Home / Farm Tractors / Case IH Tractors / Case IH MX200 Magnum

Case IH MX200 Magnum Specifications

The Case IH MX 200 is a 2WD or 4WD row-crop tractor from Magnum series. This model was manufactured between 1999 and 2002. The components of Case IH MX200 powerline system: a 505 cubic inches (8.3 L) Cummins 6CTA-8.3 six-cylinder turbocharged intercooled diesel engine with a rated power of 220 hp (164.1 kW), and full power shift transmission with 18 forward and 4 reverse gears, or creeper transmission with 24 forward and 6 reverse gears.

The maximum travel speed (forward/reverse): 21.5 mph (34.6 km/h) and 7.2 mph (11.5 km/h). The closed center hydraulic system includes a piston pump with rated fluid flow of 30 gal/min (113.6 l/min). The hydraulic pressure is 206 bar (2990 psi). The Case IH MX 200 Magnum is equipped with a hydrostatic power steering, differential hydraulic wet disc brakes, 11.00x24 front tyres, and 18.4R46 rear tyres. The wheelbase is 120 in (3050 mm).

Engine Model Cummins 6CTA-8.3
Engine Type 4-stroke, turbocharged intercooled diesel
Number of Cylinders 6
Displacement, cu in (L) 505 (8,3)
Engine Bore, in (mm) 4,49 (114,0)
Engine Stroke, in (mm) 5,32 (135,0)
Aspiration Turbocharged
Intercooled Air cooled
Rated Engine Power, hp (kW) 220,0 (164,1)
Rated Engine Speed, rpm 1700
Maximum Torque, Nm (ft-lbs) 1000 (740)
Torque Speed, rpm 1400
Compression 16.5:1
Fuel Tank Capacity, gal (L) 130,0 (492,0)
Electrical System Rating, Volts 12
Charging System Alternator

Power Take-Off
PTO Operational Type Independent
PTO Horsepower, hp (kW) 165,0 (123,0)
PTO Speeds, rpm 540/1000
PTO / Engine Speeds, rpm 540/1982
PTO / Engine Speeds, rpm 1000/1974

Standard Transmission
Transmission Type Powershift
Gearbox Type 18F/4R, Full power shift
Number of Forward Gears 18
Number of Reverse Gears 4
Clutch Type Electro-hydrauliclly actuated wet discs
Maximum Forward Speed, mph (kph) 21,5 (34,6)
Maximum Reverse Speed, mph (kph) 7,2 (11,5)

Optional Transmission
Transmission Type Powershift with creeper
Gearbox Type 24F/6R, Full powershift with creeper
Number of Forward Gears 24
Number of Reverse Gears 6
Clutch Type Electro-hydrauliclly actuated wet discs
Creeper Type Standard
Maximum Forward Speed, mph (kph) 21,5 (34,6)
Maximum Reverse Speed, mph (kph) 7,2 (11,5)

Wheels and Tires
Drive Wheels 2WD/4WD
Steering Configuration Front Steer
Steering System Hydrostatic power
Service Brake Differential hydraulic wet disc
Front Tire Size 11.00-24
Rear Tire Size 18.4-R46

Hydraulic System
Hydraulic System Type PFC (Closed center pressure flow compensated)
Implement Pump Flow, gpm (Lpm) 30,0 (113,6)
Hydraulic Pressure, Bar (psi) 206 (2990)
Hydraulic Capacity, gal (L) 45,5 (172,2)
Number of Standard Remote Valves 3
3-Point Hitch Category 3/3N
Standard Lift Capacity at lift pin, lb (kg) 20270 (9215)

Dimensions and Weight
Wheelbase, in (mm) 120 (3050)
Length, in (mm) 234 (5950)
Height, in (mm) 124 (3160)
Turning Radius, in (mm) 195 (4950)
Weight (Operating), lb (kg) 19670 (8940)
Weight (Ballasted), lb (kg) 22080 (10040)



Farm Tractors Technical Specifications
JD 1026R JD 3650 JD 6400 JD 7810
FORD 1320 FORD 2810 FORD 3930 FORD 5600
MF 250 MF 690 MF 3060 MF 6180
NH TC48DA NH M100 NH T7550 NH 8560
CASE IH 495 CASE IH 1255XL CASE IH 2140 CASE IH 2294