________________________________________________________________________________________
Kubota M105X Maintenance
The
Kubota M105X is a 4x4 (4WD) row-crop tractor. This model was manufactured from
2005 to 2007. The Kubota M105X tractor is powered by Kubota V3800-TI-E2 4-cycle
4-cylinder direct injection turbocharged diesel engine.
A 230 cubic inches (3.8L) engine has a cylinder bore of 3.94" (100 mm),
piston stroke of 4.72" (120 mm), and rated power of 105 hp (78.3 kW).
The Kubota M105X is fitted with two transmission options: Intelli-Shift
partial powershift transmission with 16 forward and 16 reverse gears,
and Intell-Shift Creeper transmission with 24 forward and 24 reverse
gears.
The maximum speed (travel/creeper): 21.4 mph (34.5 km/h) and 0.7 mph
(1.1 km/h). The open center hydraulic system includes a gear pump with a
flow rate of 18.1 gpm (68.5 lpm). The main relief pressure is 196 bar
(2845 psi). The Kubota M105X was equipped with a hydrostatic power
steering system, hydraulic wet disc brakes, 13.6R24 front tires, and
18.4R34 rear tires. The wheelbase is 95.9" (2430 mm). The tractor is
compatible with a Kubota LA1301S loader with maximum lift height of
143.3" (3630 mm).
Engine oil capacity, gal (L) |
2.8 (10.7) |
Engine coolant capacity, gal (L) |
2.65 (10.0) |
Hydraulic/transmission fluid capacity, gal (L) |
15.8 (60.0) |
Front axle oil capacity, gal (L) |
2.75 (10.5) |
Recommended Oil and Fluid |
Engine oil type |
SAE 20, SAE 30, 10W-30, 10W-40. API Service category CD, CE, CF |
Engine coolant type |
Kubota Antifreeze/Coolant |
Hydraulic/transmission fluid type |
Kubota Super UDT Fluid |
Front axle oil type |
Kubota Super UDT, SAE 80, SAE 80W-90 Gear Oil |
Check hydraulic/transmission fluid level |
Every 50 hours |
Check front axle oil level |
Every 50 hours |
Lubricate axle hub bearings |
Every 50 hours |
Clean engine air filter elements |
Every 100 hours |
Check battery and clean terminals |
Every 100 hours |
Inspect and adjust fan belt |
Every 100 hours |
Adjust parking and service brakes |
Every 100 hours |
Clean cab air filters |
Every 200 hours |
Adjust toe-in |
Every 200 hours |
Check and adjust engine idling |
Every 200 hours |
Check power steering oil line |
Every 200 hours |
Replace hydraulic/transmission oil filter |
Every 200 hours |
Change engine oil |
Every 300 hours |
Replace engine fuel filter |
Every 400 hours |
Clean water separator |
Every 400 hours |
Replace engine oil filter |
Every 600 hours |
Change hydraulic/transmission fluid |
Every 600 hours |
Change front axle oil |
Every 600 hours |
Check and adjust valve clearance |
Every 800 hours |
Replace primary engine air filter element |
Every 1000 hours |
Replace secondary engine air filter element |
Every 1000 hours |
Clean fuel injection nozzles |
Every 1500 hours |
Flush cooling system and add new coolant |
Every 2000 hours |
Engine oil filter part number |
HH1C0-32430 |
Engine fuel filter part number |
HH166-43560, 1G311-43380 |
Primary engine air filter part number |
59700-26112 |
Secondary engine air filter part number |
55231-26150 (Element) |
Cab air filter part number |
52241-21650, 33760-50320 |
Hydraulic/transmission oil filter part number |
HH330-82630, HH520-15320 |
Drive belt part number |
3P200-15783 |
________________________________________________________________________________________
________________________________________________________________________________________
Farm Tractors Technical Specifications |