________________________________________________________________________________________

Home / Farm Tractors / Case IH Tractors / Case IH 856XL

Case IH 856 XL Specifications

The Case IH 856 XL utility tractor was manufactured from 1985 to 1987. The Case IH 856XL powertrain system components: a 239 cu.in (3.9 L) International Harvester DT239 four-cylinder direct injection turbocharged diesel engine and IH Total-synchron transmission with 16 forward and 8 reverse gears.

The engine has a cylinder bore of 3.87" (98.4 mm), piston stroke of 5.06" (128.5 mm), and rated power of 85 hp (63.4 kW). The maximum travel speed (forward/reverse): 15.7 mph (25.3 kph) and 10.8 mph (17.4 kph). The open center hydraulic system has a gear pump with a rated capacity of 6.6 gal/min (25 l/min).

The hydraulic pressure is 170 bar (2465 psi). The 2-wheel drive models are equipped with 10.00x16 front tires and 16.9R34 rear tires. The 13.6x24 front tires and 16.9R34 rear tires are used for tractors with 4-wheel drive. The wheelbase is 93.9 (2380 mm) for 2WD models and 92.4 (2340 mm) for 4WD models.

Engine
Engine Model International Harvester DT239
Engine Type 4-stroke, four-cylinder turbocharged diesel
Number of Cylinders 4
Displacement, cu in (L) 239 (3,92)
Engine Bore, in (mm) 3,87 (98,4)
Engine Stroke, in (mm) 5,06 (128,5)
Aspiration Turbocharged
Rated Engine Power, hp (kW) 85,0 (63,4)
Rated Engine Speed, rpm 2300
Maximum Torque, Nm (ft-lbs) 310 (228,6)
Torque Speed, rpm 1600
Fuel System Direct injection
Fuel Tank Capacity, gal (L) 28,0 (106,0)
Oil Capacity, qts (L) 12,7 (12,0)
Coolant Capacity, qts (L) 22,3 (21,0)
Electrical System Rating, Volts 12
Charging System Alternator
Alternator Rating, Amps 33

Power Take-Off
PTO Operational Type Independent
PTO Horsepower, hp (kW) 69,5 (51,4)
PTO Speeds, rpm 540/1000

Transmission
Transmission Type IH-Total-synchron
Gearbox Type 16F/8R
Number of Forward Gears 16
Number of Reverse Gears 8
Transmission Capacity, qts (L) 44,5 (42,0)
Maximum Forward Speed, mph (kph) 15,7 (25,3)
Maximum Reverse Speed, mph (kph) 10,8 (17,4)

Wheels and Tires
Drive Wheels 2WD/4WD
Steering Configuration Front Steer
Steering System Hydrostatic power
Service Brake Wet disc
Front Tire Size 10.00x16
Rear Tire Size 16.9R34

Hydraulic System
Hydraulic System Type Open Center
Implement Pump Flow, gpm (Lpm) 6,6 (25,0)
Hydraulic Pressure, Bar (psi) 170,0 (2465)
Number of Standard Remote Valves 3
3-Point Hitch Category 2
Draft Sensing or Lift Control Position and draft control
Standard Lift Capacity at lift pin, lb (kg) 8710 (3950)

Dimensions and Weight
Wheel Base (2WD), in (mm) 93,9 (2380)
Wheel Base (4WD), in (mm) 92,4 (2340)
Length (2WD), in (mm) 144,9 (3680)
Length (4WD), in (mm) 150,4 (3820)
Height, in (mm) 105,9 (2680)
Clearance (2WD), in (mm) 20,5 (520)
Clearance (4WD), in (mm) 15,9 (400)
Front Tread (2WD), in (mm) 53-72 (1340-1820)
Front Tread (4WD), in (mm) 65-71 (1650-1800)
Rear Tread, in (mm) 62-78 (1570-1980)
Turning radius, in (mm) 169,1 (4300)
Weight (2WD), lb (kg) 8465 (3840)
Weight (4WD), lb (kg) 9080 (4120)

________________________________________________________________________________________

________________________________________________________________________________________

Farm Tractors Technical Specifications
JD 1026R JD 3650 JD 6400 JD 7810
KUBOTA B7500 KUBOTA L245 KUBOTA L2250 KUBOTA M4072
FORD 1320 FORD 2810 FORD 3930 FORD 5600
MF 250 MF 690 MF 3060 MF 6180
NH TC48DA NH M100 NH T7550 NH 8560
CASE IH 495 CASE IH 1255XL CASE IH 2140 CASE IH 2294