________________________________________________________________________________________
John Deere 1023E Maintenance
The
John Deere 1023E is a 4WD sub-compact utility tractor. This model was
manufactured from 2011 to 2021. The John Deere 1023E tractor is powered by 55.1
cu.in (899 cc) Yanmar 3TNM72 vertical inline 3-cylinder indirect injection
diesel engine with a rated power of 23.5 hp (17.5 kW), or 60.6 cu.in (993 cc)
Yanmar 3TNM74F vertical 3-cylinder indirect injection liquid-cooled diesel
engine with a rated power of 23.9 hp (17.8 kW).
The John Deere 1023E has a 2-range hydrostatic transmission with
infinite forward and reverse gears. Max. travel speed (forward/reverse):
9.1 mph (14.5 km/h). The open center hydraulic system used a gear pump
with rated fluid flow of 3.5 gpm (13.3 lpm). The hydraulic system
pressure is 148 bar (2150 psi). The JD 1023E is equipped with a power
steering system, wet disc brakes, 18x8.50-10 front tires, and
26x12.00-12 rear tires. The wheelbase is 57" (1450 mm).
The tractor is compatible with the following attachments: 54" or 60"
mid-mount 3-blade AutoConnect mower decks, 47" or 54" front-mount
snowblowers, 54" front-mount blade, John Deere D120 front-end loader
with lift capacity to full height of 825 lbs (374 kg),
John Deere H120
front-end loader with lift capacity to full height of 836 lbs (380 kg),
and John Deere 260 backhoe with 2-ft flat digging depth of 72" (1820
mm).
Engine oil capacity, gal (L) |
0.8 (3.0) |
Engine coolant capacity, gal (L) |
1.0 (3.8) |
Hydraulic system capacity, gal (L) |
3.3 (12.3) |
Front axle oil capacity, gal (L) |
0.75 (2.8) |
Recommended Oil and Fluid |
Engine oil type |
Plus-50, Torq-Gard Supreme, SAE 10W-40, 15W-40. API Service category CH-4 or higher |
Engine coolant type |
Cool-Gard Premix or Cool-Gard PG Premix |
Hydraulic/transmission fluid type |
Hy-Gard, JDM J20C, Low Viscosity Hy-Gard, JDM J20D |
Front axle oil type |
Hy-Gard, JDM J20C, Low Viscosity Hy-Gard, JDM J20D |
Check battery and clean terminals |
Every 50 hours |
Check front axle oil level |
Every 50 hours |
Check fluid level in hydraulic tank |
Every 50 hours |
Lubricate axle hub bearings |
Every 50 hours |
Change engine oil |
Every 200 hours |
Replace engine oil filter |
Every 200 hours |
Change hydraulic/transmission fluid |
Every 200 hours |
Replace hydraulic/transmission filter |
Every 200 hours |
Check and service air filter elements |
Every 200 hours |
Inspect and adjust alternator belt |
Every 200 hours |
Replace primary engine air filter |
Every 400 hours |
Replace secondary engine air filter |
Every 400 hours |
Change engine fuel filter |
Every 400 hours |
Check and adjust engine idling |
Every 600 hours |
Change front axle oil |
Every 600 hours |
Adjust parking and service brakes |
Every 600 hours |
Flush cooling system and add new coolant |
Every 1200 hours |
Check and adjust valve clearance |
Every 1200 hours |
Engine oil filter part number |
M806418 |
Engine fuel filter part number |
M801101 |
Inline fuel filter part number |
AM116304 |
Primary engine air filter part number |
M113621 |
Secondary engine air filter part number |
M123378 |
Hydraulic/transmission oil filter part number |
LVA16054 |
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
Farm Tractors Technical Specifications |