Home / Farm Tractors / Ford Tractors / Ford 1920

Ford 1920 Tractor Maintenance

The Ford 1920 is a 2WD or 4WD compact utility tractor from twenty compact series. This model was manufactured between 1987 and 2000. The Ford 1920 driveline includes a 121.7 cu.in (2 L) Shibaura N844 four-cylinder naturally aspirated water-cooled diesel engine with a rated power of 32 hp (23.9 kW), and 12x4 unsynchronized gear transmission or 12x12 mechanical shuttle transmission.

The maximum travel speed (forward and reverse): 13.4 mph (21.6 km/h) and 9.2 mph (14.8 km/h). The open center hydraulic system used a gear pump with fluid flow rate of 7.8 gpm (29.5 lpm). The hydraulic pressure is 2130 psi (147 bar).

The 2-wheel drive models are equipped with 5.50x16 front tires and 13.6x24 rear tires. The 4-wheel drive tractors fitted with 7.0x16 or 25x8.5-14 front tires and 13.6x24 or 27x8.5-15 rear tires. The wheelbase is 69.9" (1770 mm). The 1920 tractor is compatible with the following attachments: front-mount Ford 715A snow blower, Ford 7108 front end loader, and Ford 758B backhoe.

Refill Capacities
Engine oil capacity, qts (L) 6.3 (6.0)
Engine coolant capacity, qts (L) 5.9 (5.6)
Transmission/Hydraulic system capacity, gal (L) 7.7 (29.0)
Front axle oil capacity, qts (L) 5.3 (5.0)
Steering oil capacity, qts (L) 1.9 (1.8)

Recommended Oil and Fluid
Engine oil type SAE 15W-40, 10W-30, SAE 10W
Engine coolant type Antifreeze/Coolant
Transmission/Hydraulic fluid type 134D, SAE 10W-30
Front axle oil type 134D, Gearlube 80W-90
Steering oil type 134D, Gearlube LS

Service Intervals
Check engine oil level Every 10 hours
Check the hydraulic/transmission fluid level Every 10 hours
Check engine air filter Every 10 hours
Check coolant level in radiator Every 10 hours
Check battery and clean terminals Every 50 hours
Check front axle oil Every 50 hours
Inspect and adjust alternator belt Every 50 hours
Lubricate axle hub bearings Every 50 hours
Change engine oil Every 100 hours
Clean engine air filter Every 100 hours
Clean engine fuel filter Every 100 hours
Replace engine oil filter Every 200 hours
Replace engine fuel filter Every 200 hours
Adjust parking and service brakes Every 200 hours
Change hydraulic/transmission fluid Every 300 hours
Change front axle lubricant Every 300 hours
Replace hydraulic oil filter Every 300 hours
Change steering oil Every 300 hours
Replace engine air filter Every 500 hours
Check and adjust engine idling Every 500 hours
Check and adjust valve clearance Every 500 hours
Flush cooling system and add new coolant Every 1000 hours

Replacement Parts
Engine oil filter part number 84475542, SBA140516170
Engine fuel filter part number 87300041
Engine air filter part number 86512889, E9NN9601FA
Hydraulic oil filter part number 4245130, 84228983




Farm Tractors Technical Specifications
JD 1026R JD 3650 JD 6400 JD 7810
FORD 1320 FORD 2810 FORD 3930 FORD 5600
MF 250 MF 690 MF 3060 MF 6180
NH TC48DA NH M100 NH T7550 NH 8560
CASE IH 495 CASE IH 1255XL CASE IH 2140 CASE IH 2294