________________________________________________________________________________________
Kubota M125X Maintenance
The
Kubota M125X is a 4WD row crop tractor. This model was manufactured from 2005 to
2008. The Kubota M125X tractor is powered by 355.9 cu.in (5.8L) Kubota F5802-TE2
four-cycle five-cylinder direct injection turbocharged liquid-cooled diesel
engine with a rated power of 125 hp (93.2 kW).
The Kubota M125X is fitted with 2 transmission options: Intelli-Shift
partial powershift transmission with 16 forward and 16 reverse gears,
and Intell-Shift Creeper transmission with 24 forward and 24 reverse
gears. The maximum forward/reverse speed (travel/creeper) - 21.4 mph
(34.5 km/h) / 0.7 mph (1.1 km/h). The open center hydraulic system
includes a gear pump with a rated capacity of 20 gpm (75.7 lpm). The
hydraulic pressure is 196 bar (2845 psi).
The Kubota M125X is equipped with a hydrostatic power steering system,
hydraulic wet disc brakes, standard cab with heat and air-conditioning,
14.9R24 or 13.6x24 front tires, and 18.4R38 or 16.9x38 rear tires. The
wheel base is 105.9 in (2680 mm). The tractor is compatible with a
Kubota LA1601S loader with lift capacity to max height of 3858 lbs (1749
kg) and breakout force of 6110 lbs (2771 kg).
| Engine oil capacity, gal (L) |
5.4 (20.8) |
| Engine coolant capacity, gal (L) |
3.45 (13.0) |
| Hydraulic/transmission fluid capacity, gal (L) |
15.8 (60.0) |
| Front axle oil capacity, gal (L) |
3.4 (12.9) |
| Recommended Oil and Fluid |
| Engine oil type |
SAE 20, SAE 30, 10W-30, 15W-40. API Service category CF, CG, CH |
| Engine coolant type |
Kubota Antifreeze/Coolant |
| Hydraulic/transmission fluid type |
Kubota Super UDT-2 Fluid |
| Front axle oil type |
Kubota Super UDT-2, SAE 80, SAE 80W-90 Gear Oil |
| Check hydraulic/transmission fluid level |
Every 50 hours |
| Check front axle oil level |
Every 50 hours |
| Lubricate axle hub bearings |
Every 50 hours |
| Clean engine air filter elements |
Every 100 hours |
| Check battery and clean terminals |
Every 100 hours |
| Inspect and adjust fan belt |
Every 100 hours |
| Adjust parking and service brakes |
Every 100 hours |
| Clean cab air filters |
Every 200 hours |
| Adjust toe-in |
Every 200 hours |
| Check and adjust engine idling |
Every 200 hours |
| Check power steering oil line |
Every 200 hours |
| Replace hydraulic/transmission oil filter |
Every 300 hours |
| Change engine oil |
Every 300 hours |
| Replace engine oil filter |
Every 300 hours |
| Replace engine fuel filter |
Every 400 hours |
| Change hydraulic/transmission fluid |
Every 600 hours |
| Change front axle oil |
Every 600 hours |
| Check and adjust valve clearance |
Every 800 hours |
| Replace primary engine air filter element |
Every 1000 hours |
| Replace secondary engine air filter element |
Every 1000 hours |
| Clean fuel injection nozzles |
Every 1500 hours |
| Flush cooling system and add new coolant |
Every 2000 hours |
| Engine oil filter part number |
HH160-32430 |
| Engine fuel filter part number |
HH166-43560 |
| Primary engine air filter part number |
3P300-11220 |
| Secondary engine air filter part number |
3P300-11230 (Element) |
| Cab air filter part number |
33760-50320, 3P300-11230, 52241-21650 |
| Hydraulic/transmission oil filter part number |
HH330-82630, HH520-15320 |
| Drive belt part number |
3M760-15780 |
________________________________________________________________________________________
________________________________________________________________________________________
| Farm Tractors Technical Specifications |
