________________________________________________________________________________________

Home / Farm Tractors / Case IH Tractors / Case IH 1056XL

Case IH 1056XL Tractor

The Case International 1056 XL is a two-wheel drive or four-wheel drive utility tractor. This model was manufactured from 1985 to 1992. The components of Case IH 1056XL driveline system: International Harvester D358 six cylinder diesel engine and 16x8 IH total-synchron gear transmission.

A 358 cu.in (5.9L) engine has a cylinder bore of 3.87" (98.4 mm), piston stroke of 5.06" (128.5 mm), rated power of 105 hp (78.3 kW), and maximum torque of 378 Nm (279.7 lb-ft) at 1400 rev/min. The max. travel speed (forward/reverse): 17.4 mph (28 km/h) and 6.6 mph (10.6 km/h).

The open center hydraulic system includes a gear pump with flow of 11.9 gal/min (45 l/min). The main relief pressure is 175 bar (2540 psi). The 4-wheel drive models are equipped with 13.6R28 front tires and 18.4R38 rear tires. The 7.50x20 front tires and 18.9R38 rear tires are used for tractors with 2-wheel drive. The wheelbase is 103.4 in (2620 mm) for 2WD models and 102 in (2590 mm) for 4WD models.

Engine
Engine Model International Harvester D358
Engine Type 4 stroke six cylinder diesel
Displacement, cu.in (L) 358.0 (5.9)
Number of Cylinders 6
Engine Bore, in (mm) 3.87 (98.4)
Engine Stroke, in (mm) 5.06 (128.5)
Rated Engine Power, hp (kw) 105.0 (78.3)
Rated Engine Speed, rpm 2300
Maximum Torque, Nm (ft-lbs) 378.0 (279.7)
Torque Speed, rpm 1400
Aspiration Natural
Fuel System Direct injection
Fuel System Control Mechanical
Cooling System Water cooled radiator
Fuel Tank, gal (L) 37.0 (140.0)
Oil Capacity, qts (L) 12
Electrical System Rating, Volts 12
Batteries Number 1
Starter Type Electric

Power Take-Off
PTO Operational Type Independent
PTO Horsepower, hp (kW) 85.0 (63.5)
PTO Speed, rpm 540/1000

Transmission
Transmission Type IH-Total-synchron
Gearbox Type 16F/8R
Number of Forward Gears 16
Number of Reverse Gears 8
Clutch Type Dry disc
Maximum Forward Speed, mph (kph) 17.4 (28.0)
Maximum Reverse Speed, mph (kph) 6.6 (10.6)

Wheels and Tires
Drive Wheels 2WD/4WD
Steering Configuration Front steer
Steering System Hydrostatic power
Brakes Type Wet disc
Front Tire Size (2WD) 7.50x20
Rear Tire Size (2WD) 18.9R38
Front Tire Size (4WD) 13.6R28
Rear Tire Size (4WD) 18.4R38
Front Tread (2WD), in (mm) 60.1-75.2 (1520-1910)
Front Tread (4WD), in (mm) 64.3-76.0 (1630-1930)
Rear Tread, in (mm) 67.1-86.8 (1700-2200)

Hydraulic System
Hydraulic System Type Open center
Implement Pump Flow, gpm (Lpm) 11.9 (45.0)
Hydraulic Pressure, Bar (psi) 175 (2540)
Number of Standard Remote Valves 3
3-Point Hitch Category 2
Draft Sensing or Lift Control Position and draft control
Standard Lift Capacity at lift pin, lb (kg) 9530 (4320)
Optional Lift Capacity at lift pin, lb (kg) 11530 (5230)

Dimensions and Weight
Wheelbase (2WD), in (mm) 103.4 (2620)
Wheelbase (4WD), in (mm) 102 (2590)
Length (2WD), in (mm) 165.2 (4190)
Length (4WD), in (mm) 167.8 (4255)
Height, in (mm) 110 (2790)
Overall Width, in (mm) 90.8 (230)
Ground Clearance (2WD), in (mm) 21.2 (530)
Ground Clearance (4WD), in (mm) 18.1 (450)
Turning Radius, in (mm) 199.1 (5050)
Weight (2WD), lb (kg) 9635 (4370)
Weight (4WD), lb (kg) 10470 (4750)

________________________________________________________________________________________

________________________________________________________________________________________

Farm Tractors Technical Specifications
JD 1026R JD 3650 JD 6400 JD 7810
KUBOTA B7500 KUBOTA L245 KUBOTA L2250 KUBOTA M4072
FORD 1320 FORD 2810 FORD 3930 FORD 5600
MF 250 MF 690 MF 3060 MF 6180
NH TC48DA NH M100 NH T7550 NH 8560
CASE IH 495 CASE IH 1255XL CASE IH 2140 CASE IH 2294