________________________________________________________________________________________

Home / Farm Tractors / Massey Ferguson Tractors / MF GC2600

Massey Ferguson GC2600 Tractor

The Massey Ferguson GC2600 is a 4-wheel drive sub-compact utility tractor. This model was manufactured from 2008 to 2012. The Massey Ferguson GC2600 driveline components: a 68.5 cu.in (1.13L) Iseki 3-cylinder indirect injection naturally aspirated water-cooled diesel engine with a rated power of 25 hp (18 kW), and 2-range hydrostatic transmission with infinite forward and reverse gears.

Max forward speed - 9.1 mph (14.7 km/h), max reverse speed - 6.9 mph (11 km/h). The open center hydraulic system used a gear pump with a flow of 4.8 gal/min (18.2 l/min). The rear lift capacity is 1190 lbs (540 kg) at lift pin.

The Massey Ferguson GC2600 is equipped with a hydrostatic steering system, wet disc brakes, 18x8.50-10 front tires, and 26x12.00-12 rear tires. The wheelbase is 57.1" (1450 mm). The tractor is compatible with 54" or 60" mid-mount 3-blade mower deck with hydraulic lift, 60" front-mount blade with height of 19" (480 mm), 50" front-mount two-stage snowblower with hydraulic lift, and Massey Ferguson DL100 loader with lift capacity to full height of 678 lbs (307 kg).

Engine
Engine Model Iseki
Engine Type 4 stroke, three-cylinder diesel
Number of Cylinders 3
Displacement, cu in (L) 68.5 (1.13)
Engine Bore, in (mm) 3.08 (78.2)
Engine Stroke, in (mm) 3.07 (78)
Aspiration Naturally aspirated
Rated Engine Power, hp (kW) 25.0 (18.0)
Rated Engine Speed, rpm 3000
Maximum Torque, Nm 65
Torque Speed, rpm 2200
Fuel System In-Line Pump
Fuel Injection to combustion chamber Indirect
Speed control Manual
Fuel Tank Capacity, gal (L) 6.6 (25.0)
Cooling System Liquid cooled
Electrical System Rating, Volts 12
Alternator Rating, Amps 40

Power Take-Off
Rear PTO Operational Type Independent
PTO Horsepower, hp (kW) 19.6 (14.5)
Rear PTO Speeds, rpm 540
Rear PTO / Engine Speeds, rpm 540/2829
Rear PTO Shaft Fixed, 6 spline
Mid PTO Operational Type Independent
Mid PTO Speeds, rpm 2000
Mid PTO / Engine Speeds, rpm 2000/2947

Transmission
Transmission Type Hydrostatic
Number of Forward Gears Infinite (2-range)
Number of Reverse Gears Infinite (2-range)
Drive Control Dual foot pedal
Maximum Forward Speed, mph (kph) 9.1 (14.7)
Maximum Reverse Speed, mph (kph) 6.9 (11.0)

Wheels and Tires
Drive Wheels 4WD 4x4
Steering Configuration Front Steer
Steering System Hydrostatic
Service Brake Wet disc
Front Tire Size 18x8.50-10
Rear Tire Size 26x12.00-12

Hydraulic System
Hydraulic System Type Open centre
Hydraulic Pump Type Gear
Implement Pump Flow, gpm (Lpm) 4.8 (18.2)
Steering Flow, gpm (Lpm) 2.0 (7.6)
Total Flow, gpm (Lpm) 6.8 (25.7)
3-Point Hitch Category 1
Draft Sensing or Lift Control Directional control
Link Ends Type Fixed
Standard Lift Capacity at lift pin, lb (kg) 1190 (540)

Dimensions and Weight
Wheelbase, in (mm) 57.1 (1450)
Length, in (mm) 97.6 (2480)
Height (ROPS), in (mm) 72.8 (1840)
Overall Width, in (mm) 49.6 (1190)
Ground Clearance, in (mm) 6.7 (170)
Turning Radius, in (mm) 92.8 (2350)
Weight (ROPS), lb (kg) 1432 (650)

Front End Loader
Loader Model Massey Ferguson DL100
Height (to pin), in (mm) 73 (1850)
Dump Angle, deg 43
Rollback Angle, deg 23
Breakout Force (lift), lb (kg) 950 (430)
Lift at Maximum Height (pin), lb (kg) 678 (307)
Lift at Maximum Height (500 mm), lb (kg) 470 (213)
Bucket Width, in (mm) 48 (1210)

60" Mower Deck
Mower Deck Model Massey Ferguson 2325
Mower Deck Type Mid-mount
Number of Blades 3
Cutting Width, in (mm) 60 (1520)

50" Snow Blower
Snow Blower Model Massey Ferguson 2360
Snowblower Type Front-mount, 2-stage
Clearing Width, in (mm) 50 (1270)
Overall Width, in (mm) 50.2 (1270)
Lifting System Hydraulic

60" Front Blade
Blade Model Massey Ferguson 2340
Type Front-mount
Width, in (mm) 60 (1520)
Height, in (mm) 19 (480)
Lifting Hydraulic
Working Angle Manual/Hydraulic

________________________________________________________________________________________

________________________________________________________________________________________

Farm Tractors Technical Specifications
JD 1026R JD 3650 JD 6400 JD 7810
KUBOTA B7500 KUBOTA L245 KUBOTA L2250 KUBOTA M4072
FORD 1320 FORD 2810 FORD 3930 FORD 5600
MF 250 MF 690 MF 3060 MF 6180
NH TC48DA NH M100 NH T7550 NH 8560
CASE IH 495 CASE IH 1255XL CASE IH 2140 CASE IH 2294