________________________________________________________________________________________
Home / Farm Tractors / Kubota Tractors / Kubota M4050 |
Kubota M4050 Maintenance
The Kubota M4050 is a 2-wheel drive or 4-wheel drive (M4050DT) utility tractor. This model was manufactured from 1982 to 1985. The components of Kubota M4050 powerline system: a 158.6 cubic inches (2.6 L) Kubota S2600 4-cycle 6-cylinder liquid-cooled diesel engine with a rated power of 48 hp (35.8 kW), and constant mesh transmission with 8 forward and 2 reverse gears. The maximum travel speed (forward/reverse): 14.9 mph (23.9 km/h) and 7 mph (11.2 km/h). The open center hydraulic system includes a gear pump with rated fluid flow of 9.25 gal/min (35 l/min).
The 2WD models are equipped with 6.00x16 front tires and 13.6x28 rear tires. The 8.30x20 front tires and 13.6x28 rear tires are used for 4WD tractors. The wheelbase is 78.1" (1980 mm) for 2WD models, and 80" (2030 mm) for 4WD models. The Kubota M4050 tractor is compatible with Kubota M1830 front-end loader with a lift capacity to full height of 1990 lbs (902 kg) and breakout force of 2750 (1247 kg).
REFILL CAPACITIES |
Engine oil capacity, gal (L) ............... 3.4 (12.7)
Engine coolant capacity, gal (L) ............... 2.25 (8.5)
Hydraulic/transmission fluid capacity, gal (L) ............... 13.1 (49.5)
RECOMMENDED OIL AND FLUID |
Engine oil type ............... SAE10W, SAE20, SAE 10W-30
Engine coolant type ............... Kubota Antifreeze and clean water mix
Hydraulic/transmission fluid type ............... Kubota UDT or Kubota Super UDT
SERVICE INTERVALS |
Check battery condition ............... every 100 hours
Change engine oil ............... every 150 hours
Replace engine oil filter ............... every 150 hours
Clean primary air filter element ............... every 200 hours
Clean secondary air filter element ............... every 200 hours
Check fan belt ............... every 200 hours
Replace fuel filter ............... every 400 hours
Clean hydraulic oil filter ............... every 400 hours
Change transmission fluid ............... every 600 hours
Change front axle case oil ............... every 600 hours
Adjust engine valve clearance ............... every 800 hours
Change engine coolant ............... every 1000 hours
REPLACEMENT PARTS |
Engine oil filter part number ............... 15402-32430
Engine fuel filter part number ............... 15601-43170
Primary air filter part number ............... 70000-11080
Secondary air filter part number ............... 15612-11180
Hydraulic filter part number ............... 36200-82630
Drive belt part number ............... 15606-97012
________________________________________________________________________________________
________________________________________________________________________________________
Farm Tractors Technical Specifications |