________________________________________________________________________________________
John Deere 1530 Maintenance
The
John Deere 1530 is a 2WD utility tractor from Generation 2 series. This model
was manufactured between 1973 and 1975. The John Deere 1530 tractor is powered
by 164.4 cu.in (2.7L) JD 3164D 4-stroke 3-cylinder diesel engine. The engine has
a cylinder bore of 4.02" (102 mm), piston stroke of 4.33" (110 mm), and rated
power of 50 hp (37.1 kW).
The John Deere 1530 is fitted with 2 types of transmission. 1st type:
8x4 Collar Shift unsynchronized transmission. 2nd type: Partial power
shift transmission with 16 forward and 8 reverse gears.
The maximum travel speed (forward/reverse): 17.1 mph (27.4 km/h) and 5
mph (8.1 km/h). The closed center hydraulic system used a pump with a
rated capacity of 11 gal/min (41.6 l/min). The hydraulic pressure is 155
bar (2250 psi). The John Deere 1530 tractor was equipped with 6.00x16
front tires and 13.6x28 rear tires. The wheelbase is 74.1 in (1870 mm).
| Engine oil capacity, gal (L) |
1.5 (5.7) |
| Engine coolant capacity, gal (L) |
2.75 (10.4) |
| Hydraulic/Transmission system capacity, gal (L) |
9.5 (36.0) |
| Belt pulley oil capacity, pts (L) |
2.3 (1.1) |
| Recommended Oil and Fluid |
| Engine oil type |
Torq-Gard, MIL-L-2104B, SAE 30, SAE 10W-20, 5W-20. API Service category SD, CC |
| Engine coolant type |
Cool-Gard Premix Coolant |
| Hydraulic/Transmission fluid type |
JD 303 tractor hydraulic fluid |
| Belt pulley oil type |
JD 303 tractor hydraulic fluid or SAE 80 lubricant |
| Check battery and clean terminals |
Every 50 hours |
| Check hydraulic/transmission fluid level |
Every 50 hours |
| Lubricate axle hub bearings |
Every 50 hours |
| Change engine oil |
Every 100 hours |
| Replace engine oil filter |
Every 200 hours |
| Inspect and adjust alternator belt |
Every 200 hours |
| Check belt pulley oil level |
Every 200 hours |
| Clean air cleaner element |
Every 200 hours |
| Change engine fuel filter |
Every 500 hours |
| Check injection timing |
Every 500 hours |
| Replace hydraulic oil filter |
Every 500 hours |
| Change belt pulley oil |
Every 500 hours |
| Adjust parking and service brakes |
Every 500 hours |
| Check and adjust valve clearance |
Every 500 hours |
| Change hydraulic/transmission fluid |
Every 1000 hours |
| Replace air cleaner element |
Every 1000 hours |
| Clean and adjust wheel bearings |
Every 1000 hours |
| Flush cooling system and add new coolant |
Every 1000 hours |
| Engine oil filter part number |
T19044 |
| Engine fuel filter part number |
AR50041 |
| Engine air cleaner part number |
AT20728, AR84228 |
| Hydraulic/transmission oil filter part number |
AR28271, AR75603, AR75601 |
| Hydraulic/transmission filter seal part number |
R34733 |
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
| Farm Tractors Technical Specifications |
