Home / Farm Tractors / New Holland Tractors / NH T5.105

New Holland T5.105 Tractor

The New Holland T5.105 utility tractor was manufactured from 2013 to 2021. The New Holland T5.105 is powered by 207 cu.in (3.4L) FPT F5C four-cylinder 2-valve direct injection turbocharged diesel engine with a rated power of 107 hp (79 kW) and 444 Nm (329 lb-ft) of peak torque at 1500 rpm.

The New Holland T5.105 tractor is fitted with 2 transmission options: Power Shuttle transmission with 12 forward and 12 reverse gears, and Dual Command transmission with 24 forward and 24 reverse gears. The maximum travel speed (forward and reverse): 25 mph (40 km/h).

The open center hydraulic system includes a gear pump with fluid flow rate of 12.6 gal/min (48 l/min). The hydraulic pressure is 190 bar (2755 psi). The New Holland T5.105 is equipped with a hydrostatic power steering, wet disc brakes, 10.00x16 (2WD) or 340/85R24 (4WD) front tires, and 18.4x34 (2WD) or 540/65R34 (4WD) rear tires. The wheelbase is 92.1" (2340 mm) for models with 2-wheel drive (4x2) and 90" (2285 mm) for models with 4-wheel drive (4x4).

The tractor is compatible with the following attachments: New Holland 825TL MSL loader with lift capacity to max height of 2954 lbs (1340 kg) at 31.5" (800 mm), or New Holland 835TL MSL loader with lift capacity to max height of 3680 lbs (1670 kg) at 31.5" (800 mm).

Engine Model FPT F5C
Engine Type Four-cylinder 2-valve turbocharged diesel
Number of Cylinders 4, inline
Displacement, cu.in (L) 207 (3.40)
Engine Bore, in (mm) 3.90 (99.0)
Engine Stroke, in (mm) 4.33 (110.0)
Aspiration Turbocharged
Rated Engine Power, hp (kW) 107.0 (79.0)
Rated Engine Speed, rpm 2300
Maximum Torque, Nm (lb-ft) 444 (329)
Torque Speed, rpm 1500
Firing Order 1-3-4-2
Fuel System Common rail direct injection
Emission Level Tier 4A
Fuel Tank Capacity, gal (L) 42.1 (160.0)
Oil Capacity, qts (L) 9.5 (9.0)
Coolant Capacity, qts (L) 15.9 (15.0)
Electrical System Rating, Volts 12
Charging System Alternator
Alternator Rating, Amps 120

Power Take-Off
PTO Operational Type Independent
PTO Horsepower, hp (kW) 90.0 (66.0)
PTO Speed, rpm 540
PTO Speed, rpm 540/1000
PTO Speed, rpm 540/540E/1000
PTO / Engine Speed, rpm 540/1938
PTO / Engine Speed, rpm 540E/1535
PTO / Engine Speed, rpm 1000/1926

Standard Transmission
Transmission Type Power Shuttle
Gearbox Type 12F/12R (20F/20R w/creeper), hydraulic shuttle shift
Number of Forward Gears 12 (20)
Number of Reverse Gears 12 (20)
Synchronized Gears 4
Non-synchronized Ranges 3
Maximum Speed, mph (kph) 25.0 (40.0)
Minimum Speed, mph (kph) 1.34 (2.15)
Minimum Speed (Creeper), mph (kph) 0.19 (0.30)

Optional Transmission
Transmission Type Dual Command
Gearbox Type 24F/24R (40F/40R), Hi-Lo splitter full load powershift
Number of Forward Gears 24 (40)
Number of Reverse Gears 24 (40)
Clutch Type Power clutch
Synchronized Gears (Hi/Lo) 4/4
Non-synchronized Ranges 3
Maximum Speed, mph (kph) 25.0 (40.0)
Minimum Speed, mph (kph) 0.82 (1.31)
Minimum Speed (Creeper), mph (kph) 0.11 (0.17)

Wheels and Tires
Drive Wheels 2WD/4WD
Steering Configuration Front steer
Steering System Hydrostatic power
Brakes Type Wet disc
Front Tire Size (2WD) 10.0x16
Rear Tire Size (2WD) 18.4x34
Front Tire Size (4WD) 340/85R24
Rear Tire Size (4WD) 540/65R34

Hydraulic System
Hydraulic System Type Open center
Implement Pump Type Dual gear
Implement Pump Flow (Standard), gpm (Lpm) 12.6 (48.0)
Implement Pump Flow (MegaFlow), gpm (Lpm) 16.8 (64.0)
Hydraulic Pressure, Bar (psi) 190 (2755)
Steering Pump Flow (Standard), gpm (Lpm) 7.4 (28.0)
Steering Pump Flow (MegaFlow), gpm (Lpm) 9.6 (37.0)
Steering Pressure, Bar (psi) 170 (2465)
Number of Standard Remote Valves 3/1
3-Point Hitch Category 2
Draft Sensing or Lift Control Mechanical draft control
Standard Lift Capacity at 24" (610mm) behind pin, lb (kg) 8580 (3900)
Standard Lift Capacity at pin, lb (kg) 9680 (4400)

Dimensions and Weight
Wheelbase (2WD), in (mm) 92.1 (2340)
Wheelbase (4WD), in (mm) 90 (2285)
Length, in (mm) 158.8 (4035)
Height (Cab), in (mm) 101.2 (2570)
Overall Width, in (mm) 85.2 (2165)
Ground Clearance, in (mm) 17.7 (450)
Turning Radius (2WD), in (mm) 131.9 (3350)
Turning Radius (4WD), in (mm) 166.7 (4235)
Turning Radius (SuperSteer), in (mm) 153.7 (3905)
Weight (4WD, ROPS), lb (kg) 7435 (3380)
Weight (2WD, Cab), lb (kg) 7240 (3290)
Weight (4WD, Cab), lb (kg) 8140 (3700)



Farm Tractors Technical Specifications
JD 1026R JD 3650 JD 6400 JD 7810
FORD 1320 FORD 2810 FORD 3930 FORD 5600
MF 250 MF 690 MF 3060 MF 6180
NH TC48DA NH M100 NH T7550 NH 8560
CASE IH 495 CASE IH 1255XL CASE IH 2140 CASE IH 2294