________________________________________________________________________________________
John Deere 2305 Maintenance
The
John Deere 2305 is a 4-wheel drive sub-compact utility tractor from 2000 Twenty
series. This model was manufactured between 2005 and 2010. The John Deere 2305
powertrain system components: a 68.1 cu.in (1.1L) Yanmar 3TNV76 four-cycle
three-cylinder indirect injection naturally aspirated liquid-cooled diesel
engine with a maximum power of 24.1 hp (18 kW), and 2-range hydrostatic
transmission with infinite forward and reverse gears.
The engine has a mechanical fuel injection pump, forced lubrication with
trochoid pump, oil filter with single element, air cleaner with dual dry
element. The maximum forward speed - 8.3 mph (13.4 km/h), maximum
reverse speed - 8 mph (12.8 km/h). The open center hydraulic system
includes a gear pump with a rated capacity of 2.9 gal/min (11 l/min).
The hydraulic pressure is 137 bar (1990 psi). The John Deere 2305 is
equipped with a power steering system, wet disc brakes, 18x8.50-10 front
tires, and 26x12.00-12 rear tires. The wheelbase is 57.1" (1450 mm).
Compatible attachments for the John Deere 2305 tractor: 54", 62"
mid-mount 3-blade mower decks with cutting height of 1.0-5.0" (25-127
mm) and hydraulic lift system, or John Deere 200CX front-end loader with
lift capacity to full height of 902 lbs (409 kg) and breakout force of
2239 lbs (1015 kg).
Engine oil capacity, gal (L) |
0.85 (3.2) |
Engine coolant capacity, gal (L) |
0.85 (3.2) |
Hydraulic system capacity, gal (L) |
3.4 (13.0) |
Front axle oil capacity, gal (L) |
0.65 (2.5) |
Recommended Oil and Fluid |
Engine oil type |
Plus-50, SAE 10W-40, 15W-40, 10W-30. API Service Category CD, CC, SD |
Engine coolant type |
Cool-Gard Premix or Cool-Gard PG Premix |
Hydraulic/transmission fluid type |
Hy-Gard, JDM J20C, Low Viscosity Hy-Gard, JDM J20D |
Front axle oil type |
GL-5 Gear Lubricant, SAE 80W-90 |
Check battery and clean terminals |
Every 50 hours |
Check front axle oil level |
Every 50 hours |
Check fluid level in hydraulic system |
Every 50 hours |
Lubricate axle hub bearings |
Every 50 hours |
Change engine oil |
Every 200 hours |
Replace engine oil filter |
Every 200 hours |
Change hydraulic/transmission fluid |
Every 200 hours |
Replace hydraulic/transmission filter |
Every 200 hours |
Check and service air filter elements |
Every 200 hours |
Inspect and adjust alternator belt |
Every 200 hours |
Change engine fuel filter |
Every 400 hours |
Replace primary engine air filter |
Every 600 hours |
Replace secondary engine air filter |
Every 600 hours |
Check and adjust engine idling |
Every 600 hours |
Change front axle oil |
Every 600 hours |
Adjust parking and service brakes |
Every 600 hours |
Check and adjust valve clearance |
Every 1200 hours |
Flush cooling system and add new coolant |
Every 2000 hours |
Engine oil filter part number |
M806418 |
Engine fuel filter part number |
M801101 |
Primary engine air filter part number |
M131802 |
Secondary engine air filter part number |
M131803 |
Hydraulic/transmission oil filter part number |
LVA12812 |
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
Farm Tractors Technical Specifications |