________________________________________________________________________________________
John Deere 2032R Maintenance
The
John Deere 2032R compact utility tractor was manufactured from 2013 to 2021. The
John Deere 2032R driveline consists of Yanmar 3TNV88 4-cycle three-cylinder
direct injection liquid-cooled diesel engine and 2-range hydrostatic
transmission with infinite forward and reverse gears.
A 100.2 cu.in (1.65 L) engine has a cylinder bore of 3.47" (88 mm),
piston stroke of 3.54" (90 mm), and maximum power of 32 hp (23.9 kW).
The maximum forward speed - 13.7 mph (21.9 km/h), max reverse speed -
13.2 mph (21.1 km/h). The open center hydraulic system used a gear pump
with a flow rate of 5 gpm (19 lpm). The hydraulic pressure is 172 bar
(2500 psi). The tractor is equipped with a hydrostatic power steering,
wet disc brakes, 7.00x12 (AG) or 24x8.50-14 (Turf) front tires, and
12.4x16 (AG) or 36x14.00-15 (Turf) rear tires. The wheel base is 65.2"
(1655 mm).
The JD 2032R is compatible with the following attachments: 60", 62", 72"
mid-mount 3-blade mower decks with hydraulic lift system, 54"
front-mount two-stage snow blower, 54" front-mount blade, John Deere
H130 front-end loader with lift capacity to full height of 1027 lbs (465
kg), John Deere 220R front-end loader with lift capacity to full height
of 1120 lbs (508 kg), John Deere 46 backhoe with 2-ft flat digging depth
of 78" (1980 mm), and John Deere 270B backhoe with maximum digging depth
of 84" (2130 mm).
Engine oil capacity, gal (L) |
0.9 (3.4) |
Engine coolant capacity, gal (L) |
1.05 (4.0) |
Hydraulic system capacity, gal (L) |
4.6 (17.5) |
Front axle oil capacity, gal (L) |
1.1 (3.9) |
Recommended Oil and Fluid |
Engine oil type |
Plus-50, Torq-Gard Supreme, SAE 10W-40, 15W-40. API Service category CH or higher |
Engine coolant type |
Cool-Gard Premix or Cool-Gard PG Premix |
Hydraulic/transmission fluid type |
Hy-Gard, JDM J20C, Low Viscosity Hy-Gard, JDM J20D |
Front axle oil type |
GL-5 Gear Lubricant, SAE 80W-90, or Hy-Gard |
Check battery and clean terminals |
Every 50 hours |
Check front axle oil level |
Every 50 hours |
Check hydraulic fluid level |
Every 50 hours |
Lubricate axle hub bearings |
Every 50 hours |
Change engine oil |
Every 200 hours |
Replace engine oil filter |
Every 200 hours |
Change hydraulic/transmission fluid |
Every 200 hours |
Replace hydraulic filter |
Every 200 hours |
Replace transmission filter |
Every 200 hours |
Check and service air filter elements |
Every 200 hours |
Inspect and adjust alternator belt |
Every 200 hours |
Change engine fuel filter |
Every 400 hours |
Replace primary engine air filter |
Every 600 hours |
Replace secondary engine air filter |
Every 600 hours |
Check and adjust engine idling |
Every 600 hours |
Change front axle oil |
Every 600 hours |
Adjust parking and service brakes |
Every 600 hours |
Check and adjust valve clearance |
Every 1200 hours |
Flush cooling system and add new coolant |
Every 2000 hours |
Engine oil filter part number |
M806419 |
Primary fuel filter part number |
M811032, MIU800645 |
Secondary fuel filter part number |
MIU803127 |
Primary engine air filter part number |
M131802 |
Secondary engine air filter part number |
M131803 |
Hydraulic oil filter part number |
LVU800097, LVA14703 |
Transmission oil filter part number |
LVA16054 |
________________________________________________________________________________________
________________________________________________________________________________________
Farm Tractors Technical Specifications |