________________________________________________________________________________________
John Deere 1026R Maintenance
The
John Deere 1026R is a 4-wheel drive sub-compact utility tractor. This model was
manufactured between 2011 and 2012. The JD 1026R driveline consists of Yanmar
3TNV76 vertical 3-cylinder indirect injection naturally aspirated diesel engine
and 2-range hydrostatic transmission with infinite forward and reverse gears.
A 68.1 cu.in (1.1 L) engine has a cylinder bore of 2.99" (76 mm), piston
stroke of 3.23" (82 mm), and rated power of 25.2 hp (18.5 kW). Max.
travel speed: 4.1 mph (6.6 km/h) using a low range, and 9.1 mph (14.6
km/h) using a high range.
The open center hydraulic system includes a gear pump with a flow rate
of 3.5 gal/min (13.2 l/min). The main relief pressure is 2000 psi (138
bar). The John Deere 1026R was equipped with 18x8.50-10 front tires and
26x12.00-12 rear tires. The wheelbase is 57.1" (1450 mm).
The tractor is compatible with a 54" mid-mount John Deere 54D
AutoConnect mower deck, 60" mid-mount John Deere 60D AutoConnect mower
deck, John Deere D120 loader with lift capacity to max height of 825 lbs
(374 kg), and John Deere H120 loader with ift capacity to max height of
836 lbs (379 kg).
| Engine oil capacity, gal (L) |
0.7 (2.7) |
| Engine coolant capacity, gal (L) |
1.0 (3.8) |
| Hydraulic system capacity, gal (L) |
3.3 (12.3) |
| Front axle oil capacity, gal (L) |
0.75 (2.8) |
| Recommended Oil and Fluid |
| Engine oil type |
Plus-50, Torq-Gard Supreme, SAE 10W-40, 15W-40. API Service category CH-4 or higher |
| Engine coolant type |
Cool-Gard Premix or Cool-Gard PG Premix |
| Hydraulic/transmission fluid type |
Hy-Gard, JDM J20C, Low Viscosity Hy-Gard, JDM J20D |
| Front axle oil type |
Hy-Gard, JDM J20C, Low Viscosity Hy-Gard, JDM J20D |
| Check battery and clean terminals |
Every 50 hours |
| Check front axle oil level |
Every 50 hours |
| Check fluid level in hydraulic tank |
Every 50 hours |
| Lubricate axle hub bearings |
Every 50 hours |
| Change engine oil |
Every 200 hours |
| Replace engine oil filter |
Every 200 hours |
| Change hydraulic/transmission fluid |
Every 200 hours |
| Replace hydraulic/transmission filter |
Every 200 hours |
| Check and service air filter elements |
Every 200 hours |
| Inspect and adjust alternator belt |
Every 200 hours |
| Replace primary engine air filter |
Every 400 hours |
| Replace secondary engine air filter |
Every 400 hours |
| Change engine fuel filter |
Every 400 hours |
| Check and adjust engine idling |
Every 600 hours |
| Change front axle oil |
Every 600 hours |
| Adjust parking and service brakes |
Every 600 hours |
| Flush cooling system and add new coolant |
Every 1200 hours |
| Check and adjust valve clearance |
Every 1200 hours |
| Engine oil filter part number |
M806418 |
| Engine fuel filter part number |
M801101 |
| Inline fuel filter part number |
AM116304 |
| Primary engine air filter part number |
M113621 |
| Secondary engine air filter part number |
M123378 |
| Hydraulic/transmission oil filter part number |
LVA16054 |
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
| Farm Tractors Technical Specifications |
