore, in (mm) 3.43 (87.0)
Piston Stroke, in (mm) 4.03 (102.4)
Aspiration Naturally aspirated
Rated Engine Power, hp (kW) 33.0 (24.6)
Rated Engine Speed, rpm 2700
Low Idle Speed, rpm 900
Maximum Torque, Nm (lb-ft) 101.7 (75.2)
Torque Speed, rpm 1500
Compression Ratio 23.8:1
Firing Order 1-2-3
Fuel System Common rail direct injection
Fuel System Control Electronic
Lubricating system Forced lubrication by pump
Cooling system Forced circulation with water pump
Emission Level Tier 4 Final
Fuel Tank Capacity, gal (L) 11.0 (42.0)
Oil Capacity, qts (L) 7.1 (6.7)
Coolant Capacity, qts (L) 6.3 (6.0)
Electrical System Rating, Volts 12
Charging System Alternator
Alternator Rating, Amps 40

Power Take-Off
PTO Operational Type Transmission
PTO Horsepower, hp (kW) 27.7 (20.8)
PTO Clutch Dry disc
PTO Speed, rpm 540
PTO / Engine Speed, rpm 540/2430

Transmission Type Synchro-Shuttle
Gearbox Type 8F/8R, gear shift
Number of Forward Gears 8
Number of Reverse Gears 8
Clutch Type Dry disc
Oil Capacity (2WD), qts (L) 29.7 (28.0)
Oil Capacity (4WD), qts (L) 30.2 (28.5)
Maximum Forward Speed, mph (kph) 13.2 (21.2)
Maximum Reverse Speed, mph (kph) 13.1 (21.1)

Wheels and Tires
Drive Wheels 2WD/4WD
Steering Configuration Front Steer
Steering System Integral power steering
Brake Type Wet disc
Front Tire Size (2WD) 5.00x15
Front Tire Size (4WD) 7.2x16
Rear Tire Size 11.2x24
Front Tire Size (Industrial) 27x8.50-15
Rear Tire Size (Industrial) 15x19.5
Front Tread (2WD), in (mm) 41.3 (1050)
Front Tread (4WD), in (mm) 43.1 (1095)
Rear Tread, in (mm) 43.8-50.8 (1115-1290)

Hydraulic System
Hydraulic System Type Open Center
Main Hydraulic Pump Type Gear
Implement Pump Flow, gpm (Lpm) 6.3 (23.9)
Steering Pump Flow, gpm (Lpm) 3.8 (14.5)
Hydraulic Pressure, Bar (psi) 162 (2350)
Number of Standard Remote Valves 1/3
3-Point Hitch Category Category 1
Draft Sensing or Lift Control Position Control
Rear Lift Capacity at 24" (0.6m) behind pin, lb (kg) 1433 (650)
Rear Lift Capacity at pin, lb (kg) 1985 (900)

Dimensions and Weight
Wheelbase, in (mm) 63.3 (1610)
Length (2WD), in (mm) 110.6 (2810)
Length (4WD), in (mm) 107.9 (2740)
Height (ROPS), in (mm) 91.7 (2330)
Height (Steering Wheel), in (mm) 58.1 (1475)
Overall Width, in (mm) 55.1 (1400)
Ground Clearance (2WD), in (mm) 13.6 (345)
Ground Clearance (4WD), in (mm) 13.4 (340)
Turning Radius (2WD), in (mm) 94.5 (2400)
Turning Radius (4WD), in (mm) 98.4 (2500)
Weight (2WD), lb (kg) 2555 (1160)
Weight (4WD), lb (kg) 2735 (1240)



Farm Tractors Technical Specifications
JD 1026R JD 3650 JD 6400 JD 7810
FORD 1320 FORD 2810 FORD 3930 FORD 5600
MF 250 MF 690 MF 3060 MF 6180
NH TC48DA NH M100 NH T7550 NH 8560
CASE IH 495 CASE IH 1255XL CASE IH 2140 CASE IH 2294