________________________________________________________________________________________
Kubota M135X Tractor
The
Kubota M135X row crop tractor was manufactured between 2009 and 2014. This model
was designed in two versions: M135XDTC (Standard front axle) and M135XDTSC
(Front axle suspension). The Kubota M135X tractor is powered by Kubota
V6108-TI-CRS 4-cycle 4-cylinder direct injection turbocharged diesel engine. A
373.7 cubic inches (6.1L) engine has a cylinder bore of 4.65" (118 mm), piston
stroke of 5.51" (140 mm), and rated power of 135 hp (100.7 kW).
The Kubota M135X is fitted with two transmission options: Intelli-Shift
partial powershift transmission with 16 forward and 16 reverse gears,
and Intell-Shift Creeper transmission with 24 forward and 24 reverse
gears. Max travel speed - 22.5 mph (36.3 km/h), max creeper speed - 0.7
mph (1.1 km/h). The open center hydraulic system used a gear pump with
fluid flow rate of 20.4 gal/min (77.7 l/min). The hydraulic pressure is
196 bar (2845 psi).
The Kubota M135X was equipped with a hydrostatic power steering,
hydraulic wet disc brakes, 14.9R24 or 420/70R24 front tires, and 18.4R38
or 520/80R38 rear tires. The wheelbase is 105.9" (2680 mm). The tractor
is compatible with a Kubota LA1601S loader with lift capacity to max
height of 4877 lbs (2212 kg) and breakout force of 6398 lbs (2902 kg).
| Engine Model |
Kubota V6108-TI-CRS |
| Engine Type |
4-cycle, direct injection turbocharged diesel |
| Number of Cylinders |
4 |
| Displacement, cu in (L) |
373.7 (6.1) |
| Engine Bore, in (mm) |
4.65 (118.0) |
| Engine Stroke, in (mm) |
5.51 (140.0) |
| Aspiration |
Turbocharged |
| Rated Engine Power, hp (kW) |
135.0 (100.7) |
| Rated Engine Speed, rpm |
2200 |
| Firing Order |
1-3-4-2 |
| Fuel System Type |
High Pressure Common Rail |
| Fuel System Control |
Electronic |
| Block Design |
Parent bore block |
| Emission Level |
Tier 4 Interim |
| Fuel Tank Capacity, gal (L) |
50.2 (190.0) |
| Oil Capacity, qts (L) |
15.4 (14.6) |
| Electrical System Rating, Volts |
12 |
| Alternator Rating, Amps |
80 |
| PTO Operational Type |
Independent |
| PTO Horsepower, hp (kW) |
118.0 (88.0) |
| PTO Speed, rpm |
540/1000 |
| PTO / Engine Speed, rpm |
540/2035 |
| PTO / Engine Speed, rpm |
1000/2210 |
| Transmission Type |
Intelli-Shift |
| Gearbox Type |
16F/16R, partial powershift |
| Number of Forward Gears |
16 |
| Number of Reverse Gears |
16 |
| Clutch Type |
Electro-hydraulic wet discs |
| Oil Capacity, qts (L) |
63.2 (59.8) |
| Maximum Forward Speed, mph (kph) |
22.5 (36.3) |
| Maximum Reverse Speed, mph (kph) |
22.5 (36.3) |
| Transmission Type |
Intell-Shift Creeper |
| Gearbox Type |
24F/24R |
| Number of Forward Gears |
24 |
| Number of Reverse Gears |
24 |
| Maximum Forward Speed, mph (kph) |
0.7 (1.1) |
| Maximum Reverse Speed, mph (kph) |
0.7 (1.1) |
| Drive Wheels |
4WD 4x4 |
| Steering Configuration |
Front steering |
| Steering System |
Hydrostatic power |
| Brakes Type |
Hydraulic wet disc |
| Front Tire Size (Std) |
14.9R24 |
| Rear Tire Size (Std) |
18.4R38 |
| Front Tire Size (Opt) |
420/70R24 |
| Rear Tire Size (Opt) |
520/80R38 |
| Front Tread, in (mm) |
69.7-73.6 (1770-1860) |
| Front Tread, in (mm) |
62.6-82.3 (1590-2090) |
| Hydraulic System Type |
Open center |
| Implement Pump Flow, gpm (Lpm) |
20.4 (77.7) |
| Steering Pump Flow, gpm (Lpm) |
15.3 (57.8) |
| Hydraulic Pressure, Bar (psi) |
196 (2845) |
| Hydraulic Fluid Capacity, gal (L) |
15.8 (59.8) |
| 3-Point Hitch Category |
2 |
| Draft Sensing or Lift Control |
Position and electronic draft control |
| Standard Lift Capacity at lift pin, lb (kg) |
5810 (2635) |
| Optional Lift Capacity at lift pin, lb (kg) |
9450 (4285) |
| Upper Link Pin Diameter, in (mm) |
1.00 (25.4) |
| Upper Link Hole Diameter, in (mm) |
1.01 (25.7) |
| Lower Link Pin Diameter, in (mm) |
1.10 (27.9) |
| Lower Link Hole Diameter, in (mm) |
1.13 (28.7) |
| Wheelbase, in (mm) |
105.9 (2680) |
| Length, in (mm) |
171.7 (4360) |
| Height, in (mm) |
107.3 (2720) |
| Overall Width, in (mm) |
89 (2260) |
| Ground Clearance, in (mm) |
24.2 (610) |
| Turning Radius, in (mm) |
162 (4100) |
| Weight, lb (kg) |
10140 (4600) |
________________________________________________________________________________________
________________________________________________________________________________________
| Farm Tractors Technical Specifications |
