________________________________________________________________________________________

Home / Farm Tractors / Case IH Tractors / Case IH 1294

Case IH 1294 Tractor

The Case IH 1294 farm tractor was manufactured between 1984 and 1985. The components of Case IH 1294 powerline system: AD4.55 4 cylinders direct injection water-cooled naturally aspirated diesel engine and mechanical synchromesh transmission with 12 forward and 4 reverse gears.

A 219.1 cubic inches (3.6 L) engine has a cylinder bore of 3.94" (100 mm), piston stroke of 4.49" (114 mm), rated power of 62 hp (46.2 kW), and 223 Nm (165.1 lb-ft) maximum torque at 1250 rpm. Max. travel speed (forward and reverse): 19.7 mph (31.7 km/h) / 11.6 mph (18.7 km/h).

The open center hydraulic system used a gear pump with rated fluid flow of 7.8 gal/min (29 l/min). The hydraulic system pressure is 176 bar (2550 psi). The Case IH 1294 was equipped with a hydrostatic power steering, mechanical drum brakes, 7.50R16 front tires, and 13.6R38 rear tires. The wheelbase is 82.7 in (2100 mm).

Engine
Engine Model AD4.55
Engine Type 4 cylinders direct injection diesel
Number of Cylinders Four, In-line
Displacement, cu in (L) 219,1 (3,59)
Engine Bore, in (mm) 3,94 (100,0)
Engine Stroke, in (mm) 4,49 (114,0)
Aspiration Natural
Rated Engine Power, hp (kW) 62,0 (46,2)
Rated Engine Speed, rpm 2300
Maximum Torque, Nm (ft-lbs) 223 (165,1)
Torque Speed, rpm 1250
Compression 17.0:1
Cooling System Water cooled
Lubricating System Forced feed from gear pump
Fuel Tank Capacity, gal (L) 26,4 (100,0)
Oil Capacity, qts (L) 7,8 (7,4)
Coolant Capacity, qts (L) 14,3 (13,5)
Electrical System Rating, Volts 12
Battery Power, Ah 96

Power Take-Off
PTO Operational Type Independent
PTO Horsepower, hp (kW) 55,0 (41,0)
PTO Speeds, rpm 540/1000

Transmission
Transmission Type Synchromesh
Gearbox Type 12F/4R
Number of Forward Gears 12
Number of Reverse Gears 4
Oil Capacity, qts (L) 25,9 (24,5)
Maximum Forward Speed, mph (kph) 19,7 (31,7)
Maximum Reverse Speed, mph (kph) 11,6 (18,7)

Wheels and Tires
Drive Wheels 2WD 4x2
Steering Configuration Front Steer
Steering System Hydrostatic power
Service Brake Mechanical Drum
Front Tire Size 7.50 R16
Rear Tire Size 13.6 R38

Hydraulic System
Hydraulic System Type Open center
Implement Pump Flow, gpm (Lpm) 7,8 (29,0)
Steering Pump Flow, gpm (Lpm) 7,7 (28,0)
Total Flow, gpm (Lpm) 15,5 (58,5)
Hydraulic Pressure, Bar (psi) 176 (2550)
Number of Standard Remote Valves 1 to 3
3-Point Hitch Category 2/1
Standard Lift Capacity at lift pin, lb (kg) 4250 (1930)

Dimensions and Weight
Wheelbase, in (mm) 82,7 (2100)
Length, in (mm) 143 (3630)
Height, in (mm) 100 (2530)
Overall Width, in (mm) 70 (1770)
Ground Clearance, in (mm) 15,2 (380)
Operating Weight, lb (kg) 6310 (2870)
Maximum Weight, lb (kg) 9970 (4535)

________________________________________________________________________________________

________________________________________________________________________________________

Farm Tractors Technical Specifications
JD 1026R JD 3650 JD 6400 JD 7810
KUBOTA B7500 KUBOTA L245 KUBOTA L2250 KUBOTA M4072
FORD 1320 FORD 2810 FORD 3930 FORD 5600
MF 250 MF 690 MF 3060 MF 6180
NH TC48DA NH M100 NH T7550 NH 8560
CASE IH 495 CASE IH 1255XL CASE IH 2140 CASE IH 2294