Home / Farm Tractors / Massey Ferguson Tractors / MF 8130

Massey Ferguson 8130 Tractor

The Massey Ferguson 8130 is a row-crop tractor from 8100 series. This model was manufactured between 1995 and 1999. The Massey Ferguson 8130 tractor is equipped with a Perkins 1006-6 4-stroke 6-cylinder direct injection liquid-cooled turbocharged diesel engine. A 365 cubic inches (6 L) engine has a cylinder bore of 3.94" (100 mm), piston stroke of 5" (127 mm), rated power of 156 hp (115.6 kW), and 625 Nm (464 lb-ft) of max torque at 1400 rev/min.

The Dynashift transmission consists of a wet clutch with six discs and 4-speed powershift gearbox with 32 forward and 32 reverse gears. The maximum travel speed (forward and reverse): 24.5 mph (39.4 km/h). The closed center hydraulic system with flow and pressure control has a variable displacement pump with rated capacity of 42.3 gpm (160 lpm). The open center hydraulic system has a two-stage gear pump with flow rate of 5.5 gpm (21 lpm) using 1st stage and 14.2 gpm (54 lpm) using 2nd stage.

The hydraulic system pressure is 180 bar (2600 psi) for closed center and 185 bar (2685 psi) for open center. The Massey Ferguson 8130 was equipped with a hydrostatic power steering, wet disc brakes, 11.0x16 (2WD) or 14.9x28 (4WD) front tires, and 16.9x28 (2WD) or 20.8x38 (4WD) rear tires. The wheel base is 110" (2775 mm) for 2-wheel drive models and 109" (2760 mm) for 4-wheel drive models.

Engine Model Perkins 1006-6
Engine Type 4-Stroke, six-cylinder liquid-cooled turbocharged diesel
Number of Cylinders 6
Displacement, cu in (L) 365 (6.00)
Engine Bore, in (mm) 3.94 (100.0)
Engine Stroke, in (mm) 5.00 (127.0)
Aspiration Turbocharged
Rated Engine Power, hp (kW) 156.0 (115.6)
Rated Engine Speed, rpm 2200
Maximum Torque, Nm (ft-lbs) 625 (464)
Torque Speed, rpm 1400
Idling Speed, rpm 1000
Lubrication Gear type pump-strainer and interchangeable external cartridge filters
Oil Filter External cartridge
Valves Overhead, pushrod operated
Cooling system Centrifugal pump pressurised radiator
Air Filter Two-stage, dry filter element
Valve clearance (Inlet), in (mm) 0.008 (0.20)
Valve clearance (Exhaust), in (mm) 0.018 (0.45)
Fuel Tank Capacity, gal (L) 58.8 (226.0)
Oil Capacity, qts (L) 16.5 (15.6)
Coolant Capacity, qts (L) 30.2 (28.5)
Electrical System Rating, Volts 12
Alternator Rating, Amps 120

Power Take-Off
PTO Horsepower, hp (kW) 139.1 (103.0)
PTO Clutch Hydraulic
Rear PTO Operational Type Independent
Rear PTO Speed, rpm 540/750/1000
Rear PTO / Engine Speed, rpm 540/1990, 750/2000, 1000/2090
Front PTO Operational Type Independent
Front PTO Speed, rpm 1000
Front PTO / Engine Speed, rpm 1000/2040

Transmission Type Dynashift
Gearbox Type 32F/32R, 4-speed powershift
Number of Forward Gears 32
Number of Reverse Gears 32
Clutch Type Wet type
Number of Disc 6
Clutch Disc Diameter, in (mm) 9.06 (230)
Reverse Shuttle Sinchronized
Oil Capacity, gal (L) 23.2 (87.5)
Maximum Forward Speed, mph (kph) 24.5 (39.4)
Maximum Reverse Speed, mph (kph) 24.5 (39.4)

Wheels and Tires
Drive Wheels 2WD/4WD
Steering Configuration Front Steer
Steering System Hydrostatic power
Steering Column Telescopic or fixed tilting
Steering Cylinder One, double action
Service Brake Type Oil-immersed disc type
Service Brake Disc Diameter, in (mm) 13.5 (343)
Service Brake Operation Hydraulic, using two master cylinders
Parking Brake Operates on the rear axle pinion
Front Wheels Adjustable steel rims
Rear Wheels Fixed or adjustable steel rims
Front Tire Size (2WD) 11.0-16
Rear Tire Size (2WD) 16.9-28
Front Tire Size (4WD) 14.9-28
Rear Tire Size (4WD) 20.8-38
Rear Track Width, in (mm) 77.6 (1970)

Hydraulic System
Hydraulic System Type (Std) Closed center with flow and pressure control
Implement Pump Type Variable displacement pump
Implement Pump Flow, gpm (Lpm) 42.3 (160.0)
High Pressure System Flow, gpm (Lpm) 29.1 (110.0)
Hydraulic Pressure, Bar (psi) 180 (2600)
Hydraulic System Type (Opt) Open center
Implement Pump Type Two-stage gear pump
Hydraulic Flow (1st Stage), gpm (Lpm) 5.5 (21.0)
Hydraulic Flow (2st Stage), gpm (Lpm) 14.2 (54.0)
Hydraulic Pressure, Bar (psi) 185 (2685)
3-Point Hitch Category 2/3
Standard Lift Capacity at lift pin, lb (kg) 13875 (6290)

Dimensions and Weight
Wheelbase (2WD), in (mm) 110 (2775)
Wheelbase (4WD), in (mm) 109 (2760)
Length (2WD), in (mm) 183.8 (4640)
Length (4WD), in (mm) 184 (4645)
Height (Cab), in (mm) 115.9 (2940)
Overall Width (2WD), in (mm) 109.1 (2770)
Overall Width (4WD), in (mm) 111.5 (2830)
Ground Clearance, in (mm) 15.2 (385)
Turning Radius, in (mm) 167.7 (4260)
Weight (2WD), lb (kg) 12750 (5780)
Weight (4WD), lb (kg) 13850 (6285)



Farm Tractors Technical Specifications
JD 1026R JD 3650 JD 6400 JD 7810
FORD 1320 FORD 2810 FORD 3930 FORD 5600
MF 250 MF 690 MF 3060 MF 6180
NH TC48DA NH M100 NH T7550 NH 8560
CASE IH 495 CASE IH 1255XL CASE IH 2140 CASE IH 2294