________________________________________________________________________________________

Home / Farm Tractors / Mahindra Tractors / Mahindra 3535

Mahindra 3535 Tractor

The Mahindra 3535 compact utility tractor was manufactured between 2009 and 2018. The Mahindra 3535 tractor is powered by Mahindra CE-35 3-cylinder direct injection water-cooled diesel engine. A 115.4 cubic inches (1.9 L) engine has a cylinder bore of 3.5" (89 mm), piston stroke of 4.0" (102 mm), and rated power of 35 hp (26 kW). The Mahindra 3535 is fitted with a two transmission options: 12x12 full synchromesh transmission, or three-range hydrostatic transmission.

The maximum forward speed - 15.3 mph (24.5 km/h), maximum reverse speed - 14.4 mph (23 km/h). The open center hydraulic system includes a gear pump with rated fluid flow of 11 gal/min (41.6 l/min). The main relief pressure is 203 bar (2950 psi). The tractor is equipped with a hydrostatic power steering system, wet disc brakes, 28x8.5-15 front tyres, and 43x16-20 rear tyres. The wheelbase is 71 inches (1800 mm). The tractor is compatible with Mahindra ML120 front end-loader with a maximum lift height of 106" (2690 mm), and Mahindra 485 backhoe with maximum digging depth of 101" (2555 mm).

Engine Specs

Engine Model ............. Mahindra CE-35
Engine Type ............. 4-cycle 3-cylinder direct injection diesel
Number of Cylinders ............. Three
Total Displacement, cu in (L) ............. 115.4 (1.91)
Cylinder Bore, in (mm) ............. 3.50 (89.0)
Piston Stroke, in (mm) ............. 4.00 (102.0)
Aspiration Type ............. Naturally aspirated
Rated Engine Power, hp (kW) ............. 35.0 (26.0)
Rated Engine Speed, rpm ............. 2800
High Idle Speed, rpm ............. 2900-3000
Low Idle Speed, rpm ............. 950-1050
Compression Ratio ............. 19.5:1
Firing Order ............. 1-3-2
Cylinder Sleeve ............. Wet-replaceable
Fuel System Type ............. Direct Injection
Governor Type ............. Mechanical
Air Cleaner Type ............. Dry element
Oil Filter Type ............. Spin-on paper element
Cooling System ............. Water-cooled, forced circulation
Fuel Tank Capacity, gal (L) ............. 11.3 (43.0)
Oil Capacity, qts (L) ............. 6.3 (6.0)
Coolant Capacity, qts (L) ............. 7.4 (7.0)
Electrical System Rating, Volts ............. 12
Charging System ............. Alternator
Alternator Rating, Amp ............. 45

Power Take Off

PTO Operational Type ............. Live
PTO Horsepower (Shuttle Transmission), hp (kW) ............. 29.0 (21.6)
PTO Horsepower (HST Transmission), hp (kW) ............. 27.5 (20.4)
Rear PTO Speed, rpm ............. 540
Rear PTO / Engine Speed, rpm ............. 540/2404

Transmission

Transmission Type ............. Synchro Shuttle
Gearbox Type ............. 12F/12R, full synchromesh
Number of Forward Gears ............. 12
Number of Reverse Gears ............. 12
Clutch Type ............. Dry disc
Maximum Forward Speed, mph (kph) ............. 15.3 (24.5)
Maximum Reverse Speed, mph (kph) ............. 14.4 (23.0)

Transmission Type ............. Hydrostatic
Number of Forward Gears ............. Infinite (3-range)
Number of Reverse Gears ............. Infinite (3-range)
Oil Capacity, qts (L) ............. 40.1 (37.8)
Maximum Forward Speed, mph (kph) ............. 13.3 (21.3)
Maximum Reverse Speed, mph (kph) ............. 13.3 (21.3)

Wheels and Tires

Drive Wheels ............. 4WD 4x4
Steering Configuration ............. Front steer
Steering System ............. Hydrostatic power
Brakes Type ............. Wet disc
Front Tire Size (Industrial) ............. 28x8.5-15
Rear Tire Size (Industrial) ............. 43x16-20
Front Tread, in (mm) ............. 47.6-48.5 (1205-1230)
Rear Tread, in (mm) ............. 53.1 (1345)

Hydraulic System

Hydraulic System Type ............. Open center
Implement Pump Type ............. Gear
Implement Pump Flow, gpm (Lpm) ............. 11.0 (41.6)
Steering Pump Flow, gpm (Lpm) ............. 5.0 (18.9)
Hydraulic Pressure, bar (psi) ............. 203 (2950)
Number of Standard Remote Valves ............. 0/2
3-Point Hitch Category ............. 1
Draft Sensing or Lift Control ............. Position and draft control
Lift Capacity at Pin, lbs (kg) ............. 2835 (1285)

Dimensions and Weight

Wheelbase, in (mm) ............. 70.9 (1800)
Overall Length, in (mm) ............. 123 (3120)
Overall Height (ROPS), in (mm) ............. 94.7 (2400)
Overall Width, in (mm) ............. 69.4 (1760)
Turning Radius, in (mm) ............. 112 (2840)
Weight (Shuttle Transmission), lbs (kg) ............. 3850 (1750)
Weight (HST Transmission), lbs (kg) ............. 4125 (1870)

Front End Loader

Loader Model ............. Mahindra ML120
Maximum Lift Height (Pivot Pin), in (mm) ............. 106 (2690)
Clearance with Bucket Dumped, in (mm) ............. 85 (2150)
Reach at Maximum Overall Height, in (mm) ............. 24.5 (620)
Dump Angle, deg ............. 40
Rollback Angle, deg ............. 19
Lift Capacity to Full Height (Pivot Pin), lbs (kg) ............. 2400 (1088)
Breakout Force (Pivot Pin), lbs (kg) ............. 3900 (1770)
Bucket Overall Width, in (mm) ............. 72 (1820)
Loader Weight, lbs (kg) ............. 1285 (580)

Backhoe

Backhoe Model ............. Mahindra 485
Digging Depth, in (mm) ............. 101 (2555)
Digging Depth (2-ft Flat), in (mm) ............. 100 (2530)
Reach from Swing Pivot, in (mm) ............. 127 (3215)
Loading Overall Height, in (mm) ............. 63 (1595)
Bucket Rotation, deg ............. 180
Swing Arc, deg ............. 180
Transport Overall Height, in (mm) ............. 81 (2050)
Bucket Digging Force, lbs (kg) ............. 3895 (1770)
Dipperstick Digging Force, lbs (kg) ............. 2358 (1072)
Backhoe Weight, lbs (kg) ............. 1010 (460)

________________________________________________________________________________________

________________________________________________________________________________________

Farm Tractors Technical Specifications
JD 1026R JD 3650 JD 6400 JD 7810
KUBOTA B7500 KUBOTA L245 KUBOTA L2250 KUBOTA M4072
FORD 1320 FORD 2810 FORD 3930 FORD 5600
MF 250 MF 690 MF 3060 MF 6180
NH TC48DA NH M100 NH T7550 NH 8560
CASE IH 495 CASE IH 1255XL CASE IH 2140 CASE IH 2294