Home / Farm Tractors / John Deere Tractors / JD 2305

John Deere 2305 Tractor

The John Deere 2305 is a 4-wheel drive sub-compact utility tractor from 2000 Twenty series. This model was manufactured between 2005 and 2010. The John Deere 2305 powertrain system components: a 68.1 cu.in (1.1L) Yanmar 3TNV76 four-cycle three-cylinder indirect injection naturally aspirated liquid-cooled diesel engine with a maximum power of 24.1 hp (18 kW), and 2-range hydrostatic transmission with infinite forward and reverse gears.

The engine has a mechanical fuel injection pump, forced lubrication with trochoid pump, oil filter with single element, air cleaner with dual dry element. The maximum forward speed - 8.3 mph (13.4 km/h), maximum reverse speed - 8 mph (12.8 km/h). The open center hydraulic system includes a gear pump with a rated capacity of 2.9 gal/min (11 l/min). The hydraulic pressure is 137 bar (1990 psi). The John Deere 2305 is equipped with a power steering system, wet disc brakes, 18x8.50-10 front tires, and 26x12.00-12 rear tires. The wheelbase is 57.1" (1450 mm).

Compatible attachments for the John Deere 2305 tractor: 54", 62" mid-mount 3-blade mower decks with cutting height of 1.0-5.0" (25-127 mm) and hydraulic lift system, or John Deere 200CX front-end loader with lift capacity to full height of 902 lbs (409 kg) and breakout force of 2239 lbs (1015 kg).

Engine Model Yanmar 3TNV76
Engine Type 4-cycle three-cylinder indirect injection liquid-cooled diesel
Number of Cylinders 3
Displacement, cu in (L) 68.1 (1.1)
Engine Bore, in (mm) 2.99 (76.0)
Engine Stroke, in (mm) 3.23 (82.0)
Aspiration Naturally aspirated
Maximum Engine Power, hp (kW) 24.1 (18.0)
Rated Engine Speed, rpm 3000
Low Idle Speed, rpm 1170
High Idle Speed, rpm 3170
Compression Ratio 23.4:1
Firing Order 1-3-2
Fuel System Indirect injection
Fuel Filter Replaceable element
Fuel Injection Pump Mechanical, in-line type
Lubrication System Forced lubrication with trochoid pump
Oil Filter Type Single element
Air Cleaner Dual dry element
Fuel Tank Capacity, gal (L) 5.5 (21.0)
Oil Capacity, qts (L) 3.4 (3.2)
Coolant Capacity, qts (L) 3.4 (3.2)
Electrical System Rating, Volts 12
Charging System Alternator
Alternator Rating, Amps 20

Power Take-Off
PTO Operational Type Independent
PTO Horsepower, hp (kW) 18.0 (13.4)
Rear PTO Speed, rpm 540
Rear PTO / Engine Speed, rpm 540/3000
Mid PTO Speed, rpm 2100
Mid PTO / Engine Speed, rpm 2100/3000

Transmission Type Hydrostatic
Number of Forward Gears Infinite (2-range)
Number of Reverse Gears Infinite (2-range)
Oil Capacity, qts (L) 13.6 (12.9)
Maximum Forward Speed (Low Range), mph (kph) 4.1 (6.6)
Maximum Forward Speed (High Range), mph (kph) 8.3 (13.4)
Maximum Reverse Speed (Low Range), mph (kph) 4.1 (6.6)
Maximum Reverse Speed (High Range), mph (kph) 8.0 (12.8)

Wheels and Tires
Drive Wheels 4WD 4x4
Steering Configuration Front steer
Steering System Power Steering
Brakes Type Wet disc
Front Tire Size 18x8.50-10
Rear Tire Size 26x12.00-12
Front Tread, in (mm) 39.6 (1000)
Rear Tread, in (mm) 33.6 (850)

Hydraulic System
Hydraulic System Type Open center
Implement Pump Type Gear
Implement Pump Flow, gpm (Lpm) 2.9 (11.0)
Steering Pump Flow, gpm (Lpm) 2.3 (8.8)
Hydraulic Pressure, Bar (psi) 137 (1990)
Hydraulic Fluid Capacity, gal (L) 3.4 (13.0)
Number of Standard Remote Valves 2
3-Point Hitch Category 1 (Limited)
Lift Capacity at 24" (610mm) behind pin, lb (kg) 680 (309)
Lift Capacity at pin, lb (kg) 1435 (650)

Dimensions and Weight
Wheelbase, in (mm) 57.1 (1450)
Overall Length (with Hitch), in (mm) 102.6 (2605)
Height (Hood), in (mm) 42 (1060)
Height (ROPS), in (mm) 77.5 (1960)
Overall Width, in (mm) 44.9 (1140)
Ground Clearance, in (mm) 7.7 (190)
Weight (Shipping), lb (kg) 1450 (655)
Weight (Operating), lb (kg) 1865 (845)

Front End Loader
Loader Model John Deere 200CX
Maximum Lift Height at Pin, in (mm) 89.5 (2270)
Clearance with Dumped Bucket, in (mm) 58.5 (1480)
Reach at Maximum Height, in (mm) 29.5 (740)
Maximum Dump Angle, deg 38
Maximum Rollback Angle, deg 25
Lift Capacity to Max Height at Pin, lbs (kg) 902 (410)
Lift Capacity to Max Height at 19.7" (0.5m) Ahead of Pin, lbs (kg) 630 (285)
Breakout Force at Pivot Pin, lbs (kg) 2240 (1015)
Breakout Force at 19.7" (0.5m) Ahead of Pin, lbs (kg) 1515 (687)
Bucket Width, in (mm) 53 (1345)

54" Mower Deck
Mower Deck Model John Deere 54C
Mower Deck Type Mid-mount
Number of Blades 3
Cutting Width, in (mm) 54 (1370)
Cutting Height, in (mm) 1.0-5.0 (25-127)
Cut Positions 13
Lift System Hydraulic
Weight, lb (kg) 170 (77)

62" Mower Deck
Mower Deck Model John Deere 62C
Mower Deck Type Mid-mount
Number of Blades 3
Cutting Width, in (mm) 62 (1570)
Cutting Height, in (mm) 1.0-5.0 (25-127)
Cut Positions 13
Lift System Hydraulic
Weight, lb (kg) 200 (90)




Farm Tractors Technical Specifications
JD 1026R JD 3650 JD 6400 JD 7810
FORD 1320 FORD 2810 FORD 3930 FORD 5600
MF 250 MF 690 MF 3060 MF 6180
NH TC48DA NH M100 NH T7550 NH 8560
CASE IH 495 CASE IH 1255XL CASE IH 2140 CASE IH 2294