Home / Farm Tractors / New Holland Tractors / NH T5.140

New Holland T5.140 Autocommand

The New Holland T5.140 farm tractor was manufactured from 2018 to 2021. The components of New Holland T5.140 driveline system: a 274 cubic inches (4.5L) FPT Industrial Nef 4-cylinder 4 valve turbocharged diesel engine with a rated power of 140 hp (103 kW), and Auto Command continuously variable transmission (CVT) with infinite forward and reverse gears.

The engine has a high pressure common rail fuel injection, electronic fuel system control, and air cleaner with replaceable cartridges. The maximum forward speed - 25 mph (40 km/h).

The closed center load sending hydraulic system includes a fixed displacement pump with rated capacity of 21.1 gpm (80 lpm). The hydraulic pressure is 200 bar (2900 psi). The New Holland T5.140 is equipped with a hydrostatic power steering, hydraulic wet disc brakes, 13.6R24 or 440/65R24 front tires, and 18.4R34 or 540/65R34 rear tires. The wheel base is 98 in (2490 mm). The tractor is compatible with a New Holland 750TL front end loader with lift capacity to max height of 5070 lbs (2305 kg).

Engine Model FPT Industrial Nef
Engine Type 4-cylinder 4 valve turbocharged diesel
Number of Cylinders Four, in-line
Displacement, cu.in (L) 274 (4.49)
Engine Bore, in (mm) 4.09 (104.0)
Engine Stroke, in (mm) 5.20 (132.0)
Aspiration Turbocharged
Rated Engine Power, hp (kW) 140.0 (103.0)
Rated Engine Speed, rpm 2200
Maximum Torque, Nm (lb-ft) 630 (467)
Torque Speed, rpm 1300
Firing Order 1-3-4-2
Fuel System High pressure common rail
Fuel System Control Electronic
Emission Level Tier 4B
Emission Control Selective catalytic reduction (SCR)
Fuel Tank Capacity, gal (L) 47.4 (180.0)
Oil Capacity, qts (L) 13.5 (12.8)
Coolant Capacity, qts (L) 10.6 (10.0)
Electrical System Rating, Volts 12
Charging System Alternator
Alternator Rating, Amps 120

Power Take-Off
PTO Operational Type Direct drive
PTO Horsepower, hp (kW) 127.0 (94.3)
PTO Speed, rpm 540/1000
PTO Speed, rpm 540/540E/1000
PTO Speed, rpm 540E/1000/1000E
PTO / Engine Speed, rpm 540/1938
PTO / Engine Speed, rpm 540E/1546
PTO / Engine Speed, rpm 1000/1893
PTO / Engine Speed, rpm 1000E/1621

Transmission Model Auto Command
Transmission Type Continuously variable transmission (CVT)
Number of Forward Gears Infinite
Number of Reverse Gears Infinite
Driving Modes Auto, Cruise, Manual, PTO
Maximum Speed, mph (kph) 25.0 (40.0)
Minimum Speed, mph (kph) 0.012 (0.02)

Wheels and Tires
Drive Wheels 4WD 4x4
Steering Configuration Front steer
Steering System Hydrostatic power
Brakes Type Hydraulic wet disc
Front Tire Size (Std) 13.6R24
Rear Tire Size (Std) 18.4R34
Front Tire Size (Opt) 440/65R24
Rear Tire Size (Opt) 540/65R34

Hydraulic System
Hydraulic System Type Closed center load sending (CCLS)
Implement Pump Type Fixed displacement
Implement Pump Flow, gpm (Lpm) 21.1 (80.0)
Hydraulic Pressure, Bar (psi) 200 (2900)
Steering Pump Flow, gpm (Lpm) 9.6 (36.3)
Steering Pressure, Bar (psi) 230 (3330)
Number of Standard Remote Valves 4
3-Point Hitch Category 2
Draft Sensing or Lift Control Electronic draft control
Lift Capacity at pin, lb (kg) 11925 (5420)

Dimensions and Weight
Wheelbase, in (mm) 98 (2490)
Length, in (mm) 164.1 (4170)
Height (Cab), in (mm) 106.1 (2695)
Overall Width, in (mm) 90 (2285)
Turning Radius, in (mm) 181.7 (4615)
Weight (Shipping), lb (kg) 12100 (5500)
Weight (Maximum), lb (kg) 19360 (8800)



Farm Tractors Technical Specifications
JD 1026R JD 3650 JD 6400 JD 7810
FORD 1320 FORD 2810 FORD 3930 FORD 5600
MF 250 MF 690 MF 3060 MF 6180
NH TC48DA NH M100 NH T7550 NH 8560
CASE IH 495 CASE IH 1255XL CASE IH 2140 CASE IH 2294