________________________________________________________________________________________

Home / Farm Tractors / Kubota Tractors / Kubota M8030

Kubota M8030 Maintenance

The Kubota M8030 utility tractor was manufactured between 1986 and 1997. This model has three variants: M8030F (2WD), M8030DT (4WD), and M8030DTM (Mudder). The Kubota M8030 driveline consists of Kubota V4300-1A 4-stroke 4-cylinder liquid-cooled diesel engine and 16x4 fully synchronized transmission. A 262 cubic inches (4.3 L) engine has a cylinder bore of 4.29" (109 mm), piston stroke of 4.53" (115 mm), and rated power of 81 hp (60.4 kW).

The maximum forward speed - 18.8 mph (30.2 km/h), maximum reverse speed - 7.3 mph (11.7 km/h). The open center hydraulic system includes a gear pump with rated fluid flow of 11 gpm (41.6 lpm). The hydraulic system pressure is 181.5 bar (2630 psi). The Kubota M8030 is equipped with a hydrostatic power steering, differential mechanical wet disc brakes, 7.50x18 (2WD) or 11.2x24 (4WD) front tyres, and 18.4x30 rear tyres. The tractor is compatible with Kubota M1880A loader with a lift capacity of 2700 lbs (1224 kg) and breakout force of 4700 (2131 kg).

REFILL CAPACITIES

Engine oil capacity, gal (L) ............... 3.4 (13.0)
Engine coolant capacity, gal (L) ............... 3.6 (13.7)
Hydraulic/transmission fluid capacity, gal (L) ............... 16.1 (61.2)

RECOMMENDED OIL AND FLUID

Engine oil type ............... SAE20, SAE30, or SAE 10W-30
Engine coolant type ............... Kubota Antifreeze and clean water mix
Hydraulic/transmission fluid type ............... Kubota UDT or Kubota Super UDT

SERVICE INTERVALS

Check battery condition ............... every 100 hours
Change engine oil ............... every 200 hours
Clean primary air filter element ............... every 200 hours
Clean secondary air filter element ............... every 200 hours
Check fan belt ............... every 200 hours
Replace engine oil filter ............... every 400 hours
Replace fuel filter ............... every 400 hours
Clean hydraulic oil filter ............... every 400 hours
Change transmission fluid ............... every 600 hours
Change front axle case oil ............... every 600 hours
Adjust engine valve clearance ............... every 800 hours
Change engine coolant ............... every 1000 hours

REPLACEMENT PARTS

Engine oil filter part number ............... HH160-32430
Engine fuel filter part number ............... 15451-43560
Engine fuel filter gasket part number ............... 15351-43320 and 15451-96830
Primary air filter part number ............... 15724-11080
Secondary air filter part number ............... 15724-11180
Hydraulic filter part number ............... H3380-82630 and 36330-63460
Drive belt part number ............... 15451-99380

________________________________________________________________________________________

________________________________________________________________________________________

Farm Tractors Technical Specifications
JD 1026R JD 3650 JD 6400 JD 7810
KUBOTA B7500 KUBOTA L245 KUBOTA L2250 KUBOTA M4072
FORD 1320 FORD 2810 FORD 3930 FORD 5600
MF 250 MF 690 MF 3060 MF 6180
NH TC48DA NH M100 NH T7550 NH 8560
CASE IH 495 CASE IH 1255XL CASE IH 2140 CASE IH 2294